MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: Firmware Need For WD400BD-75LRA0
PostPosted: October 24th, 2007, 17:33 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
I have a Western Digital Drive

WD400BD-75LRA0
DCM= HSBHYTJCH
SN= WMAMC5060128

Drive is detecting as a WDC ROM MODEL UNICORN does anyone have the firmware or have worked on this drive before?

Thank you.


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: October 25th, 2007, 13:23 
Offline

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada
Does it click?
Does it spin up?
Did you change PCB on it?


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: October 26th, 2007, 0:07 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
It Spins no clickiing havnt found a matching PCB but after seeing the way the drive detected as a WDC ROM Unicorn it seemed like firmware.


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: October 26th, 2007, 2:32 
Offline

Joined: May 30th, 2005, 17:07
Posts: 542
Hi,
It is nacessary to resolder native ROM !!!

Mikippp


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: October 27th, 2007, 4:39 
Offline

Joined: May 30th, 2005, 17:07
Posts: 542
Hi,
ROM - U12 (25P10, AT25F1024, SST25VF010)

Mikippp


Attachments:
ROM.jpg
ROM.jpg [ 71.4 KiB | Viewed 14082 times ]
Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: October 28th, 2007, 13:46 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
Thank you for your comments.


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 16th, 2007, 16:26 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
Is this the only way to resolder this chip or is there any firmware for this drive?


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 16th, 2007, 19:32 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
The PCB is burnt? The Drive is just detecting as a unicorn.


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 16th, 2007, 23:36 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
Yes that is what I mean seems like bad firmware & I do Have PC3K PCI anyone have the firmware?


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 19th, 2007, 2:00 
Offline

Joined: November 19th, 2007, 0:23
Posts: 84
Do you know the F/W version and Link version you need?


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 19th, 2007, 10:25 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
Firmware REV A00 For PC-3000PCI


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 20th, 2007, 22:45 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
Looks like the translator module is corrupt. Module 31 and 32.


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 21st, 2007, 9:08 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
This was the generated Report

