View topic - WD2000JB bad firmware area

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

WD2000JB bad firmware area

Page 1 of 1

[ 4 posts ]

Previous topic | Next topic

Author

Message

Archive_Me!

Post subject:

Posted: April 28th, 2004, 18:19

Joined: April 12th, 2004, 22:45
Posts: 13
Location: mexico

I have a WD2000JB, i took the firmware copy from that drive and put it on my bad drive. It did not work, the drive does not knock anymore. I tried to copy the orignal firmware area and it would not allow to copy, it had trouble.

I still cannot access the data on this drive, any hope or is this drive now dead for data recovery?

Top

edfajardo

Post subject: Re: WD2000JB bad firmware area

Posted: January 10th, 2008, 18:24

Joined: January 10th, 2008, 18:15
Posts: 5

I have a WD2000JB-75DUA0 and cannot find the firmware for it anywhere. Can you send me a copy of the firmware you have or else can you point me to where I could find it?
Thanks

Top

beto

Post subject: Re: WD2000JB bad firmware area

Posted: January 11th, 2008, 1:01

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico

Ok let me know if im understanding correctly? U read all modules from donnor, and write modules on patient HDD to Data Recovery its that right?

Top

edfajardo

Post subject: Re: WD2000JB bad firmware area

Posted: January 11th, 2008, 9:21

Joined: January 10th, 2008, 18:15
Posts: 5

I wish, what happened wsa I was preparing to copy the firmware from the WD2000JB to the system in order to make a backup, instead I ended up writing the firmware from a WD120JB to the drive.

help.............

Top

Page 1 of 1

[ 4 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 87 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum