hello i have this urgent case with broken pcb
iv changed the pcb. with a donor ...the HDD become ready but cant read any sectors!
do i also need to solder the ram IC on the hdd ? or the smooth IC? are the head adaptived in the ram IC?

yeah, i suppose you need to transfer adaptives at the least.
would it be hard to post a pic about the pcb?

_________________
Adatmentés - Data recovery

Hello Sir iv soldered back the ROMS to the original pcb and soldered back to the donor
now both HDD get ready but cannot access the sector ! im shocked

Did you dump the ROMs, or did you just solder them? In any case, could you dump all 4 ROMs? I have written a tool that can parse the contents.

_________________
A backup a day keeps DR away.

Dear fzabkar thank you for your super fast answer
i just replaced the rom did not dumped! which tool do you use to dumb this type of ROM chip?

My software extracts all the firmware modules from a HGST ROM.

https://www.hddoracle.com/viewtopic.php?p=23963#p23963

_________________
A backup a day keeps DR away.

how do i Run your Software Sir?

My tools run in a CMD window. They extract the components from your HGST ROM dumps. You need to dump the ROMs, then my tool will analyse your .BIN files.

_________________
A backup a day keeps DR away.

thank you i will buy a proper adapter but im not sure my programmer can read it...
my programmer is GZUt one pro

http://www.dream-e.com/Pshow.asp?Pid=44

im planning to buy this adapter USON8-4X3-XG ^^ do you think is suitable??

https://www.aliexpress.com/item/1005007 ... e-home.0.0

may i ask ? in the case my programmer doesnt work is there any cheaper programmer you can suggest?

again sorry for milion of questions... im still a beginer

excuse me Sir but im unable to use your amazing tool. is there any manual or video tutorial? sadly when i double click on the EXE nothing happened...
just in case this is my two rooms. how can i fix them?

https://drive.google.com/drive/folders/ ... sp=sharing

Sir i could finally open your amazing tool with CMD .
i dragged the ROMs one by one on CMD and i the HEX editor opened automatically^^
should i save this two ROMs and write it on the CHIPs?

just in case this is my two rooms.

https://drive.google.com/drive/folders/ ... sp=sharing

thank you for your patience

does your tool repair the room atumatically or should i do anything on the rom? that appear ?

Sir does your tool repair the room atumatically or should i do anything on the rom? that appear ?

can you take a look at the rom backup?

No, it doesn't. And in your situation, it is not ROM issue. Same problem you get if connect only PCB. User area access is different story. Do you hear long double recalibration of you hard drive or it became ready within a second?

_________________
Angel Data Recovery

The OP damaged a good donor drive by using its PCB on the patient without a ROM transfer. Doesn't this imply that something was written to the donor ROM by the patient drive? I assume that the donor is still spinning.

_________________
A backup a day keeps DR away.

or the preamp is dead and killed both pcbs...

_________________
Adatmentés - Data recovery

Here is another thread where a donor drive was damaged after the OP messed about with ROMs:

https://forum.hddguru.com/viewtopic.php?f=1&t=44071

_________________
A backup a day keeps DR away.

thank you for the kind answer
is bit long recalibration but not weird sounds

Sir i did the rom CHIP swap! both hdd are spinning! both hdd had data access before the swap

thank you for the message Sir
does swap the rom chip kill the preamp? both HDD are spinning and get ready without any weird sound