-------------------------------------------------------------------------------------------------------------------------------
Id:Copy: Importance:Cyl :Head:Sector:Size:Read : Hdr : CS : CS Value: Date : Vers.: Desription
-------------------------------------------------------------------------------------------------------------------------------
01: 0 : As : -1: 0: 0: 2:Yes : Ok : Ok : 6D :29-06-05:06BB? :Modules directory
01: 1 : As : -33: 0: 0: 2:Yes : Ok : Ok : 6D :29-06-05:06BB? :Modules directory
31: 0 : Ad : -1: 0: 6: 176:Yes : Ok : Ok : 36 :20-08-49:1500? :Translator
31: 1 : Ad : -33: 0: 6: 176:Yes : Ok : Ok : 36 :20-08-49:1500? :Translator
17: 0 : B : -1: 0: 192: 30:Yes : Ok : Ok : 62 :26-05-05:06BBD :Loaded part of microprogram code
17: 1 : B : -33: 0: 192: 30:Yes : Ok : Ok : 62 :26-05-05:06BBD :Loaded part of microprogram code
15: 0 : B : -1: 0: 232: 13:Yes : Ok : Ok : A5 :26-05-05:06BBD :Loaded part of microprogram code
15: 1 : B : -33: 0: 232: 13:Yes : Ok : Ok : A5 :26-05-05:06BBD :Loaded part of microprogram code
04: 0 : B : -1: 0: 255: 9:Yes : Ok : Ok : 0D :26-05-05:0200? :Family models configuration (Main)
04: 1 : B : -33: 0: 255: 9:Yes : Ok : Ok : 0D :26-05-05:0200? :Family models configuration (Main)
4A: 0 : As : -1: 0: 268: 4:Yes : Ok : Ok : 08 :26-05-05:06BB? :Adaptive data
4A: 1 : As : -33: 0: 268: 4:Yes : Ok : Ok : 08 :26-05-05:06BB? :Adaptive data
52: 0 : As : -1: 0: 276: 2:Yes : Ok : Ok : 5D :26-05-05:06BB? :Parameters table 3
52: 1 : As : -33: 0: 276: 2:Yes : Ok : Ok : 5D :26-05-05:06BB? :Parameters table 3
35: 0 : : -2: 0: 0: 1:Yes : Ok : Ok : AC :13-10-02:6000? :
35: 1 : : -34: 0: 0: 1:Yes : Ok : Ok : AC :13-10-02:6000? :
02: 0 : B : -2: 0: 5: 2:Yes : Ok : Ok : 88 :26-05-05:0800? :Configuration (HDD ID)
02: 1 : B : -34: 0: 5: 2:Yes : Ok : Ok : 88 :26-05-05:0800? :Configuration (HDD ID)
33: 0 : Dd : -2: 0: 11: 290:Yes : Ok : Ok : 5A :26-05-05:1500? :P-List (Primary defect list)
33: 1 : Dd : -34: 0: 11: 290:Yes : Ok : Ok : 5A :26-05-05:1500? :P-List (Primary defect list)
26: 0 : : -2: 0: 305: 129:Yes : Ok : Ok : 0C :26-05-05:06BB? :
26: 1 : : -34: 0: 305: 129:Yes : Ok : Ok : 0C :26-05-05:06BB? :
1C: 0 : B : -2: 0: 438: 27:Yes : Ok : Ok : D6 :26-05-05:06BBD :Loaded part of microprogram code
1C: 1 : B : -34: 0: 438: 27:Yes : Ok : Ok : D6 :26-05-05:06BBD :Loaded part of microprogram code
4C: 0 : B : -2: 0: 475: 13:Yes : Ok : Ok : 8A :26-05-05:06BBD :Loaded part of microprogram code
4C: 1 : B : -34: 0: 475: 13:Yes : Ok : Ok : 8A :26-05-05:06BBD :Loaded part of microprogram code
07: 0 : B : -2: 0: 498: 9:Yes : Ok : Ok : CE :26-05-05:0200? :Family models configuration (Alt3)
07: 1 : B : -34: 0: 498: 9:Yes : Ok : Ok : CE :26-05-05:0200? :Family models configuration (Alt3)
53: 0 : As : -2: 0: 511: 2:Yes : Ok : Ok : BE :26-05-05:06BB? :Parameters table 4
53: 1 : As : -34: 0: 511: 2:Yes : Ok : Ok : BE :26-05-05:06BB? :Parameters table 4
2E: 0 : : -3: 0: 0: 284:Yes : Ok : Ok : 68 :26-05-05:06BB? :
2E: 1 : : -35: 0: 0: 284:Yes : Ok : Ok : 68 :26-05-05:06BB? :
1B: 0 : B : -3: 0: 294: 93:Yes : Ok : Ok : A4 :26-05-05:06BBD :Loaded part of microprogram code
1B: 1 : B : -35: 0: 294: 93:Yes : Ok : Ok : A4 :26-05-05:06BBD :Loaded part of microprogram code
