View topic - SP0822N

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

SP0822N

Page 1 of 1

[ 4 posts ]

Previous topic | Next topic

Author

Message

sempre

Post subject: SP0822N

Posted: March 18th, 2008, 15:04

Joined: October 14th, 2005, 9:26
Posts: 1060

Hi to all!

When binding hdd does not turn the engine!

e recognizes it as: BOOT CODE - HANARO 2 ENGINE REV1
FW: HA100-00 LBA: 0 SN:

The problem is in the PCB...

How I can solve this problem?
:vo:

_________________
Нет ничего невозможного

Top

pcimage

Post subject: Re: SP0822N

Posted: March 18th, 2008, 15:37

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Change the PCB and swap ROM

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

rameez

Post subject: Re: SP0822N

Posted: March 19th, 2008, 15:45

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !

this problem also occurs in ROM data curruption also check rom contents.

Top

BlackST

Post subject: Re: SP0822N

Posted: March 19th, 2008, 16:36

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

If the drive has motor directly connected to the PCB via pins (Maxtor style) , remove tin, clean PCB with defluxer, bend the pins toward the PCB so they're going to make a steady contact. If this solves, OK. Otherwise the problem is in the quality of the solder of the PCB or ROM corrupted (flash correct main code for that drive). Other way : check with a suitable matching PCB.
Regards.

Top

Page 1 of 1

[ 4 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 51 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum