View topic - Rosewood A5 Busy & LED dignostics

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Rosewood A5 Busy & LED dignostics

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

MISU

Post subject: Rosewood A5 Busy & LED dignostics

Posted: August 1st, 2024, 1:38

Joined: November 1st, 2023, 13:36
Posts: 69
Location: Data Recovery

This disk doesn't make clicking noise neither spin down can it get fixed on FW level or the issue is deeper with Heads
Model - Seagate 2.5" Barracuda (Rosewood A5) ST1000LM048

Attachments:

1.PNG [ 45.14 KiB | Viewed 5176 times ]

Top

northwind

Post subject: Re: Rosewood A5 Busy & LED dignostics

Posted: August 1st, 2024, 3:26

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece

MISU wrote:

can it get fixed on FW level

Most probably yes.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Top

MISU

Post subject: Re: Rosewood A5 Busy & LED dignostics

Posted: August 1st, 2024, 3:53

Joined: November 1st, 2023, 13:36
Posts: 69
Location: Data Recovery

northwind wrote:

MISU wrote:

can it get fixed on FW level

Most probably yes.

Thanks northwind
I will unlock & give it a try

Top

MISU

Post subject: Re: Rosewood A5 Busy & LED dignostics

Posted: August 2nd, 2024, 1:37

Joined: November 1st, 2023, 13:36
Posts: 69
Location: Data Recovery

Disk stays in busy state & is not coming to terminal . Does this case needs anything extra like shorting

Top

michael chiklis

Post subject: Re: Rosewood A5 Busy & LED dignostics

Posted: August 2nd, 2024, 2:10

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

Verify your 3D virtual loader version with your rom version, they must match.
You can compare theyr date, if 3D and rom date are the same then it means that your 3D loader is compatible with your drive.

Watch this video i made:
https://www.youtube.com/watch?v=P2Fcr71LUqs

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

michael chiklis

Post subject: Re: Rosewood A5 Busy & LED dignostics

Posted: August 2nd, 2024, 8:22

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

Sorry, i wasn't clear.
To match 3D loader and rom versions, you need to compare patient rom with donor drive rom.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

MISU

Post subject: Re: Rosewood A5 Busy & LED dignostics

Posted: August 2nd, 2024, 11:56

Joined: November 1st, 2023, 13:36
Posts: 69
Location: Data Recovery

michael chiklis wrote:

Sorry, i wasn't clear.
To match 3D loader and rom versions, you need to compare patient rom with donor drive rom.

A unique solution ,I was not aware of this. Thanks a lot for sharing.

Top

Page 1 of 1

[ 7 posts ]

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: gps31 and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum