MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Previous topic | Next topic 
Author Message
Data-Salvage
 Post subject: wesern digital WD10SPZX no ID after translator regeneration
PostPosted: January 18th, 2024, 3:01 
Offline

Joined: November 28th, 2021, 22:35
Posts: 162
Location: japan
hello guys im working on this palmer disk with second sevel translator damaged.zero data 95%
i did the translator regeneration and i got zero data 18% ....however after i wrote the new 190 module and restart the hdd has no ID and no capacity.......... does anyone had same problem?
Top
 Profile  
 
LostDataSa
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: January 18th, 2024, 19:36 
Offline

Joined: December 23rd, 2013, 9:56
Posts: 202
Location: Saudi Arabia
seems something else damaged
even thought mdl 190 is damaged you will still get full ID
Top
 Profile  
 
Data-Salvage
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: January 18th, 2024, 22:36 
Offline

Joined: November 28th, 2021, 22:35
Posts: 162
Location: japan
Sir thank you for your time

i can get full ID and capacity if i write the original 190 module! but when ever i write the correct module hard disk click once and get ready without ID and without capacity!
Top
 Profile  
 
digisupport
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: January 20th, 2024, 18:13 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 627
Location: Kolding | Denmark
You need to carefully repair and restore the translator.
Regenerating is almost never an option in modern SMR drives.

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk
Top
 Profile  
 
Data-Salvage
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: January 21st, 2024, 11:35 
Offline

Joined: November 28th, 2021, 22:35
Posts: 162
Location: japan
Sir im using the new fuction of data extractor 7.0 but when i write the new translator i do not get ID and capacity
Top
 Profile  
 
pepe
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: January 23rd, 2024, 14:45 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
people should not write anything to SA of these drives, you practically kill any chance for someone with proper knowledge recover the thing.
PC3k has a bug with reading 190 too, so if you write that back you (and anyone after that point) are busted .
you need to understand how these work, which is not a simple task i admit.

_________________
Adatmentés - Data recovery
Top
 Profile  
 
Data-Salvage
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: January 23rd, 2024, 21:06 
Offline

Joined: November 28th, 2021, 22:35
Posts: 162
Location: japan
pepe wrote:
people should not write anything to SA of these drives, you practically kill any chance for someone with proper knowledge recover the thing.
PC3k has a bug with reading 190 too, so if you write that back you (and anyone after that point) are busted .
you need to understand how these work, which is not a simple task i admit.


i just did what is written in this page from acelab Sir.........


https://blog.acelab.eu.com/how-to-fix-t ... rsion.html

do they teach a wrong way for this drive? i dont get what part did i do wrong Sir? can you be more specific?
Top
 Profile  
 
northwind
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: January 24th, 2024, 4:30 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
To me, this article should be taken down from public view.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
Data-Salvage
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: January 24th, 2024, 5:21 
Offline

Joined: November 28th, 2021, 22:35
Posts: 162
Location: japan
northwind wrote:
To me, this article should be taken down from public view.


if make the recovery worse indeed they shouldtake it down Sir
as expert can you share the correct solution Sir?
Top
 Profile  
 
Data-Salvage
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: January 24th, 2024, 5:22 
Offline

Joined: November 28th, 2021, 22:35
Posts: 162
Location: japan
pepe wrote:
people should not write anything to SA of these drives, you practically kill any chance for someone with proper knowledge recover the thing.
PC3k has a bug with reading 190 too, so if you write that back you (and anyone after that point) are busted .
you need to understand how these work, which is not a simple task i admit.



can you share your solution Sir?
Top
 Profile  
 
gameboybin
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: December 6th, 2024, 13:16 
Offline

Joined: April 17th, 2022, 22:39
Posts: 204
Location: Vietnam
I am having the same case. WD10SPZX clicks, swapped heads. Got ready but has no ID, PC3000 boots in Kernel mode
So i am curious to find the solution here
Top
 Profile  
 
Zero Alpha
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: December 9th, 2024, 2:27 
Offline
User avatar

Joined: April 7th, 2009, 21:36
Posts: 487
gameboybin wrote:
I am having the same case. WD10SPZX clicks, swapped heads. Got ready but has no ID, PC3000 boots in Kernel mode
So i am curious to find the solution here


You should start your own thread instead of digging up an old one as you have a completely different problem.

_________________
Zero Alpha: zeroalpha.com.au
Find Cheap Donor Drives App: https://www.zeroalpha.com.au/donor-drive-app Updated February 2026
Top
 Profile  
 
gameboybin
 Post subject: Re: wesern digital WD10SPZX no ID after translator regenerat
PostPosted: December 9th, 2024, 11:05 
Offline

Joined: April 17th, 2022, 22:39
Posts: 204
Location: Vietnam
Zero Alpha wrote:
gameboybin wrote:
I am having the same case. WD10SPZX clicks, swapped heads. Got ready but has no ID, PC3000 boots in Kernel mode
So i am curious to find the solution here


You should start your own thread instead of digging up an old one as you have a completely different problem.


Thanks for the reply. I did started a new thread. Even a year ago with a different but similar case, No one responded

https://forum.hddguru.com/viewtopic.php?f=1&t=44928
https://forum.hddguru.com/viewtopic.php?f=11&t=43881
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 48 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group