MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 18 posts ] 
  Previous topic | Next topic 
Author Message
carlitos
 Post subject: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 10th, 2008, 15:29 
Offline

Joined: November 15th, 2006, 16:19
Posts: 15
Hello gurus,
on a Maxtor HDD the motor IC has smoked!
Thiese are the data of the dead HDD:

YAR41BW0 K,M,B,D
S/N: Y3594P8E
6Y 120 L0 03 26 11
Agere Ardent C8-C1
M6FYA
Y3594P8E FY03A

I have also these DiamondMax Plus 9, and I would like to know if I have the chance of a PCB swapping, without buying a new PCB.

Disk #1:
YAR41BW0 K,M,G,A
S/N: Y47J5A4E
6Y 160 P0 04 28 11
Agere Ardent C8-C1
M8FYB
Y47J5A4E FY04A

Disk #2:
YAR41BW0 K,G,G,A
S/N: Y466TAJE
6Y 160 P0 04 28 11
Agere Ardent C8-C1
M8FYB
Y466TAJE FY04A

I have also some DiamondMax 10 and 8, but I think they aren't good for PCB swapping!!!
tnxxx
carlitos
Top
 Profile  
 
pcimage
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 10th, 2008, 16:09 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Post a pic of the PCB (patient)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
carlitos
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 10th, 2008, 16:13 
Offline

Joined: November 15th, 2006, 16:19
Posts: 15
of the broken one?
Top
 Profile  
 
carlitos
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 10th, 2008, 16:27 
Offline

Joined: November 15th, 2006, 16:19
Posts: 15
Attachment:
File comment: PCB smoked motor IC
pcb120b.jpg
pcb120b.jpg [ 233.57 KiB | Viewed 8225 times ]

Attachment:
File comment: Top Sticker
sticker120.jpg
sticker120.jpg [ 64.67 KiB | Viewed 8192 times ]


Tnx
carlitos
Top
 Profile  
 
harddrivespecialist
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 10th, 2008, 20:55 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
Hi!

Any of those boards will match your burned board.

_________________
www.datarecoveryne.com
Top
 Profile  
 
jono-ats
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 10th, 2008, 21:06 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
harddrivespecialist wrote:
Hi!

Any of those boards will match your burned board.


Best to migrate the EEPROM from your PCB to the donor to ensure compatibility.

Jon

_________________
http://www.datasaversllc.com
Top
 Profile  
 
Starling
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 10th, 2008, 22:13 
Offline

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada
both should be good.
Top
 Profile  
 
pepe
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 11th, 2008, 2:43 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
jono-ats wrote:
harddrivespecialist wrote:
Hi!

Any of those boards will match your burned board.


Best to migrate the EEPROM from your PCB to the donor to ensure compatibility.

Jon


the patient PCB does not have external flash ROM...
but the others should be working...

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
pcimage
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 11th, 2008, 4:11 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Yep, should be good.

Go for it.

Your patient does not have external EEPROM.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
carlitos
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 11th, 2008, 5:06 
Offline

Joined: November 15th, 2006, 16:19
Posts: 15
Ok, thanks to all!
I will try the 2 PCB and I will inform you about the results. :)
Can you explain me what you said? Is the esternal flash ROM the chip where the firmware is stored? Where it should be located? In my case where the firmware is stored?
tnx
Top
 Profile  
 
gsimon
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 11th, 2008, 5:19 
Offline

Joined: October 7th, 2005, 2:03
Posts: 152
Location: serbia
before you put new pcb on HDD
you must check that HDA is ok !!!

IF HDA is shorted the new pcb could be burnt also .....

_________________
Spasavanje podataka
Top
 Profile  
 
carlitos
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 11th, 2008, 5:30 
Offline

Joined: November 15th, 2006, 16:19
Posts: 15
Thank you gismon.
In my case, how can I check this with the multimeter?
Top
 Profile  
 
pepe
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 11th, 2008, 11:46 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
Hi

there was a topic about this matter about a year and a half ago...

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
carlitos
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 11th, 2008, 18:28 
Offline

Joined: November 15th, 2006, 16:19
Posts: 15
:( :? RESULTS! :( :?
I have checked and my HDA should be ok. Pin 3 is a GND and pin 4 & 5 aren't 0 Ohm with GND.
So I have swapped the PCB with the first donor: the HDD spins-up but after 1-2 seconds I hear a noise like a vibration of the arm onto the case. I have immediately powered-off the HDD and I have restored the donor HDD with its PCB. It is still working! :lol:
Exactly the same is happened with the second donor HDD.
Any suggestion?
Is this a wrong matching or.....?
tnx guru!
carlitos
Top
 Profile  
 
pcimage
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 11th, 2008, 19:08 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Sounds like you have a head and/or preamp failure. :-(

Time to admit defeat and send to a pro.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
carlitos
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 12th, 2008, 2:56 
Offline

Joined: November 15th, 2006, 16:19
Posts: 15
Other sounds will be appreciated! :)
carlitos
Top
 Profile  
 
beto
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 14th, 2008, 0:19 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico
U should check the ATA registers too what did u get, BSY reach´s DRDY DSC? knocks how many knocks , if knocks, maybe that shortcut damaged the Preamplifier u need to send to a DR company on that case where are u based?

Best Regards
Top
 Profile  
 
carlitos
 Post subject: Re: PCB Swapping list for DiamondMax Plus 9
PostPosted: March 16th, 2008, 14:23 
Offline

Joined: November 15th, 2006, 16:19
Posts: 15
Sorry, I have not understood. Anyway I don't want to make the donor controller unusable, trying it againon the dead hdd. Are you sure (100%) of the compatibility of the donor board with the dead hda?
Could be a wrong matching?
Tnx to all!
Carlo
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 18 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 97 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group