Hi guys i have this case, st3000dm001 spin normal, no click sound no noise but stay in bsy and no enter in terminal. In termal i see
Boot 0x40M
Spin Up
Trans.

Spin Up
SpinOK
SnapshotEventOccurred( SNAPSHOT_INITIAL_VALUES ).
(P) SATA Reset

Suggestion ? thanks

Yesterday I happened to reappear that same unit with firmware cc46. If you need the firmware, I have a copy and also the HDD.

_________________
Is Earth an intelligent being?

I don't remember what version I have but if don't is a problem for you, please send me a copy thanks

ok. A greeting.

_________________
Is Earth an intelligent being?

thanks friend

i have see the attachment, the rom its 1024 but my rom is 512 strange

It seems strange that.
My disc carries the pcb: 100762568 REV .: A

_________________
Is Earth an intelligent being?

i have 100717520 revb

Use virtual boot function, one easy step to solve the issue.

Update, I have try another PCB and nothing have change, for virtual start I need 3D any guys have 3d for this disk ? FW is sc48 Thanks

I have tryed now with a 3d founded on internet, i think don't are right because after load 3d stay in BSY
Boot 0x40M
Spin Up
Trans.

---Mrt Loader---
LockCode:0x0C8B187E
LockKey:Recv Loader....Redy
And not enter in level T no reponse. Suggestions ? thanks
In attachment the 3d founded, if any friend have a right 3d, thanks

This is the information of disk : st3000dm001 --- pn 1e6166-570 --- fw sc48 ---- date 14423 site wu

From this page you can download the firmware with a cost of € 1.
http://firmware.hddsurgery.com/index.php

_________________
Is Earth an intelligent being?

Shame on them.

or you can register and download it for free.
Only thing you need is to be a data recovery pro.
What is shame in that?
That we do not let guys who are not competent to play with hard drives?
Do they sell guns to kids?

_________________
HddSurgery - Professional Data Recovery Tools

I think it's correct to pay a symbolic summ to solve a serius problem, Thanks Hddsurgery for this service ! I Have solved a serius problem using this service, 1 euro and many thanks to you

Hi friend thanks to all for helping, I have solved, this is my solution :
I have downloaded from hddsurgery a same firmware from like serial number of disk, I have used mrt virtual start whith sys module 20D and patch BSY, after power off and on I see the level T I haved clear smart and then work . In this time i'm cloning the unit to recover bad partition with rstudio. Thanks to all

Congratulations for the recovery.
Greetings.

_________________
Is Earth an intelligent being?

I think that the purpose of the forum is also sharing, I thank you for the advice, together we can.

Who are you to do not let guys to play with hard drives?
guns and kinds? Are you kidding?
Firmware is not your property so I don't see reason why you are actually selling them? You can tell you are not selling them, but from my side you do and I don't see why your opinion better than my.

what part in register and download them for free you do not understand?

_________________
HddSurgery - Professional Data Recovery Tools