19: 0 : B : -3: 0: 397: 25:Yes : Ok : Ok : BF :26-05-05:06BBD :Loaded part of microprogram code
19: 1 : B : -35: 0: 397: 25:Yes : Ok : Ok : BF :26-05-05:06BBD :Loaded part of microprogram code
41: 0 : As : -3: 0: 432: 19:Yes : Ok : Ok : 04 :26-05-05:06BB? :Adaptive data
41: 1 : As : -35: 0: 432: 19:Yes : Ok : Ok : 04 :26-05-05:06BB? :Adaptive data
05: 0 : B : -3: 0: 455: 9:Yes : Ok : Ok : AB :26-05-05:0200? :Family models configuration (Alt1)
05: 1 : B : -35: 0: 455: 9:Yes : Ok : Ok : AB :26-05-05:0200? :Family models configuration (Alt1)
0C: 0 : B : -3: 0: 468: 3:Yes : Ok : Ok : 26 :26-05-05:0100? :Models table
0C: 1 : B : -35: 0: 468: 3:Yes : Ok : Ok : 26 :26-05-05:0100? :Models table
37: 0 : : -3: 0: 475: 1:Yes : Ok : Ok : E4 :26-05-05:0100? :
37: 1 : : -35: 0: 475: 1:Yes : Ok : Ok : E4 :26-05-05:0100? :
2D: 0 : : -8: 0: 0: 284:Yes : Ok : Ok : 69 :26-05-05:06BB? :
2D: 1 : : -40: 0: 0: 284:Yes : Ok : Ok : 69 :26-05-05:06BB? :
21: 0 : B : -8: 0: 294: 62:Yes : Ok : Ok : 8D :26-05-05:2106? :S.M.A.R.T.
21: 1 : B : -40: 0: 294: 62:Yes : Ok : Ok : 8D :26-05-05:2106? :S.M.A.R.T.
1E: 0 : B : -8: 0: 360: 23:Yes : Ok : Ok : F9 :26-05-05:06BBD :Loaded part of microprogram code
1E: 1 : B : -40: 0: 360: 23:Yes : Ok : Ok : F9 :26-05-05:06BBD :Loaded part of microprogram code
40: 0 : As : -8: 0: 393: 19:Yes : Ok : Ok : E7 :26-05-05:06BB? :Adaptive data
40: 1 : As : -40: 0: 393: 19:Yes : Ok : Ok : E7 :26-05-05:06BB? :Adaptive data
32: 0 : Ad : -8: 0: 416: 8:No : : : : : :Translator
32: 1 : Ad : -40: 0: 416: 8:No : : : : : :Translator
36: 0 : : -8: 0: 428: 2:Yes : Ok : Ok : 6F :26-05-05:06BB? :
36: 1 : : -40: 0: 428: 2:Yes : Ok : Ok : 6F :26-05-05:06BB? :
11: 0 : B : -9: 0: 0: 252:Yes : Ok : Ok : F3 :26-05-05:06BBD :Loaded part of microprogram code
11: 1 : B : -41: 0: 0: 252:Yes : Ok : Ok : F3 :26-05-05:06BBD :Loaded part of microprogram code
23: 0 : B : -9: 0: 262: 62:Yes : Ok : Ok : 01 :26-05-05:2106? :S.M.A.R.T. Log (reserved)
23: 1 : B : -41: 0: 262: 62:Yes : Ok : Ok : 01 :26-05-05:2106? :S.M.A.R.T. Log (reserved)
43: 0 : As : -9: 0: 328: 19:Yes : Ok : Ok : 16 :26-05-05:06BB? :Adaptive data
43: 1 : As : -41: 0: 328: 19:Yes : Ok : Ok : 16 :26-05-05:06BB? :Adaptive data
39: 0 : : -9: 0: 351: 17:Yes : Ok : Ok : 69 :26-05-05:06BB? :
39: 1 : : -41: 0: 351: 17:Yes : Ok : Ok : 69 :26-05-05:06BB? :
2F: 0 : B : -9: 0: 372: 5:Yes : Ok : Ok : 61 :26-05-05:06BBD :Loaded part of microprogram code
2F: 1 : B : -41: 0: 372: 5:Yes : Ok : Ok : 61 :26-05-05:06BBD :Loaded part of microprogram code
49: 0 : As : -9: 0: 381: 2:Yes : Ok : Ok : 9D :26-05-05:06BB? :Adaptive data
49: 1 : As : -41: 0: 381: 2:Yes : Ok : Ok : 9D :26-05-05:06BB? :Adaptive data
38: 0 : : -10: 0: 0: 257:Yes : Ok : Ok : D2 :26-05-05:06BB? :
38: 1 : : -42: 0: 0: 257:Yes : Ok : Ok : D2 :26-05-05:06BB? :
22: 0 : B : -10: 0: 261: 62:Yes : Ok : Ok : 8B :26-05-05:2106? :S.M.A.R.T.
22: 1 : B : -42: 0: 261: 62:Yes : Ok : Ok : 8B :26-05-05:2106? :S.M.A.R.T.
28: 0 : : -10: 0: 327: 19:Yes : Ok : Ok : 4F :28-06-05:0300? :
28: 1 : : -42: 0: 327: 19:Yes : Ok : Ok : 4F :28-06-05:0300? :
34: 0 : C : -10: 0: 350: 12:Yes : Ok : Ok : 97 :26-05-05:1500? :G-List (Grown defect list)
34: 1 : C : -42: 0: 350: 12:Yes : Ok : Ok : 97 :26-05-05:1500? :G-List (Grown defect list)
29: 0 : : -10: 0: 366: 5:Yes : Ok : Ok : 26 :26-05-05:06BB? :
29: 1 : : -42: 0: 366: 5:Yes : Ok : Ok : 26 :26-05-05:06BB? :
50: 0 : As : -10: 0: 375: 2:Yes : Ok : Ok : F0 :26-05-05:06BB? :Parameters table 1
50: 1 : As : -42: 0: 375: 2:Yes : Ok : Ok : F0 :26-05-05:06BB? :Parameters table 1
25: 0 : : -11: 0: 0: 257:Yes : Ok : Ok : 8C :26-05-05:06BB? :
25: 1 : : -43: 0: 0: 257:Yes : Ok : Ok : 8C :26-05-05:06BB? :
24: 0 : B : -11: 0: 261: 62:Yes : Ok : Ok : 31 :26-05-05:2106? :S.M.A.R.T. Log (reserved)
24: 1 : B : -43: 0: 261: 62:Yes : Ok : Ok : 31 :26-05-05:2106? :S.M.A.R.T. Log (reserved)
42: 0 : As : -11: 0: 327: 19:Yes : Ok : Ok : 3F :26-05-05:06BB? :Adaptive data
42: 1 : As : -43: 0: 327: 19:Yes : Ok : Ok : 3F :26-05-05:06BB? :Adaptive data
06: 0 : B : -11: 0: 350: 10:Yes : Ok : Ok : ED :26-05-05:0200? :Family models configuration (Alt2)
06: 1 : B : -43: 0: 350: 10:Yes : Ok : Ok : ED :26-05-05:0200? :Family models configuration (Alt2)
2A: 0 : : -11: 0: 364: 5:Yes : Ok : Ok : EF :26-05-05:06BB? :
2A: 1 : : -43: 0: 364: 5:Yes : Ok : Ok : EF :26-05-05:06BB? :
51: 0 : As : -11: 0: 373: 2:Yes : Ok : Ok : B5 :26-05-05:06BB? :Parameters table 2
51: 1 : As : -43: 0: 373: 2:Yes : Ok : Ok : B5 :26-05-05:06BB? :Parameters table 2
C4: 0 : Dr : -9: 0: 387: 103:Yes : Ok : Ok : 2D :26-05-05:R.9C? :Calibrations module
C4: 1 : Dr : -41: 0: 387: 103:Yes : Ok : Ok : 2D :26-05-05:R.9C? :Calibrations module
C5: 0 : Dr : -3: 0: 480: 3:Yes : Ok : Ok : 07 :26-05-05:R.01? :Calibration script (DCM)
C5: 1 : Dr : -35: 0: 480: 3:Yes : Ok : Ok : 07 :26-05-05:R.01? :Calibration script (DCM)
CC: 0 : Dr : -3: 0: 483: 6:Yes : Ok : Ok : B1 :26-05-05:R.9C? :Calibrations module
CC: 1 : Dr : -35: 0: 483: 6:Yes : Ok : Ok : B1 :26-05-05:R.9C? :Calibrations module
CA: 0 : Dr : -3: 0: 489: 6:Yes : Ok : Ok : 9D :26-05-05:R.9C? :Calibrations module
CA: 1 : Dr : -35: 0: 489: 6:Yes : Ok : Ok : 9D :26-05-05:R.9C? :Calibrations module
CB: 0 : Dr : -3: 0: 495: 6:Yes : Ok : Ok : 41 :26-05-05:R.9C? :Calibrations module
CB: 1 : Dr : -35: 0: 495: 6:Yes : Ok : Ok : 41 :26-05-05:R.9C? :Calibrations module
CD: 0 : Dr : -3: 0: 501: 6:Yes : Ok : Ok : 61 :26-05-05:R.9C? :Calibrations module
CD: 1 : Dr : -35: 0: 501: 6:Yes : Ok : Ok : 61 :26-05-05:R.9C? :Calibrations module
CF: 0 : Dr : -3: 0: 507: 6:Yes : Ok : Ok : CC :26-05-05:R.9C? :Calibrations module
CF: 1 : Dr : -35: 0: 507: 6:Yes : Ok : Ok : CC :26-05-05:R.9C? :Calibrations module
CE: 0 : Dr : -8: 0: 434: 6:Yes : Ok : Ok : C4 :26-05-05:R.9C? :Calibrations module
CE: 1 : Dr : -40: 0: 434: 6:Yes : Ok : Ok : C4 :26-05-05:R.9C? :Calibrations module
91: 0 : Dr : -3: 0: 513: 1:Yes : Ok : Ok : 0F :26-05-05:R.9C? :Calibrations module
91: 1 : Dr : -35: 0: 513: 1:Yes : Ok : Ok : 0F :26-05-05:R.9C? :Calibrations module
92: 0 : Dr : -3: 0: 514: 1:Yes : Ok : Ok : 0E :26-05-05:R.9C? :Calibrations module
92: 1 : Dr : -35: 0: 514: 1:Yes : Ok : Ok : 0E :26-05-05:R.9C? :Calibrations module
93: 0 : Dr : -8: 0: 440: 6:Yes : Ok : Ok : 08 :26-05-05:R.9C? :Calibrations module
93: 1 : Dr : -40: 0: 440: 6:Yes : Ok : Ok : 08 :26-05-05:R.9C? :Calibrations module
