Hello All,

I have a Maxtor DiamondMax Plus 8 30GB which is dead, numbers on cover - code NAR61590 6E030L050201 AAA SN E105ZPBE

The problem I have is the HDD cant be seen by the OS and doesnt seem to power up.

Can anyone suggest a way to fix this? IM guessing I might need a new PCB but where can I get one from and what about compatability issues?

All info welcome.

Hi,

I think U can find such drive on ebay or local second hand stores and web pages.

pepe

_________________
Adatmentés - Data recovery

Dear,
For MAXTOR DM 8 Series..
6E0 or max dm 8 similar board is ok.
Capacity does not matter.
Thank You
SHAHI

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com

Hi!

I have a board for that drive.

"6E0 or max dm 8 similar board is ok."

There is at least one more parameter has to match, besides a family of the drive.

_________________
www.datarecoveryne.com

Thanks for all the replies, the firmware revision is nar61590, controller chip is ardent.

HardDriveSpecialist you have pm

tell the whole number eg : Ardent c5-c1