View topic - Requesting loader

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Requesting loader

Page 1 of 1

[ 13 posts ]

Previous topic | Next topic

Author

Message

GIKUYU

Post subject: Requesting loader

Posted: May 28th, 2007, 15:53

Joined: May 28th, 2007, 15:48
Posts: 15
Location: NAIROBI

Hi all,

i kindly would like to reqest a loader for my hard drive

Drive Details

Maxtor

maxline plus II
250GB ATA/133 HDD
MODEL 7Y250P00628R1

my drive is knocking on initialisation and a freind of mine advised me to request for a loader and use it to see if the drive may stop knocking.

once again i will appriciate your assistance

regards

_________________
GEORGE NJOROGE
EAST AFRICAN DATA HANDLERS LTD
http://WWW.datarecovery.co.ke
Chiromo court chiromo road, Westlands
Nairobi Kenya
+254-20-3751400/2/7

Top

pcimage

Post subject:

Posted: May 28th, 2007, 16:04

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

With respect, what are you going to do with the LDR?

Do you have PC3000 to implement it?

If not, you are wasting your time my friend!

Top

GIKUYU

Post subject:

Posted: May 29th, 2007, 2:53

Joined: May 28th, 2007, 15:48
Posts: 15
Location: NAIROBI

Yes i do have PC-3000

_________________
GEORGE NJOROGE
EAST AFRICAN DATA HANDLERS LTD
http://WWW.datarecovery.co.ke
Chiromo court chiromo road, Westlands
Nairobi Kenya
+254-20-3751400/2/7

Top

pcimage

Post subject:

Posted: May 29th, 2007, 5:28

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

OK, what firmware version is it you require?

Check HDDGURU FILES, I've uploaded full f/w and LDR for 7Y250P0 YAR41BW0

Top

GIKUYU

Post subject:

Posted: June 14th, 2007, 9:48

Joined: May 28th, 2007, 15:48
Posts: 15
Location: NAIROBI

hi

how do i load it, am not a guru in pc-3000 and i wouldnt mind some assistance.

_________________
GEORGE NJOROGE
EAST AFRICAN DATA HANDLERS LTD
http://WWW.datarecovery.co.ke
Chiromo court chiromo road, Westlands
Nairobi Kenya
+254-20-3751400/2/7

Top

Starling

Post subject:

Posted: June 14th, 2007, 10:03

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada

Section 4 of PC3000 Maxtor manual contains lots of information about Maxtor firmware. :wink:

Top

pcimage

Post subject:

Posted: June 14th, 2007, 15:36

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Set drive to Safe Mode.

Enter utility.

Load LDR

Top

dinazorSince79

Post subject:

Posted: June 22nd, 2007, 13:47

Joined: April 14th, 2007, 15:09
Posts: 3
Location: Turkey

pcimage wrote:

OK, what firmware version is it you require?

Check HDDGURU FILES, I've uploaded full f/w and LDR for 7Y250P0 YAR41BW0

I'm also pc-3000 user. Can you help me to find a loader for below drive?
Mxtor
Diamondmax plus8
NAR61590
6e030l0510613

Thanks in advance

Top

pepe

Post subject:

Posted: June 22nd, 2007, 13:56

Joined: October 3rd, 2005, 0:40
Posts: 4755
Location: Hungary

Hi guys,

if U have original PC3k, U should have a good bunch of ldrs for these not-very-hard-to-find drives... I think...
pepe

Top

dinazorSince79

Post subject:

Posted: June 22nd, 2007, 15:16

Joined: April 14th, 2007, 15:09
Posts: 3
Location: Turkey

pepe wrote:

Hi guys,

if U have original PC3k, U should have a good bunch of ldrs for these not-very-hard-to-find drives... I think...
pepe

I reinstalled the application yesterday. I lost all the data base, now it is not free although i'm a pc-3000 user. If you can send me, it will be so nice. If not, it is ok , np.
Regards

Top

Dmitry Postrigan

Post subject:

Posted: June 25th, 2007, 5:17

Joined: September 27th, 2005, 8:21
Posts: 765

Have you tried looking here? http://files.hddguru.com/index_en.html

Top

dinazorSince79

Post subject:

Posted: June 25th, 2007, 6:28

Joined: April 14th, 2007, 15:09
Posts: 3
Location: Turkey

maysoft wrote:

Have you tried looking here? http://files.hddguru.com/index_en.html

I couldn't find it there.

Thank you

Top

Starling

Post subject:

Posted: June 25th, 2007, 10:52

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada

dinazorSince79 wrote:

I reinstalled the application yesterday. I lost all the data base, now it is not free although i'm a pc-3000 user.

Since when?
Did you check your update box on acelab website?
You should also have your database on CD shipped with PC3000.

Top

Page 1 of 1

[ 13 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 84 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum