MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
  Previous topic | Next topic 
Author Message
chipsang
 Post subject: Seagate 7200.7 report
PostPosted: July 17th, 2007, 7:38 
Offline

Joined: June 5th, 2006, 1:09
Posts: 93
Location: INDIA
Hi I get following terminal report for seagate 160 GB 7200.7 Pata hard disk model ST3160023A F/w 3.06
Kindly let me know what these messages means and how i should go ahead with data recovery? Are heads of this hdd are damaged?
Thank you
Kiran





Interface task reset
4096k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51

Buzz - Head Mask 000F - Switch to full int.
Spin Ready
3.06 01-29-04 11:20
(P)PATA Reset

Interface task reset
4096k x 16 buffer detected

F>
F>














Switching HDD power supply OFF
Selected family......................... : Barracuda 7200.7
Selected model.......................... : ST3160023A
Model by ID............................. : <HDD ID NOT READ>
Detection of HDD COM port baud rate..... : Error
Terminal : reply timeout error

Error switching COM port baud rate
Error switching COM port baud rate
Error switching COM port baud rate

Initializing Safe Mode...

Switching HDD power supply OFF

Switching HDD power supply ON

COM transfer baud rate set to 19200

Terminal : detecting SA bounds...
Detection of SA bounds by MUX
SA bounds identified


Test : Reading SA surface by PCHS (terminal)
Location (PCHS).......... : 0xE31B : 0x0 : 0x0
Number................... : 0x180
HDD profile file......... : D:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SeagateBara\Barracuda 7200.7\new shi\Data\PCHS 0x00E31B_0x00_0x0000(0x0180).chs
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error
Result.................................. : Error




Test : Saving LDR from HDD
HDD profile file......... : D:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SeagateBara\Barracuda 7200.7\new shi\Data\LDR\SgLDR.ldr
Will be stored........... : ROM, App, CERT code, CERT tables, Ovl 0, Stuff, DRV cfg

DRV cfg reading...
DRV cfg reading......................... : This action is impossible in Safe mode!

Result.................................. : Error


Executing user command.................. : Show ROM information

Executing user command.................. : Show PCB information

Executing user command.................. : Show User track slip list (P-List)


Test : ROM reading (terminal)
ROM file type............ : Programmer image
HDD profile file......... : D:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SeagateBara\Barracuda 7200.7\new shi\Data\ROM\ROM.bin

Initializing Safe Mode...

Switching HDD power supply OFF

Switching HDD power supply ON
Result.................................. : Error

Error connecting to Serial Flash!
Error : Terminal : reply timeout error
HDD reply :


Test : Reading SA surface by PCHS (terminal)
Location (PCHS).......... : 0x0 : 0x0 : 0x0
Number................... : 0x0
Result.................................. : Ok



Test : Reading SA surface by PCHS (terminal)
Location (PCHS).......... : 0x0 : 0x0 : 0x0
Number................... : 0x0
Result.................................. : Ok


Terminal : detecting SA bounds...
Detection of SA bounds by MUX
SA bounds identified


Test : Reading SA surface by PCHS (terminal)
Location (PCHS).......... : 0xE31B : 0x0 : 0x0
Number................... : 0x180
Terminal : reply timeout error
Terminal : reply timeout error
Terminal : reply timeout error

Terminal : reply timeout error
Terminal : reply timeout error
Result.................................. : Error
Top
 Profile  
 
beto
 Post subject: Re: Seagate 7200.7 report
PostPosted: July 17th, 2007, 10:32 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico
you hard disk its knocking? its showing BSY , or get DRDY DSC?
Top
 Profile  
 
chipsang
 Post subject: Re: Seagate 7200.7 report
PostPosted: July 18th, 2007, 1:52 
Offline

Joined: June 5th, 2006, 1:09
Posts: 93
Location: INDIA
beto wrote:
you hard disk its knocking? its showing BSY , or get DRDY DSC?



Hi thanks BETO No its not knocking and neither showing busy or any other status.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 59 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group