Does anyone know where get a screw driver for this screw on Toshiba 1.8" GAH

its draw like a STAR
Thanks

i once tried to get from wiha.com but they hassled me too much by asking me to write a letter confirming what i will do with it, because its a security torx plus bit. Having done that they told me they cannot export this product outside US. What a dick head!

Finally i made my own from normal torx bit.

They are normally included in sets to work on mobile phones.
I ordered one from Germany via Ebay.

Regards,

Dobre

Last time I opened one of these, I used a T5.

If you're careful and push down quite hard while turning slowly, they will come undone.

Sean

i cant get the tool for this kind of screw but thanks God and your comments i be able to adapt one of mine for open it this 1.8" HDD , then inside a Head Sticktion after do the need it task´s !! Get all Data



Thanks a lot of to all people on hddguru GOD bless u

Sinceraly

Alberto

Yep, Alberto.

I had stiction too.

99% fixed with my method!!

You have PM

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Can get the torx star security bits in Amazon too & the mob phone kits, pretty cheap depending on make and size.

Eg: http://www.amazon.co.uk/Draper-38716-33 ... 325&sr=8-1

S

_________________
It's always somethin, and if it ain't somethin, it's somethin else - Cptn. Paul Watson.

I bought this from ebay

http://www.ebay.co.uk/itm/5-Point-Penta ... 2c5e1e0146