MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 4
  [ 71 posts ]  Go to page Previous  1, 2, 3, 4  Next
  Previous topic | Next topic 
Author Message
helpdisc
 Post subject: Re: head change tool
PostPosted: January 30th, 2008, 6:51 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
so You are suggesting what?
that it is better for heads to go over the platters?
Yes it can be done using papper, but this is much better i think
Don't You agree?
btw: I am sure I changed more heads then You.

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
rapiddata
 Post subject: Re: head change tool
PostPosted: January 30th, 2008, 15:21 
Offline

Joined: January 24th, 2008, 8:20
Posts: 6
Odiferous wrote:
helpdisc wrote:
it is a tool underdevelopment I will be selling it, we plan to make it for all drives, it will be good for head change on drives with and withouth motor stuck problems because heads do not tuch surface in any time, nor they touch togeather.


And another old wives' tale...

Most modern drives suffer no ill effects whatsoever if the heads are allowed to touch.

You will know you have a problem if they "stick" when you try to prise them apart. Granted, this will be too late, but with a little experience, you will learn to know which drives can safely come through the heads touching, and save yourself a lot of unnecessary trouble.


Any plans to market your own tools? You may not need to recover another hard drive again if you sell enough of them :wink:
Top
 Profile  
 
zed
 Post subject: Re: head change tool
PostPosted: May 20th, 2008, 10:28 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
Is this tool for sale yet? In December last year you said it will be ready for sale in 1 month.
Top
 Profile  
 
Odiferous
 Post subject: Re: head change tool
PostPosted: May 20th, 2008, 16:02 
Offline

Joined: November 28th, 2004, 1:54
Posts: 319
rapiddata wrote:
Odiferous wrote:
helpdisc wrote:
it is a tool underdevelopment I will be selling it, we plan to make it for all drives, it will be good for head change on drives with and withouth motor stuck problems because heads do not tuch surface in any time, nor they touch togeather.


And another old wives' tale...

Most modern drives suffer no ill effects whatsoever if the heads are allowed to touch.

You will know you have a problem if they "stick" when you try to prise them apart. Granted, this will be too late, but with a little experience, you will learn to know which drives can safely come through the heads touching, and save yourself a lot of unnecessary trouble.


Any plans to market your own tools? You may not need to recover another hard drive again if you sell enough of them :wink:



Absolutely. The H.Ex (head extraction tool) is already in development - but the P.Ex (about to be launched) takes precedence.

And I have every intention of moving away from data recovery (perhaps not entirely) into other areas, such as R&D etc.

Watch the IT press for details...
Top
 Profile  
 
Odiferous
 Post subject: Re: head change tool
PostPosted: May 20th, 2008, 16:08 
Offline

Joined: November 28th, 2004, 1:54
Posts: 319
helpdisc wrote:
so You are suggesting what?
that it is better for heads to go over the platters?
Yes it can be done using papper, but this is much better i think
Don't You agree?
btw: I am sure I changed more heads then You.


What do you hope to achieve by claiming to have changed more heads than I?

As every woman says, it's not the quantity - it's the quality. Well, that's what I would prefer every woman to say!

Helpdisc, I cannot even begin to count how many head changes I have made. However, successful head changes are surely more important. You can have changed 20,000 heads badly - or 5,000 heads well. Which is better for business and for your clients?
Top
 Profile  
 
helpdisc
 Post subject: Re: head change tool
PostPosted: May 21st, 2008, 3:18 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
Sir, I think that You need to behave like a gentleman with ladies and in buisnies, man asked me for a date not You.
As far as our tool, i hope this version 1.3 will be ready this week, we have found some problems with previos designs, and we want to go out on market with apsolutley working tool.
Our tool is good because in cases of bad motor, You can change heads witouth them tuching the surface. Even if motor is ok, baybe can change heads with this tool. I hope in Friday this week I will be able to put some more pictures.....
thanks for patience it will pay off

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
helpdisc
 Post subject: Re: head change tool
PostPosted: May 21st, 2008, 4:58 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
here is a picture of 1.2 version new will come this week ( i think final )


Attachments:
08052008028.jpg
08052008028.jpg [ 390.05 KiB | Viewed 11613 times ]