C1: 0 : Dr : -3: 0: 515: 1:Yes : Ok : Ok : AF :26-05-05:R.9C? :Calibrations module
C1: 1 : Dr : -35: 0: 515: 1:Yes : Ok : Ok : AF :26-05-05:R.9C? :Calibrations module
C2: 0 : Dr : -8: 0: 446: 2:Yes : Ok : Ok : DE :26-05-05:R.9C? :Calibrations module
C2: 1 : Dr : -40: 0: 446: 2:Yes : Ok : Ok : DE :26-05-05:R.9C? :Calibrations module
C7: 0 : Dr : -3: 0: 516: 1:Yes : Ok : Ok : D9 :26-05-05:R.9C? :Calibrations module
C7: 1 : Dr : -35: 0: 516: 1:Yes : Ok : Ok : D9 :26-05-05:R.9C? :Calibrations module
9E: 0 : Dr : -8: 0: 448: 3:Yes : Ok : Ok : 00 :26-05-05:R.9C? :Calibrations module
9E: 1 : Dr : -40: 0: 448: 3:Yes : Ok : Ok : 00 :26-05-05:R.9C? :Calibrations module
B1: 0 : : -8: 0: 451: 5:Yes : Ok : Ok : 36 :26-05-05:0112? :
B1: 1 : : -40: 0: 451: 5:Yes : Ok : Ok : 36 :26-05-05:0112? :
E0: 0 : Dr : -6: 0: 0: 510:Yes : Ok : Ok : 76 :26-05-05:620C? :Selfscan module
E0: 1 : Dr : -38: 0: 0: 510:Yes : Ok : Ok : 76 :26-05-05:620C? :Selfscan module
E8: 0 : Dr : -7: 0: 0: 429:Yes : Ok : Ok : 6D :26-05-05:620C? :Selfscan module
E8: 1 : Dr : -39: 0: 0: 429:Yes : Ok : Ok : 6D :26-05-05:620C? :Selfscan module
FE: 0 : Dr : -10: 0: 381: 128:Yes : Ok : Ok : 43 :26-05-05:620C? :Selfscan module
FE: 1 : Dr : -42: 0: 381: 128:Yes : Ok : Ok : 43 :26-05-05:620C? :Selfscan module
D5: 0 : Dr : -11: 0: 379: 110:Yes : Ok : Ok : E7 :26-05-05:620C? :Selfscan module
D5: 1 : Dr : -43: 0: 379: 110:Yes : Ok : Ok : E7 :26-05-05:620C? :Selfscan module
DA: 0 : Dr : -12: 0: 0: 99:Yes : Ok : Ok : 15 :26-05-05:620C? :Selfscan module
DA: 1 : Dr : -44: 0: 0: 99:Yes : Ok : Ok : 15 :26-05-05:620C? :Selfscan module
DB: 0 : Dr : -12: 0: 99: 96:Yes : Ok : Ok : 13 :26-05-05:620C? :Selfscan module
DB: 1 : Dr : -44: 0: 99: 96:Yes : Ok : Ok : 13 :26-05-05:620C? :Selfscan module
DF: 0 : Dr : -12: 0: 195: 110:Yes : Ok : Ok : 35 :26-05-05:620C? :Selfscan module
DF: 1 : Dr : -44: 0: 195: 110:Yes : Ok : Ok : 35 :26-05-05:620C? :Selfscan module
DD: 0 : Dr : -12: 0: 305: 89:Yes : Ok : Ok : 9D :26-05-05:620C? :Selfscan module
DD: 1 : Dr : -44: 0: 305: 89:Yes : Ok : Ok : 9D :26-05-05:620C? :Selfscan module
D6: 0 : Dr : -12: 0: 394: 93:Yes : Ok : Ok : 8A :26-05-05:620C? :Selfscan module
D6: 1 : Dr : -44: 0: 394: 93:Yes : Ok : Ok : 8A :26-05-05:620C? :Selfscan module
D7: 0 : Dr : -13: 0: 0: 91:Yes : Ok : Ok : 3C :26-05-05:620C? :Selfscan module
D7: 1 : Dr : -45: 0: 0: 91:Yes : Ok : Ok : 3C :26-05-05:620C? :Selfscan module
D2: 0 : Dr : -13: 0: 91: 86:Yes : Ok : Ok : 44 :26-05-05:620C? :Selfscan module
D2: 1 : Dr : -45: 0: 91: 86:Yes : Ok : Ok : 44 :26-05-05:620C? :Selfscan module
BB: 0 : Dr : -7: 0: 429: 76:Yes : Ok : Ok : 5B :26-05-05:620C? :Selfscan module
BB: 1 : Dr : -39: 0: 429: 76:Yes : Ok : Ok : 5B :26-05-05:620C? :Selfscan module
D9: 0 : Dr : -13: 0: 177: 77:Yes : Ok : Ok : 1F :26-05-05:620C? :Selfscan module
D9: 1 : Dr : -45: 0: 177: 77:Yes : Ok : Ok : 1F :26-05-05:620C? :Selfscan module
D4: 0 : Dr : -13: 0: 254: 72:Yes : Ok : Ok : 47 :26-05-05:620C? :Selfscan module
D4: 1 : Dr : -45: 0: 254: 72:Yes : Ok : Ok : 47 :26-05-05:620C? :Selfscan module
DC: 0 : Dr : -13: 0: 326: 72:Yes : Ok : Ok : 86 :26-05-05:620C? :Selfscan module
DC: 1 : Dr : -45: 0: 326: 72:Yes : Ok : Ok : 86 :26-05-05:620C? :Selfscan module
D0: 0 : Dr : -13: 0: 398: 71:Yes : Ok : Ok : 19 :26-05-05:620C? :Selfscan module
D0: 1 : Dr : -45: 0: 398: 71:Yes : Ok : Ok : 19 :26-05-05:620C? :Selfscan module
D3: 0 : Dr : -14: 0: 0: 71:Yes : Ok : Ok : 3D :26-05-05:620C? :Selfscan module
D3: 1 : Dr : -46: 0: 0: 71:Yes : Ok : Ok : 3D :26-05-05:620C? :Selfscan module
BA: 0 : Dr : -14: 0: 71: 82:Yes : Ok : Ok : 93 :26-05-05:620C? :Selfscan module
BA: 1 : Dr : -46: 0: 71: 82:Yes : Ok : Ok : 93 :26-05-05:620C? :Selfscan module
B9: 0 : Dr : -14: 0: 153: 69:Yes : Ok : Ok : 41 :26-05-05:620C? :Selfscan module
B9: 1 : Dr : -46: 0: 153: 69:Yes : Ok : Ok : 41 :26-05-05:620C? :Selfscan module
BC: 0 : Dr : -14: 0: 222: 70:Yes : Ok : Ok : 38 :26-05-05:620C? :Selfscan module
BC: 1 : Dr : -46: 0: 222: 70:Yes : Ok : Ok : 38 :26-05-05:620C? :Selfscan module
FD: 0 : Dr : -14: 0: 292: 64:Yes : Ok : Ok : 05 :26-05-05:620C? :Selfscan module
FD: 1 : Dr : -46: 0: 292: 64:Yes : Ok : Ok : 05 :26-05-05:620C? :Selfscan module
FB: 0 : Dr : -8: 0: 456: 32:Yes : Ok : Ok : 6C :/WRONG/ :620C? :Selfscan module
FB: 1 : Dr : -40: 0: 456: 32:Yes : Ok : Ok : 6C :/WRONG/ :620C? :Selfscan module
E6: 0 : Dr : -13: 0: 469: 32:Yes : Ok : Ok : D0 :26-05-05:620C? :Selfscan module
E6: 1 : Dr : -45: 0: 469: 32:Yes : Ok : Ok : D0 :26-05-05:620C? :Selfscan module
E7: 0 : Dr : -14: 0: 356: 32:Yes : Ok : Ok : EE :28-06-05:620C? :Selfscan module
E7: 1 : Dr : -46: 0: 356: 32:Yes : Ok : Ok : EE :28-06-05:620C? :Selfscan module
BE: 0 : Dr : -8: 0: 488: 21:Yes : Ok : Ok : 8F :26-05-05:620C? :Selfscan module
BE: 1 : Dr : -40: 0: 488: 21:Yes : Ok : Ok : 8F :26-05-05:620C? :Selfscan module
B8: 0 : Dr : -9: 0: 490: 8:Yes : Ok : Ok : 99 :28-06-05:620C? :Selfscan module
B8: 1 : Dr : -41: 0: 490: 8:Yes : Ok : Ok : 99 :28-06-05:620C? :Selfscan module
BF: 0 : Dr : -9: 0: 498: 8:Yes : Ok : Ok : E0 :26-05-05:620C? :Selfscan module
BF: 1 : Dr : -41: 0: 498: 8:Yes : Ok : Ok : E0 :26-05-05:620C? :Selfscan module
FC: 0 : Dr : -7: 0: 505: 4:Yes : Ok : Ok : BA :26-05-05:620C? :Selfscan module
FC: 1 : Dr : -39: 0: 505: 4:Yes : Ok : Ok : BA :26-05-05:620C? :Selfscan module
EE: 0 : Dr : -9: 0: 506: 4:Yes : Ok : Ok : 3E :26-05-05:620C? :Selfscan module
EE: 1 : Dr : -41: 0: 506: 4:Yes : Ok : Ok : 3E :26-05-05:620C? :Selfscan module
E1: 0 : Dr : -33: 0: 0: 510:Yes :Error: Ok : 6D :29-06-05:06BB? :Selfscan module
E1: 1 : Dr : -65: 0: 0: 510:No : : : : : :Selfscan module
E2: 0 : Dr : -34: 0: 0: 510:Yes :Error: Ok : AC :13-10-02:6000? :Selfscan module
E2: 1 : Dr : -66: 0: 0: 510:No : : : : : :Selfscan module
E3: 0 : Dr : -35: 0: 0: 510:Yes :Error: Ok : 68 :26-05-05:06BB? :Selfscan module
E3: 1 : Dr : -67: 0: 0: 510:No : : : : : :Selfscan module
E4: 0 : Dr : -36: 0: 0: 510:Yes :Error:Error: 55/EA :28-06-05:..... :Selfscan module
E4: 1 : Dr : -68: 0: 0: 510:No : : : : : :Selfscan module
E5: 0 : Dr : -37: 0: 0: 510:Yes :Error:Error: B7/28 :26-05-05:R.9C. :Selfscan module
E5: 1 : Dr : -69: 0: 0: 510:No : : : : : :Selfscan module
E9: 0 : Dr : -38: 0: 0: 429:Yes :Error: Ok : 76 :26-05-05:620C? :Selfscan module
E9: 1 : Dr : -70: 0: 0: 429:No : : : : : :Selfscan module
-------------------------------------------------------------------------------------------------------------------------------

