MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Flash storage, SSD

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
einstein9
 Post subject: Sandisk Controller question
PostPosted: July 19th, 2020, 7:11 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2854
Location: Kuwait
Hello guys,,,

I know that Sandisk controllers starts with 82-xxxx
but this one looks diff. here, is this new or something?

thnx


Attachments:
Sandisk.jpg
Sandisk.jpg [ 364.85 KiB | Viewed 12027 times ]

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
HaQue
 Post subject: Re: Sandisk Controller question
PostPosted: July 19th, 2020, 12:27 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3977
Location: Adelaide, Australia
yes they have been coming out for a short while with different numbers like that
Top
 Profile  
 
pcimage
 Post subject: Re: Sandisk Controller question
PostPosted: July 19th, 2020, 14:24 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7865
Location: UK
I’ve not see controllers like that yet, but no doubt will see them soon.

Good thing is that you most likely won’t need to do a “chip off” on this one, looks like a fairly simple soldering job :-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
einstein9
 Post subject: Re: Sandisk Controller question
PostPosted: July 20th, 2020, 2:46 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2854
Location: Kuwait
HaQue wrote:
yes they have been coming out for a short while with different numbers like that


I was thinking MAYBE those are new FAKE sandisk but looks i was wrong...
as you said new controllers category

pcimage wrote:
I’ve not see controllers like that yet, but no doubt will see them soon.

Good thing is that you most likely won’t need to do a “chip off” on this one, looks like a fairly simple soldering job :-)


I wish if that is the case,, tried soldering >> didn`t work ......


Thank you guys... :mrgreen:

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
Blizzard
 Post subject: Re: Sandisk Controller question
PostPosted: July 20th, 2020, 9:43 
Offline
User avatar

Joined: October 21st, 2014, 1:39
Posts: 131
Location: Ellijay, GA
Those are pretty popular here. We have seen quite a few 8200410A1, 820410PA1, and even a 6200410A1. At first glance thought it was just dirty or something, but it's definitely 62.

_________________
Blizzard Data Recovery
Top
 Profile  
 
einstein9
 Post subject: Re: Sandisk Controller question
PostPosted: July 21st, 2020, 2:40 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2854
Location: Kuwait
Blizzard wrote:
Those are pretty popular here. We have seen quite a few 8200410A1, 820410PA1, and even a 6200410A1. At first glance thought it was just dirty or something, but it's definitely 62.


humm,,

I looked @ the solutions in SC but none of those listed were there
probably coming soon there...

Thnx for this too :beer:

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: Sandisk Controller question
PostPosted: July 23rd, 2020, 11:56 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Well,
Sometimes Pros miss a post by newbies lolz -> https://forum.hddguru.com/viewtopic.php ... 05#p281205

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
Blizzard
 Post subject: Re: Sandisk Controller question
PostPosted: July 23rd, 2020, 12:21 
Offline
User avatar

Joined: October 21st, 2014, 1:39
Posts: 131
Location: Ellijay, GA
Amarbir[CDR-Labs] wrote:
Well, Sometimes Pros miss a post by newbies lolz -> https://forum.hddguru.com/viewtopic.php ... 05#p281205
The last one we had (256GB) was a broken controller but had been flexed so bad the NAND and PCB pads were torn. We wired it up and read the data. Unfortunately it was encrypted. Donors are getting more and more important these days since some new devices won't have a chip-off option, they might require a NAND and possibly a controller swap. Similar to the those old Sandisk 1 and 2GB Cruzers that used to be popular.

_________________
Blizzard Data Recovery
Top
 Profile  
 
einstein9
 Post subject: Re: Sandisk Controller question
PostPosted: July 25th, 2020, 2:57 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2854
Location: Kuwait
Amarbir[CDR-Labs] wrote:
Well,
Sometimes Pros miss a post by newbies lolz -> https://forum.hddguru.com/viewtopic.php ... 05#p281205


Am not a Pro. (specially in flashes) but trying to catch up

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Flash storage, SSD

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Ahmed Saeed and 141 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group