MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Sandisk iSSD SDIS6BM-128G
PostPosted: November 27th, 2022, 20:22 
Offline

Joined: November 21st, 2009, 10:38
Posts: 72
Location: Europe
I need to recover data from this chip: Sandisk iSSD SDIS6BM-128G
It come from ASUS Tablet T300 chi.

I thought about trying to read it as a common eMMC but the pinout doesn't seem to match.
Can anyone help me?


Attachments:
20221125_003516.jpg
20221125_003516.jpg [ 103.35 KiB | Viewed 9068 times ]
File comment: PCB
20221128_002834.jpg
20221128_002834.jpg [ 235.94 KiB | Viewed 9068 times ]
20221125_004438.jpg
20221125_004438.jpg [ 426.39 KiB | Viewed 9068 times ]
Top
 Profile  
 
 Post subject: Re: Sandisk iSSD SDIS6BM-128G
PostPosted: November 27th, 2022, 23:09 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17095
Location: Australia
That's a complete SATA SSD on a chip.

Here is an example:

https://www.worthpoint.com/worthopedia/sandisk-24gb-half-msata-ssd-drive-1787396198

https://thumbs.worthpoint.com/zoom/images2/1/1115/17/sandisk-24gb-half-msata-ssd-drive_1_1c2daa154296923cf00a661abbe914b2.jpg
https://thumbs.worthpoint.com/zoom/images1/1/1115/17/sandisk-24gb-half-msata-ssd-drive_1_1c2daa154296923cf00a661abbe914b2.jpg

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Sandisk iSSD SDIS6BM-128G
PostPosted: November 28th, 2022, 5:39 
Offline

Joined: November 21st, 2009, 10:38
Posts: 72
Location: Europe
fzabkar wrote:
That's a complete SATA SSD on a chip.


So how to read without PCB ?


Top
 Profile  
 
 Post subject: Re: Sandisk iSSD SDIS6BM-128G
PostPosted: November 28th, 2022, 12:06 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17095
Location: Australia
Find a complete SSD solution and transfer the chip, eg ...

http://images.mjdic.com/Attachments/product/201601/569489714b97d.jpg

... or repair the tablet.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Sandisk iSSD SDIS6BM-128G
PostPosted: June 15th, 2026, 16:39 
Offline

Joined: April 17th, 2022, 22:39
Posts: 257
Location: Vietnam
i my self also stumbled accross this drive. The SSD boards are so hard to find. There are almost none


Top
 Profile  
 
 Post subject: Re: Sandisk iSSD SDIS6BM-128G
PostPosted: July 30th, 2026, 12:49 
Offline

Joined: April 17th, 2022, 22:39
Posts: 257
Location: Vietnam
I am digging this up. I got my hands on a donor board. that was fully functional and can get into windows

I swapped the SSD
But both the donor and patient SSD now is not recognisable in BIOS


I don't think i killed the SSD. Since i use 360 degrees C to solder and desolder the SSDs
I think i am coming accross somekind of hard lock on the tablet


Attachments:
7 SOLDERING SSD.jpg
7 SOLDERING SSD.jpg [ 444.77 KiB | Viewed 444 times ]
6 BIOS 4.jpg
6 BIOS 4.jpg [ 337.87 KiB | Viewed 444 times ]
5 BIOS 3.jpg
5 BIOS 3.jpg [ 575.49 KiB | Viewed 444 times ]
4 BIOS 1.jpg
4 BIOS 1.jpg [ 550.42 KiB | Viewed 444 times ]
3 PATIENT PCB.jpg
3 PATIENT PCB.jpg [ 1.11 MiB | Viewed 444 times ]
2 DONOR PCB.jpg
2 DONOR PCB.jpg [ 1.13 MiB | Viewed 444 times ]
1 DONOR PCB.jpg
1 DONOR PCB.jpg [ 1.15 MiB | Viewed 444 times ]
Top
 Profile  
 
 Post subject: Re: Sandisk iSSD SDIS6BM-128G
PostPosted: July 30th, 2026, 13:20 
Offline

Joined: April 17th, 2022, 22:39
Posts: 257
Location: Vietnam
I am curious if these pins serve any purpose. Only this SSD have those pins


Attachments:
8.1.jpg
8.1.jpg [ 144.88 KiB | Viewed 428 times ]
Top
 Profile  
 
 Post subject: Re: Sandisk iSSD SDIS6BM-128G
PostPosted: July 30th, 2026, 16:31 
Offline

Joined: November 7th, 2020, 5:31
Posts: 1305
Location: United Kingdom
Size and location would suggest mechanical anchor points and grounding.

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/


Top
 Profile  
 
 Post subject: Re: Sandisk iSSD SDIS6BM-128G
PostPosted: July 31st, 2026, 6:37 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3929
Location: Adelaide, Australia
looks like all on the ground plane, if looking at the PCB. You could probably buzz it out to see if they are all ground. But some datasheets do say similar pads need to be soldered. on your picture of the chip above, you can see that there are traces going to those pins, most look connected together, but the bottom left group at least has the top pin not connected to the others. I wouldn't assume anything just in case. You might be lucky to find a datasheet, or at least of something similar


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group