MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
jono-ats
 Post subject: What does this Seagate Terminal Message mean?
PostPosted: January 25th, 2008, 23:07 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
I'm trying to recover data from a Seagate 160 GB SATA drive and got the message below in Terminal mode.

I have a PC3000.

What does the message mean, and what is the next step in Data Recovery?

Thanks
Jon


T>1
Burst 0001
T>1
Burst 0002Pgm=00 Trk=FFFFF(161B8:00[17027]).0(0).080(080) Zn=0 Err=00 ErCt=0000 Hlth=0008 CHlth=0000 Ready LBA=000003EA
Pgm=00 Trk=FFFFF(161B8:00[17027]).0(0).080(080) Zn=0 Err=00 ErCt=0000 Hlth=0008 CHlth=0000 Ready LBA=000003EA
(P)SATA Reset
DiskAccess ReadSector EC=47 at ffffffff.00.0002
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Failure!
DiskAccess ReadSector EC=43 at ffffffff.00.022b
Failed sys sect. write! Nwt Er 00 RdWr 161bc.00.022b
DiskAccess ReadSector EC=43 at ffffffff.00.0080
DiskAccess ReadSector EC=47 at ffffffff.00.0080
Unable To Load Overlay 01|000A

T>H,,22
Command Inactive - No VALID Cert Code Detected
T>H,,22
Cmd Cyl Hd Sct Cnt Stbuf Segl Csct Cbuf Actv ErCd RWOp Rd Wr RWOp1 Flags
3E 00100818 00 0000 0000 0000 0000 0080 0818 N 00 F7FF.58.80.008F 1800

_________________
http://www.datasaversllc.com
Top
 Profile  
 
Pradipta Kumar Pal
 Post subject: Re: What does this Seagate Terminal Message mean?
PostPosted: January 26th, 2008, 1:01 
Offline

Joined: January 24th, 2008, 6:58
Posts: 8
The message simply means bad sector. You can try some parallel software by OnTrack.
Top
 Profile  
 
F-99
 Post subject: Re: What does this Seagate Terminal Message mean?
PostPosted: January 26th, 2008, 10:36 
Offline

Joined: January 26th, 2008, 9:57
Posts: 5
Is it only data retrieved that yo need?
Top
 Profile  
 
jono-ats
 Post subject: Re: What does this Seagate Terminal Message mean?
PostPosted: January 26th, 2008, 11:29 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
The drive never comes ready, so I doubt that software alone would recover the data.

And yes, it is just data recovery that I am seeking.

Thank you.

Jon

_________________
http://www.datasaversllc.com
Top
 Profile  
 
Pradipta Kumar Pal
 Post subject: Re: What does this Seagate Terminal Message mean?
PostPosted: January 26th, 2008, 15:10 
Offline

Joined: January 24th, 2008, 6:58
Posts: 8
The drive can not read even the Sector0, if it never comes ready. Theres a very little hope of getting the data back my friend :ddown: . Download MHDD and see if it is able to initialise and scan the hard disk drive...
Top
 Profile  
 
darkforce1
 Post subject: Re: What does this Seagate Terminal Message mean?
PostPosted: January 27th, 2008, 1:50 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
Its head problem. Common in Seagate 160 3.AAE model. nead head change to get data.

DF :)

_________________
DF :)
www.datatracksystem.net
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1034 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group