View topic - HM321HI PCB replaced

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

HM321HI PCB replaced - Not discovered

Page 1 of 1

[ 8 posts ]

Previous topic | Next topic

Author

Message

lenisko

Post subject: HM321HI PCB replaced - Not discovered

Posted: February 10th, 2025, 16:20

Joined: February 10th, 2025, 15:51
Posts: 5
Location: Poland

Hey there!

I'm new so please bear with me ,)

My patient wasn't used for ~10 years and is not detected by OS at all.

Drive details:
HM321HI 320G, Rev A
F/W: 2AJ10002
PCB: BF41-00315A 05
SN: S2HZJ9FB211500
SEC SN: CNBA5902759B00CB12N1325

I managed to get the same drive (working, bad sectors) and made ROM backups for both (confirming dump was successful).

At first, I tried moving a patient ROM content to donor and put donor PCB to a patient drive - no luck, device still wasn't detected.
After that, I flashed a donor ROM to a patient, and put patient PCB to donor and booted a donor drive just fine - I guess that prove that issue is either patient ROM or mechanics itself?

Since I have no idea how to confirm if patient ROM is fine or corrupted nor if that's doable to recover it without any advanced hardware, I've attached ROM dumps in post.

Also leaving dmesg content:

Code:

[  265.342182] ata9.00: qc timeout after 5000 msecs (cmd 0xec)
[  265.342215] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[  265.342221] ata9.00: revalidation failed (errno=-5)
[  265.494151] ata6: link is slow to respond, please be patient (ready=0)
[  267.526113] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  267.626333] ata9.00: configured for UDMA/133
[  309.853171] ata6: hardreset failed
[  309.853175] ata6: reset failed, giving up
...
[ 1397.622315] ata6: link is slow to respond, please be patient (ready=0)
[ 1397.676349] ata9: link is slow to respond, please be patient (ready=0)
[ 1401.941222] ata9: found unknown device (class 0)
[ 1402.094254] ata9: found unknown device (class 0)
[ 1402.094287] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1407.582079] ata9.00: qc timeout after 5000 msecs (cmd 0xec)
[ 1407.582111] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 1407.582117] ata9.00: revalidation failed (errno=-5)
[ 1407.656042] ata6: link is slow to respond, please be patient (ready=0)
[ 1409.453955] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1409.543077] ata9.00: configured for UDMA/133
[ 1446.972011] ata6: limiting SATA link speed to 1.5 Gbps
[ 1452.011882] ata6: hardreset failed
[ 1452.011895] ata6: reset failed, giving up

I would like to ask for guidance or ideas,
Thanks in advance!

Attachments:

HM321HI-ROMs.zip [1 MiB]
Downloaded 135 times

Top

fzabkar

Post subject: Re: HM321HI PCB replaced - Not discovered

Posted: February 10th, 2025, 21:42

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia

Show us a terminal log.

How to connect a terminal adaptor on a Samsung drive ?

https://www.hddoracle.com/viewtopic.php?f=116&t=189

I'm assuming that the patient ROM spins the drive.

_________________
A backup a day keeps DR away.

Top

lenisko

Post subject: Re: HM321HI PCB replaced - Not discovered

Posted: February 10th, 2025, 22:44

Joined: February 10th, 2025, 15:51
Posts: 5
Location: Poland

Thanks for instructions. I believe it spins and sound just fine, attached bootup recording just in case.