CONFIGURATION MODULE (02)
SA Copy num Location State
---------------------------------------------------
0 c: -2 H: 0 Ok
1 c:-34 H: 0 Ok

HDD Identify
Model................................... : WDC WD400BD-75LRA0
Serial number........................... : WD-WMAMC5060128
Master-password
Set..................................... : No
User-password
Set..................................... : No

Security level.......................... : High


Log DCM (C5)
SA Copy num Location State
---------------------------------------------------
0 c: -3 H: 0 Ok
1 c:-35 H: 0 Ok

offset head)| | HE 44
WAY : 8, D (0 offset head)| | WDB
: 0, 7, F, Y (0 offset head)| | WDB-
HBMT: M, N, P ZR89: U (0 offset head)| +-----
--------------------------------------------+ 


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 21st, 2007, 10:06 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
Correct Felix. There are two options to solve this:

1 Regenerate translator if the modules can be rewritten; if this fails you can first try to write all 0's to the location of these modules and retry.
2 Hotswap

1 can be risky, 2 should not be a problem

Best regards,

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 21st, 2007, 10:42 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
Thank you, but rewritting the translator wouldnt this erase the customers data as well?


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 21st, 2007, 11:27 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
In normal conditions not, since you base yourself on the plist in the drive; but safer is to copy the neccessary modules to another drive, regenerate the translator there and then do hotswap. Then there is no risk.


Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu


Top
 Profile  
 
 Post subject: Re: Firmware Need For WD400BD-75LRA0
PostPosted: November 21st, 2007, 11:38 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
Ok thank you I will try this.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 54 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group