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
zed
 Post subject: Re: head change tool
PostPosted: May 23rd, 2008, 12:06 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
Helpdisc , Are you selling this tool or the older version of it? If so - what's the web site address or information on how to buy 1?
Top
 Profile  
 
zed
 Post subject: Re: head change tool
PostPosted: May 25th, 2008, 8:22 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
I thought i would share this linke - it shows a data recovery engineer using a head swapp tool in this video:
http://datarecoveryinfonews.blogspot.co ... -data.html
Top
 Profile  
 
helpdisc
 Post subject: Re: head change tool
PostPosted: July 7th, 2008, 9:04 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
head change tool for maxtor dm9 and dm10 is finished. It is made from dural ( non magnetic aluminium ) and it works great.
It keep heads and platters tuching as well as heads tuching them selfs...
You can use same heads on meny recoveryes because head do not get bad.
More info on serbia@helpdisc.com soon on new web site....
We are curently working on seagate 7200.10 up to 500Gb....
thanks for patience....
Nikola


Attachments:
3.jpg
3.jpg [ 47.9 KiB | Viewed 11406 times ]
2.jpg
2.jpg [ 58.23 KiB | Viewed 11385 times ]
1.jpg
1.jpg [ 49.01 KiB | Viewed 11380 times ]

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
helpdisc
 Post subject: Re: head change tool
PostPosted: July 7th, 2008, 9:07 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
here are more pictures


Attachments:
4.jpg
4.jpg [ 55.61 KiB | Viewed 11396 times ]
5.jpg
5.jpg [ 47.61 KiB | Viewed 11409 times ]
6.jpg
6.jpg [ 47.87 KiB | Viewed 11408 times ]

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
helpdisc
 Post subject: Re: head change tool
PostPosted: July 7th, 2008, 9:09 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
more pictures


Attachments:
7.jpg
7.jpg [ 54.66 KiB | Viewed 11407 times ]
10.jpg
10.jpg [ 57.98 KiB | Viewed 11382 times ]
11.jpg
11.jpg [ 43.81 KiB | Viewed 11384 times ]

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
helpdisc
 Post subject: Re: head change tool
PostPosted: July 7th, 2008, 9:13 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
and finaly


Attachments:
12.jpg
12.jpg [ 41.63 KiB | Viewed 11387 times ]
13.jpg
13.jpg [ 46.93 KiB | Viewed 11387 times ]
14.jpg
14.jpg [ 45.38 KiB | Viewed 11393 times ]

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
rchadwick
 Post subject: Re: head change tool
PostPosted: July 7th, 2008, 11:21 
Offline

Joined: December 23rd, 2006, 16:08
Posts: 935
Location: NJ
Looks Good :)
Top
 Profile  
 
helpdisc
 Post subject: Re: head change tool
PostPosted: July 7th, 2008, 14:27 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
thanks,it works much better

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
TerraNova
 Post subject: Re: head change tool
PostPosted: July 8th, 2008, 0:28 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
well done, looks real stuff.
Top
 Profile  
 
shaun
 Post subject: Re: head change tool
PostPosted: July 8th, 2008, 15:58 
Offline

Joined: July 8th, 2006, 6:18
Posts: 222
Is that the tool you recommended me to buy in my Momentus with stuck spindle post? I can imagine how this thing could help me bake small cakes, but not how it will secure a platter stack, actually, it looks too big to fit around the platters in a 2,5" drive.
Top
 Profile  
 
helpdisc
 Post subject: Re: head change tool
PostPosted: July 8th, 2008, 16:01 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
this was mine post about NON salvation data tools...

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
wiseleo
 Post subject: Re: head change tool
PostPosted: July 8th, 2008, 18:40 
Offline

Joined: June 28th, 2008, 0:37
Posts: 225
Location: San Francisco Bay Area www.harddiskcrashed.com
helpdisc wrote:
this was mine post about NON salvation data tools...


So, getting back on topic ;-)

The video looks good. May I recommend a better microphone? I use a Zoom H2 for my video narration.

When are you making your tools available for purchase?

I don't need it yet, but my volume may be sufficient to require it soon. :)
Top
 Profile  
 
mr_spokk
 Post subject: Re: head change tool
PostPosted: July 8th, 2008, 19:43 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden
shaun wrote:
Is that the tool you recommended me to buy in my Momentus with stuck spindle post? I can imagine how this thing could help me bake small cakes, but not how it will secure a platter stack, actually, it looks too big to fit around the platters in a 2,5" drive.


Hi, in their "kit" there is a 2.5 version of their tool aswell...

Helpdisc: "this was mine post about NON salvation data tools..." of course it was, and still is :-) just a small detour...

Regards/ Bosse

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 4
  [ 71 posts ]  Go to page Previous  1, 2, 3, 4  Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: ccc and 99 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group