View topic - slow spins

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

slow spins

Page 1 of 1

[ 4 posts ]

Previous topic | Next topic

Author

Message

sempre

Post subject: slow spins

Posted: March 26th, 2007, 16:05

Joined: October 14th, 2005, 9:26
Posts: 1060

Hi to all!!

hdd toshiba MK6021GAS

THE MOTOR SPINS VERY SLOWLY (30 RPM) AS I DO IN ORDER THAT IT WORKS TO (REVOLVE)

Thanks
:?:

_________________
Нет ничего невозможного

Top

pcimage

Post subject:

Posted: March 27th, 2007, 3:31

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Suggestions:

1. Apply hot air to underneath of spindle.

2. Loosen silver disk underneath and re-apply lubricant to spindle

3. Swap platter to good shell.

Top

sempre

Post subject: THANKS FOR HELP PCIMAGE!! CHECK PM..

Posted: March 27th, 2007, 8:00

Joined: October 14th, 2005, 9:26
Posts: 1060

pcimage wrote:

Suggestions:

1. Apply hot air to underneath of spindle.

2. Loosen silver disk underneath and re-apply lubricant to spindle

3. Swap platter to good shell.

_________________
Нет ничего невозможного

Top

irrision

Post subject:

Posted: March 29th, 2007, 17:05

Joined: July 12th, 2006, 23:37
Posts: 3

What is a technique to remove that spindle bearing cap on the bottom of drives anyways? Do they usually spin out? I've seen people cut a groove into the cap with a dremel which I assume is to use a screwdriver to spin the cap out.

Top

Page 1 of 1

[ 4 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 128 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum