View topic - looking for USB 2,5" toshiba drive compatible PCB

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

looking for USB 2,5" toshiba drive compatible PCB

Page 1 of 1

[ 9 posts ]

Previous topic | Next topic

Author

Message

Setlec

Post subject: looking for USB 2,5" toshiba drive compatible PCB

Posted: June 8th, 2021, 9:00

Joined: May 29th, 2020, 19:08
Posts: 110
Location: Tunisia

Hello there,

I'm looking for a PCB USB or sata (compatible) for this HDD in the attached picture.
Model: MQ04UBD200
Rev: AZA AB01/JT000U
Date: 02NOV2018
Serial: Y82ET8L8T HGG HDKBD59AZA01 T
Country: Philippines
Size: 2TB

Please PM me if you have a SATA PCB that is compatible or the same PCB for this drive.
or just leave a post with suggestions or links related.

Thank you for your help.

Attachments:

File comment: toshiba picture

HDD sana.jpg [ 71.63 KiB | Viewed 13051 times ]

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch

Top

Lardman

Post subject: Re: looking for USB 2,5" toshiba drive compatible PCB

Posted: June 8th, 2021, 9:19

Joined: November 7th, 2020, 5:31
Posts: 1305
Location: United Kingdom

Is the pcb G0034A ? Aliexpress or a G4311A should do.

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/

Top

fzabkar

Post subject: Re: looking for USB 2,5" toshiba drive compatible PCB

Posted: June 9th, 2021, 2:15

Joined: September 8th, 2009, 18:21
Posts: 17097
Location: Australia

MQ04ABD200 should be the equivalent SATA model.

_________________
A backup a day keeps DR away.

Top

HddDonorMarket

Post subject: Re: looking for USB 2,5" toshiba drive compatible PCB

Posted: June 9th, 2021, 18:02

Joined: June 16th, 2018, 12:09
Posts: 489
Location: Usa

ACE Forum says G4330A USB>>> G4311A sata

Attention. This PCBs (G4330a ) Rom chip so sensitive. Dying easily when desolder

_________________
Sexy Womans from your town

Top

Setlec

Post subject: Re: looking for USB 2,5" toshiba drive compatible PCB

Posted: June 11th, 2021, 5:58

Joined: May 29th, 2020, 19:08
Posts: 110
Location: Tunisia

HddDonorMarket wrote:

ACE Forum says G4330A USB>>> G4311A sata

Attention. This PCBs (G4330a ) Rom chip so sensitive. Dying easily when desolder

I was thinking in copying the bios and not de-soldering it.

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch

Top

Lardman

Post subject: Re: looking for USB 2,5" toshiba drive compatible PCB

Posted: June 11th, 2021, 6:16

Joined: November 7th, 2020, 5:31
Posts: 1305
Location: United Kingdom

HddDonorMarket wrote:

Attention. This PCBs (G4330a ) Rom chip so sensitive. Dying easily when desolder

I keep seeing this being posted about tosh roms - but nobody ever provides further info. I've not cooked one yet and I've been pretty careless about desoldering them, has anyone actually killed one really or is it just hear say?

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/

Top

Setlec

Post subject: Re: looking for USB 2,5" toshiba drive compatible PCB

Posted: June 11th, 2021, 6:46

Joined: May 29th, 2020, 19:08
Posts: 110
Location: Tunisia

the reference on the PCB is G0034A. Would this G4311A sata be compatible with my client's version?

Attachments:

File comment: HDD PCB

198459840_1156108251540053_1443559338897077603_n.jpg [ 8.36 KiB | Viewed 12832 times ]

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch

Top

msurgeon

Post subject: Re: looking for USB 2,5" toshiba drive compatible PCB

Posted: June 11th, 2021, 20:00

Joined: August 14th, 2008, 10:39
Posts: 257
Location: Morris Plains, New Jersey

Attachment:

Toshiba pcb.jpg [ 127.67 KiB | Viewed 12770 times ]

Easy to convert to SATA. Substitute 1,2,3,5 with 2,3,5,6 on 7 pin SATA connector.

Top

Setlec

Post subject: Re: looking for USB 2,5" toshiba drive compatible PCB

Posted: June 12th, 2021, 7:23

Joined: May 29th, 2020, 19:08
Posts: 110
Location: Tunisia

msurgeon wrote:

Easy to convert to SATA. Substitute 1,2,3,5 with 2,3,5,6 on 7 pin SATA connector.

the Client's PCB is not fully functional, at least the drive spin but nothing more. I've figured that exchanging the PCB would be easier with a Bios transfer than desoldering. Myself i've no experience in electronics, so i'm taking the safest route with my actual skills and knowledge. But thank you for contributing to my issue with your insight.

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch

Top

Page 1 of 1

[ 9 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 193 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum