MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Hitachi
PostPosted: April 25th, 2008, 6:40 
Offline

Joined: April 25th, 2008, 4:40
Posts: 15
Wish all Fine.

I am new with Hitachi HD.
As far as I know NVRAM is used in Hitachi PCB.
is there All PCB included NVRAM of Hitachi? or few of model left traditional technology?

I am facing problem with HDT722516DLA380. (DLA3 Series)
No power to the PCB.
If I replace the PCB with a identical one, then I need to change the NVRAM to the good pcb must.
My question: where is the NVRAM located for the HDD? as i need to replace with the identical one. (if the hdd pcb include NVRAM)

As far as I know for Hitachi HD, only DLA3 series hd pcb could be used to replace the pcb. capacity does not matter, or other specification does not matter. am I right?

Thanks
RAHAD.


Top
 Profile  
 
 Post subject: Re: Hitachi
PostPosted: April 25th, 2008, 11:11 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4754
Location: Hungary
Hi

NVRAM is a 93C76 flash memory. the ROM version of the donor must match the patient to get a working PCB after swapping NVRAM. Drive family must match, size does not matter.

pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: Hitachi
PostPosted: April 25th, 2008, 15:29 
Offline

Joined: April 25th, 2008, 4:40
Posts: 15
Thanks pepe for ur information.
As far as I know NVRAM is 8 PIN CHIP into the Hitachi HD. I found 2 8 Pin CHIP at the specified model (HDT722516DLA380).

1 is at Left Middle Position and another is down middle position at the HD.
Written at CHIP1: RL76
5V77W

Written at another Chip: PMC
25LV547E
0550

WHICH ONE IS THE NVRAM?
THANK YOU
RAHAD


Top
 Profile  
 
 Post subject: Re: Hitachi
PostPosted: April 25th, 2008, 16:04 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4754
Location: Hungary
Hi,

RL76.
the other is the ROM. u might need to swap that one too if the drive doesn't spin up after NVRAM swapping.

pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: Hitachi
PostPosted: April 25th, 2008, 16:18 
Offline

Joined: April 25th, 2008, 4:40
Posts: 15
Thanx PEPE for ur information again.

I will go ahead with more posting after swapping the NVRAM.
Now I will search for a Identical HDD in the market.
I think DLA3 Matching is enough for the HDD.
if needed the PCB: F 0A30363 01

Thanks
RAHAD


Top
 Profile  
 
 Post subject: Re: Hitachi
PostPosted: April 26th, 2008, 5:13 
Offline
User avatar

Joined: January 26th, 2007, 22:49
Posts: 291
Location: Earth
Hi, if you want to repair NVRAM,plese go to for more details here:
http://support.salvationdata.com/tutorial.htm

If you have any questions, you can contact me.

Best Regards,

Laura

_________________
SalvationDATA--Profesionnal Hard drive solution Provider. MSN: sales.laura@salvationdata.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 86 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group