MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Previous topic | Next topic 
Author Message
Setlec
 Post subject: samsung PCB bios swap?
PostPosted: October 18th, 2021, 7:31 
Offline
User avatar

Joined: May 29th, 2020, 19:08
Posts: 111
Location: Tunisia
Hello there,

I find myself in a bit of doubt lately, I'm acquiring a new SATA PCB BF41-00249B for this drive HM322IX (PCB BF41-00282A), Jared from DataMedics told me to use a sata PCB that is compatible but, I've no clue about how to swap the bios on this board.


But i can't find a guide or tutorial about this version of the PCB and i can't find a EEPROM 25xx or 24XX on the PCB.

Pictures of the drive attached


Attachments:
20210730_155153 (1).jpg
20210730_155153 (1).jpg [ 3.35 MiB | Viewed 13109 times ]
20210730_144849 (1).jpg
20210730_144849 (1).jpg [ 3.24 MiB | Viewed 13109 times ]
20210730_144838 (1).jpg
20210730_144838 (1).jpg [ 2.96 MiB | Viewed 13109 times ]

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch
Top
 Profile  
 
pepe
 Post subject: Re: samsung PCB bios swap?
PostPosted: October 18th, 2021, 10:26 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4813
Location: Hungary
There's no external rom on this one, so you may read and write it to the donor board through serport only.

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
fzabkar
 Post subject: Re: samsung PCB bios swap?
PostPosted: October 18th, 2021, 12:26 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17221
Location: Australia
What is wrong with the original PCB? Sometimes there is an easy fix (eg cold solder joint).

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Setlec
 Post subject: Re: samsung PCB bios swap?
PostPosted: October 18th, 2021, 14:14 
Offline
User avatar

Joined: May 29th, 2020, 19:08
Posts: 111
Location: Tunisia
the drive has very unstable connection with the rapidspar and usb add-on. As you can read below the log of the drive, it does click rarely, and the usb-add on powers down the drive. Then the drive becomes unavailable.


Code:
Info    | 10/18/21 19:00:17 | Connected to RapidSpar DSR***** (ver. RS3.50a). RapidNebula license active until 7/1/2023
Warning | 10/18/21 19:00:17 | Source drive is not powered on. Please power on Source drive on RapidSpar unit or load existing project in target-only mode
Warning | 10/18/21 19:00:17 | Your Windows Defender real-time protection is turned on, which reduces recovery speed in some situations. To turn it off, launch DisableW10AntiSpyware.reg located in RapidSparAssistant directory.
Info    | 10/18/21 19:00:18 | Found USB Add-On 'DSU10455' (version 2.03a/203/200).
Info    | 10/18/21 19:00:41 | Running RapidNebula diagnostics and optimization ...
Warning | 10/18/21 19:00:51 | Nebula Diagnostics Failed
Info    | 10/18/21 19:00:51 | Source drive capacity is not reported. Can't run Media Test
Info    | 10/18/21 19:02:22 | Loading project ...
Error   | 10/18/21 19:04:31 | Failed to create project. Please run Nebula Diagnostics first and try again
Info    | 10/18/21 19:05:17 | Source: USB2.0 device
Info    | 10/18/21 19:05:17 | SCSI Product: 'Apollo UX'
Info    | 10/18/21 19:05:17 | SCSI Serial Number: '152D20329000'
Info    | 10/18/21 19:05:17 | Capacity: 298.1 GB (625142448 LBAs)
Info    | 10/18/21 19:06:04 | Source: USB2.0 device
Info    | 10/18/21 19:06:04 | SCSI Product: 'Apollo UX'
Info    | 10/18/21 19:06:04 | SCSI Serial Number: '152D20329000'
Info    | 10/18/21 19:06:04 | Capacity: ?
Info    | 10/18/21 19:06:43 | Source: USB2.0 device
Info    | 10/18/21 19:06:43 | SCSI Product: ''
Info    | 10/18/21 19:06:43 | SCSI Serial Number: '152D20329000'
Info    | 10/18/21 19:06:43 | Capacity: ?
Info    | 10/18/21 19:06:44 | Source: USB2.0 device
Info    | 10/18/21 19:06:44 | SCSI Product: 'Apollo UX'
Info    | 10/18/21 19:06:44 | SCSI Serial Number: '152D20329000'
Info    | 10/18/21 19:06:44 | Capacity: ?
Info    | 10/18/21 19:06:54 | Source: USB2.0 device
Info    | 10/18/21 19:06:54 | SCSI Product: ''
Info    | 10/18/21 19:06:54 | SCSI Serial Number: '152D20329000'
Info    | 10/18/21 19:06:54 | Capacity: ?
Info    | 10/18/21 19:07:00 | Source: USB2.0 device
Info    | 10/18/21 19:07:00 | SCSI Product: ''
Info    | 10/18/21 19:07:00 | SCSI Serial Number: '('
Info    | 10/18/21 19:07:00 | Capacity: ?
Info    | 10/18/21 19:07:16 | Source: USB2.0 device
Info    | 10/18/21 19:07:16 | SCSI Product: 'Apollo UX'
Info    | 10/18/21 19:07:16 | SCSI Serial Number: '('
Info    | 10/18/21 19:07:16 | Capacity: ?
Info    | 10/18/21 19:07:52 | Source: USB2.0 device
Info    | 10/18/21 19:07:52 | SCSI Product: 'Apollo UX'
Info    | 10/18/21 19:07:52 | SCSI Serial Number: '152D20329000'
Info    | 10/18/21 19:07:52 | Capacity: ?

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch
Top
 Profile  
 
Setlec
 Post subject: Re: samsung PCB bios swap?
PostPosted: October 18th, 2021, 14:29 
Offline
User avatar

Joined: May 29th, 2020, 19:08
Posts: 111
Location: Tunisia
pepe wrote:
There's no external rom on this one, so you may read and write it to the donor board through serport only.

pepe


Sorry but i'm unfamiliar about serport. Could you explain it to me please?

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch
Top
 Profile  
 
fzabkar
 Post subject: Re: samsung PCB bios swap?
PostPosted: October 18th, 2021, 15:12 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17221
Location: Australia
Setlec wrote:
pepe wrote:
There's no external rom on this one, so you may read and write it to the donor board through serport only.

pepe


Sorry but i'm unfamiliar about serport. Could you explain it to me please?

Serial port / UART / terminal.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Setlec
 Post subject: Re: samsung PCB bios swap?
PostPosted: October 18th, 2021, 16:59 
Offline
User avatar

Joined: May 29th, 2020, 19:08
Posts: 111
Location: Tunisia
oh i've got an USB device to that but never used...

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch
Top
 Profile  
 
pepe
 Post subject: Re: samsung PCB bios swap?
PostPosted: October 18th, 2021, 17:52 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4813
Location: Hungary
In fact, it is possible to program the target board through SATA as well, once it comes readz, but you need to read it first. ...and will also need a flash loader, if you have no tools that support writing rom on this family.

_________________
Adatmentés - Data recovery
Top
 Profile  
 
gameboybin
 Post subject: Re: samsung PCB bios swap?
PostPosted: February 1st, 2024, 5:00 
Offline

Joined: April 17th, 2022, 22:39
Posts: 261
Location: Vietnam
Can anyone tell me how to solder the SATA port to this exact PCB???

I have same issue. It is very slow and having IO issues through USB. I want to convert that USB to SATA so i can plug it in PC3000 and run it from there
Top
 Profile  
 
fzabkar
 Post subject: Re: samsung PCB bios swap?
PostPosted: February 1st, 2024, 12:52 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17221
Location: Australia
gameboybin wrote:
Can anyone tell me how to solder the SATA port to this exact PCB???

In general, locate the SATA Tx/Rx differential pairs that run between the bridge and MCU. There will be 4 capacitors somewhere along these traces. Remove these capacitors and solder your SATA wires at the MCU end of each capacitor. Use the equivalent SATA PCB to identify the order of these wires by following the path from MCU to SATA connector.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
SWM
 Post subject: Re: samsung PCB bios swap?
PostPosted: February 1st, 2024, 15:14 
Offline

Joined: February 22nd, 2023, 13:49
Posts: 339
Location: Eastern Europe
JM20329
21 - RXP(+)
22 - RXN(-)
25 - TXN(-)
26 - TXP(+)
Capacitors next to the chip JM2039.
They are usually unsoldered and placed (soldered) vertically on contact from the CPU.
SATA lines are soldered to the top contact.
Top
 Profile  
 
fzabkar
 Post subject: Re: samsung PCB bios swap?
PostPosted: February 1st, 2024, 15:47 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17221
Location: Australia
Use this photo as a guide for the SATA Tx/Rx pairs.

https://recuperodatos.com/sites/default/files/webform/donantes/02311-PCB.jpg

Converting a USB HDD PCB to SATA:

https://www.hddoracle.com/viewtopic.php?p=22476#p22476

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 274 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group