MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 25 posts ]  Go to page Previous  1, 2
  Previous topic | Next topic 
Author Message
Pandemicc
 Post subject: Re: wd80emzz-11b4fb0 won't even spin after 19v adapter
PostPosted: September 1st, 2025, 6:29 
Offline

Joined: February 2nd, 2023, 19:01
Posts: 90
fzabkar wrote:
Yes, you can use those. The difference is probably in the power rating.

SMAJ12A -> 400W
SMBJ12A -> 600W
SMCJ12A -> 1500W

I don't understand why your Schottky rectifier failed. They are normally rated at 1A 40V. Perhaps yours was a 20V part.

BTW I transferred TVS but the schottky is too big, simply didn't fit to pads and touches neighbour components. The drive will only be plugged to SATA power only from now on but I wonder do I still need to replace the schottky to complete the protection rail?

I didn't even test yet if the TVS alone would work without schottky
Top
 Profile  
 
fzabkar
 Post subject: Re: wd80emzz-11b4fb0 won't even spin after 19v adapter
PostPosted: September 1st, 2025, 10:24 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
I can't see the marking clearly, but if it is "A1", then it could be a regular 1A 100V 1N4001 rectifier. If that's the case then I don't understand its function unless it is to provide reverse polarity protection.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Pandemicc
 Post subject: Re: wd80emzz-11b4fb0 won't even spin after 19v adapter
PostPosted: September 1st, 2025, 10:57 
Offline

Joined: February 2nd, 2023, 19:01
Posts: 90
fzabkar wrote:
I can't see the marking clearly, but if it is "A1", then it could be a regular 1A 100V 1N4001 rectifier. If that's the case then I don't understand its function unless it is to provide reverse polarity protection.

I checked the 5v TVS' and it says "AK" on it I think??? does that make any sense to you? Do they even use the same schottky?
Top
 Profile  
 
fzabkar
 Post subject: Re: wd80emzz-11b4fb0 won't even spin after 19v adapter
PostPosted: September 1st, 2025, 11:03 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
I'm referring to the two small diodes.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Pandemicc
 Post subject: Re: wd80emzz-11b4fb0 won't even spin after 19v adapter
PostPosted: September 1st, 2025, 11:05 
Offline

Joined: February 2nd, 2023, 19:01
Posts: 90
fzabkar wrote:
I'm referring to the two small diodes.

yes me too, the rectifiers. The rectifier near 12v is missing and I'm wondering if it is using the same rectifier that is near the 5v TVS. The rectifier near the 5v says "AK" on it, though Im not entirely sure
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 25 posts ]  Go to page Previous  1, 2

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group