MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
smecca
 Post subject: Wd charger pcb with broken pcb and mcu.
PostPosted: June 16th, 2026, 1:49 
Offline

Joined: March 21st, 2009, 14:53
Posts: 59
Location: Malta
Hi,
A wd charger 2 TB come from customer with fisically broken pcb and MCU :|
Rom is good.
Is data recovery still possible?
Thanks in advance for help and advices
Top
 Profile  
 
Lukas
 Post subject: Re: Wd charger pcb with broken pcb and mcu.
PostPosted: June 16th, 2026, 4:45 
Offline
User avatar

Joined: July 10th, 2022, 15:11
Posts: 130
Location: Poland
What happened to the MCU?
smecca wrote:
Is data recovery still possible?

We don't know, but the easiest way is to check...

_________________
Data recovery Poland (RAID, HDD, SSD) - https://hex-serwis.pl
Top
 Profile  
 
smecca
 Post subject: Re: Wd charger pcb with broken pcb and mcu.
PostPosted: June 16th, 2026, 8:48 
Offline

Joined: March 21st, 2009, 14:53
Posts: 59
Location: Malta
Hi, thank for you reply
Customer tryied a diy usb port repair. Badly badly done. It ended xracking pcb along usb port side, cracking an angle of mcu.


Attachments:
File comment: Mcu part view
20260616_143741.jpg
20260616_143741.jpg [ 127.52 KiB | Viewed 886 times ]
Top
 Profile  
 
Lukas
 Post subject: Re: Wd charger pcb with broken pcb and mcu.
PostPosted: June 16th, 2026, 9:10 
Offline
User avatar

Joined: July 10th, 2022, 15:11
Posts: 130
Location: Poland
The quickest way is to replace it with a compatible PCB and check if the encryption is active.
Are you sure it's a crack?

_________________
Data recovery Poland (RAID, HDD, SSD) - https://hex-serwis.pl
Top
 Profile  
 
smecca
 Post subject: Re: Wd charger pcb with broken pcb and mcu.
PostPosted: June 16th, 2026, 11:14 
Offline

Joined: March 21st, 2009, 14:53
Posts: 59
Location: Malta
Pretty sure. Later i will desolder the die to inspect downside and pads conditions

Already tryied to use alternative compatible pcb (usb 800067) and hdd is ok, spins, ready state, sector edit:encrypted. If it is encrypted via usb i thing noway using full conversion procedure
Top
 Profile  
 
michael chiklis
 Post subject: Re: Wd charger pcb with broken pcb and mcu.
PostPosted: June 16th, 2026, 14:43 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1741
Location: Verona, Italy
Try to contact einstein9, maybe he knows how to crack key on this drive
https://forum.hddguru.com/viewtopic.php?f=13&t=45608

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
pepe
 Post subject: Re: Wd charger pcb with broken pcb and mcu.
PostPosted: June 16th, 2026, 17:17 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4755
Location: Hungary
it was not even mentioned which version it was (no model number, anything). If it is an old model, pcb swap is possible. Let's hear some more info about the drive, pls.

_________________
Adatmentés - Data recovery
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group