And here's output from term

Code:

ActiveFW : 00
                FWVer : 0001
                            SATA PLL cal done

                                             DDR size detected = 8MB
                                                                    *PA VID=0007 PN=0000 Rev=0004
                 *PA VID=0007 PN=0000 Rev=0004
                                              U
S_0SSC EN
SO_1
SSC EN
IS=4
CLA #36/59
Handoff RPM=763
SPOK
SR:53 SS:00000280
mS1 00000003
A1O=123 A1G=433
O=511 S=-1
SK C:  6042 H:0
Loaded FIT ( 0: 0: 1)
CalibTable Loaded. Rev:0x1B
ResoTable Loaded. Rev:0x01
RRO1xTable Loaded. Rev:0x01
Fw Active 0000
| 115 | MOVLY001 |  1 | 0 |   10 | 1140 |

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1008 H:1
X04:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   814 H:1
X05:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   878 H:1
X07:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1014 H:1
X0E:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   820 H:1
X0F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1088 H:1
X13:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   812 H:1
SR:1
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   818 H:1
X15:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
AP:1 C:   818->   812 H:1->1 AP Cnt: 0
SK C:   948 H:1

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1088 H:1
X19:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1042 H:1
X1D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1064 H:1
X20:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1009 H:1
X25:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   940 H:1
X30:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   974 H:1
X3A:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   958 H:1
X3D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SK C:   808 H:1

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   979 H:1
X3F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   953 H:1
X42:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
AP:1 C:   953->   812 H:1->1 AP Cnt: 0
SK C:   815 H:1

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   843 H:1
SR:1
AP:1 C:   843->   812 H:1->1 AP Cnt: 0
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
SoUL!
PK_3   C:   731 H:1
A1O=123 A1G=435
O=511 S=-4
SK C:  6147 H:0
SR:2
AP:2 C:  6147->   812 H:1->1 AP Cnt: 1
SK C:   857 H:1
X45:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1516 H:1
X4E:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1230 H:1
X53:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1207 H:1
X58:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1086 H:1
X5A:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1165 H:1
X5D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   932 H:1
X5F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1096 H:1
X64:00001.1.00C|0001 05E2 L000000003 r:0AFF p0000 s000C l0001 0000/0001

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   877 H:1
X66:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   979 H:1
X04:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   864 H:1
X0F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   818 H:1
X12:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1023 H:1
X19:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1282 H:1
X1C:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
X1D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   851 H:1

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1107 H:1
X20:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   972 H:1
X22:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1030 H:1
X23:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   957 H:1
X25:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   957->   812 H:1->1 AP Cnt: 1
SK C:  1066 H:1
X26:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   992 H:1
X29:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1034 H:1
X2A:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   995 H:1
SR:1
AP:1 C:   995->   812 H:1->1 AP Cnt: 1
SK C:   812 H:1
X2D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1008 H:1
X31:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1032 H:1
X33:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   819 H:1
X34:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   972 H:1
X36:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   814 H:1
X37:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   817 H:1
X39:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1012 H:1
X40:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1066 H:1
X42:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1027 H:1
X44:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   940 H:1
SR:1
AP:1 C:   940->   812 H:1->1 AP Cnt: 1
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
SoUL!
PK_3   C:   731 H:1
A1O=123 A1G=435
O=511 S=-2
SK C:  5993 H:0
X46:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1699 H:1
X48:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1126 H:1
X4B:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1355 H:1
X4E:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1166 H:1
X50:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1156 H:1
X55:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   823 H:1
X56:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_2 00000FFF 00000098 00000000 00000000SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   823 H:1
SR:1
AP:1 C:   823->   812 H:1->1 AP Cnt: 2
SK C:   822 H:1
X57:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   991 H:1
X59:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   981 H:1
SR:1
AP:1 C:   981->   812 H:1->1 AP Cnt: 2
SK C:   808 H:1
X5C:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1176 H:1
X5E:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   912 H:1
X60:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   811->   812 H:1->1 AP Cnt: 2
SK C:  1041 H:1
X63:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1006 H:1
X01:00001.1.00A|018C 05E0 L000000001 r:0AFF p0000 s000A l018C 0000/018C

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   961 H:1
X03:00001.1.00A|018C 05E0 L000000001 r:0AFF p0000 s000A l018C 0000/018C

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1104 H:1
X04:00001.1.00A|018C 05E0 L000000001 r:0AFF p0000 s000A l018C 0000/018C

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1099 H:1
X04:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
X05:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
X06:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   982 H:1
X07:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   819 H:1
X0F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SK C:   812 H:1
SR:0
AP:2 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   816 H:1
X13:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   819 H:1
X15:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   948 H:1
X19:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1001 H:1
X1A:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1027 H:1
X1C:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1108 H:1
X1F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1052 H:1
X21:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   991 H:1
X23:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1001 H:1
X28:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1008 H:1
X2D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   960 H:1
SR:1
AP:2 C:   960->   812 H:1->1 AP Cnt: 2
SK C:   811 H:1
X2F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   962 H:1
SR:1
AP:1 C:   962->   812 H:1->1 AP Cnt: 2
SK C:   808 H:1
X31:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1044 H:1
X33:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   815 H:1
X34:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   976 H:1
X36:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1101 H:1
X39:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   883 H:1
SR:1
AP:1 C:   883->   812 H:1->1 AP Cnt: 2
SK C:   811 H:1
X3B:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   985 H:1
X3D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   970 H:1
X3F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   976 H:1
SR:1
AP:2 C:   976->   812 H:1->1 AP Cnt: 2
SK C:   815 H:1
X41:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   998 H:1
X43:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1046 H:1
X48:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   814 H:1
X49:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   984 H:1
SR:1
AP:2 C:   984->   812 H:1->1 AP Cnt: 2
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
SoUL!
PK_3   C:   739 H:1
A1O=123 A1G=435
O=511 S=-1
SK C:  5990 H:0
X4F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:  1623 H:1
X52:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:2 C:   812->   812 H:1->1 AP Cnt: 3
SK C:  1007 H:1
X54:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:   813 H:1
X57:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:  1076 H:1
X5B:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:   882 H:1
SR:1
AP:1 C:   882->   812 H:1->1 AP Cnt: 3
SK C:   812 H:1
X5D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:   979 H:1
X5F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:   868 H:1
X61:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
| 115 | MOVLY001 |  1 | 1 |   10 | 0996 |
Overlay file read bad
E:00001
eng>

Attachments:

HM321HI-boot-sound.zip [522.03 KiB]
Downloaded 146 times

Top

fzabkar

Post subject: Re: HM321HI PCB replaced - Not discovered

Posted: February 10th, 2025, 23:33

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia

lenisko wrote:

Code:

| 115 | MOVLY001 |  1 | 0 |   10 | 1140 |
...
| 115 | MOVLY001 |  1 | 1 |   10 | 0996 |
Overlay file read bad
E:00001
eng>

This means that the drive can't load the main overlay code from the reserved firmware area on the platters.

_________________
A backup a day keeps DR away.

Top

lenisko

Post subject: Re: HM321HI PCB replaced - Not discovered

Posted: February 10th, 2025, 23:37

Joined: February 10th, 2025, 15:51
Posts: 5
Location: Poland

Is there anything I can do with that having somehow working donor? Or it's lost case?

Top

lenisko

Post subject: Re: HM321HI PCB replaced - Not discovered

Posted: February 13th, 2025, 22:03

Joined: February 10th, 2025, 15:51
Posts: 5
Location: Poland

Would Hot-Swap method work in this case? Or there's a better alternative?

Top

pepe

Post subject: Re: HM321HI PCB replaced - Not discovered

Posted: February 14th, 2025, 2:43

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary

H1 is also bad, possibly the surface too, so i would not torture it much if data is important.
job for a pro...

_________________
Adatmentés - Data recovery

Top

lenisko

Post subject: Re: HM321HI PCB replaced - Not discovered

Posted: May 30th, 2025, 13:50

Joined: February 10th, 2025, 15:51
Posts: 5
Location: Poland

Hey there!

Confirmed that most of the data was safe on other medium but would like to dig into remainings.

Can someone guide me briefly how could I process with hot-swap? I don't have professional equipment except a terminal adaptor and a screwdriver.
I would like to get a raw dump of anything that would be somehow readable in there, and process with PhotoRec afterward.

Top

Page 1 of 1

[ 8 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 48 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum