Thank you both for your posts. I've read the ground pin documentation you provided and will use that going forward.
Pepe, I get ABR when reading via ATA and if I use terminal (HDD translates) I get encrypted data.
Code:
Family:................................. : Charger 2.5"
Techno mode key......................... : Ok
HDD Status sector....................... : Ok
RAM:
System controller (SoC)................. : 88i1053A0 0x(5460)
HDD Info reading........................ : Ok
Heads number............................ : 4
Cyl Count............................... : 384
ROM:
Read ROM................................ : Ok
ROM Data size........................... : 1024 Kb
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 0
SA regions address...................... : by default
SA regions address (RAM)................ : by default
Module 02 access........................ : Granted
WWN..................................... : 50014EE2C001B5A4
SA SPT.................................. : 1860
SA Translator loading................... : Ok
SA defects assigned..................... : 4
ROM Modules:
ROM version............................. : 06.8MD
Module 4F F/W version................... : 0076008M
Overlay F/W version..................... : 06.8ND
Servo F/W version....................... : 04.09
Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3
Relocations............................. : 0 (2 501)
Read ROM DCM............................ : Ok
Power up log reading.................... : Ok
Power up load dir data.................. : Yes
Power up load permovl................... : Yes
Power up load CFG data.................. : Yes
----+------+--------+------------------+----------+----------------------------------------------
NN | Step | Time | Flags | Info | Description (64-bits)
----+------+--------+------------------+----------+----------------------------------------------
68 | 227 | 4.64 s | 14000401217FFDFF | 51043746 | Load GPD-List (13A)(FM ERR NOT FOUND IN DIR)
89 | 223 | 5.47 s | 1C2884216FFFFDFF | 51043D9C | End Process 190(GPD-List (13A) not found)
----+------+--------+------------------+----------+----------------------------------------------
Service area:
SA dir reading (ID)..................... : Ok
Dir items loaded........................ : 611
SA Access............................... : Copy 0,Copy 1
Configuration reading................... : Ok
CFG tech mode lock...................... : No
Self encryption drive................... : Yes (Attention! SED mode is active in 02)
SED Info read........................... : Ok
Master Password......................... : Yes
User Password........................... : No
SED tech mode lock...................... : No
UA writing.............................. : Blocked
DCM in module 47........................ : ZP
DCM in module 0A........................ : |R|NZPGCN6
DCM in module 02........................ : S|BRL|PNMZHPCGRCVNKUUG
To be able to create utilty based DE task, start "Prepare to get UA PBA access"