View topic - ST3320620AS WITH BURNED PCB

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST3320620AS WITH BURNED PCB

Page 1 of 1

[ 3 posts ]

Previous topic | Next topic

Author

Message

Maestro

Post subject: ST3320620AS WITH BURNED PCB

Posted: March 29th, 2008, 5:37

Joined: August 22nd, 2007, 3:55
Posts: 52

Hi everyone,

I have a Seagate ST3320620AS with burned pcb. PC3K UDMA still doesnt not support this model and the donour drive, have different firmware version.

Can someone help me and tell where firmware is located on this drive so i can resolder the chip?

Thank you all

Maestro
hard_disk_maestro@hotmail.com

Top

darkforce1

Post subject: Re: ST3320620AS WITH BURNED PCB

Posted: March 29th, 2008, 8:03

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India

Which family is this. is it 7200.11 or 7200.10, if 7200.10 or 9 then its supported in UDMA.

U need to change the ROM on PCB. either its "atmel" or 25P10VP or 25Pxxxx.

DF

_________________
DF

www.datatracksystem.net

Top

Maestro

Post subject: Re: ST3320620AS WITH BURNED PCB

Posted: March 31st, 2008, 8:04

Joined: August 22nd, 2007, 3:55
Posts: 52

Hi DF,

Thanx for the help, the model i have is 7200.10 and as far as i know its not supported by PC3K UDMA.

I read in acelab webpage that the update will be released by the end of March.

Does your PC3K supports this model?

Regards
Maestro

Top

Page 1 of 1

[ 3 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 56 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum