View topic - General (and not general)Seagate questions

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

General (and not general)Seagate questions - for everyone :)

Page 1 of 4

[ 72 posts ]

Go to page 1, 2, 3, 4 Next

Previous topic | Next topic

Author

Message

N.C.

Post subject: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 6:57

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary

Hello Gurus,

Let me start the questions: :mrgreen:

I have one ST3300931A, with a lot of bad sectors (not exactly in fixed place), and when i trying to image, i have got this message on the terminal:

.....
ATA St d0 Er 40 Op 25 e, 699cc4f,0800 0800 0000
Niwot: 00013d00 ae 00013d00.0.036 0000 110e 0000 5901
AT Er 00 Nwt Er 43 RdWr 0435a.00.02f9
ATA St d0 Er 00 Op 25 e, 6ec0087,0800 0700 0000
Niwot: 06ec0087 3a 06ec0087.0.0c0 8000 19b3 07fe 0000

CE Log EC=43 Rtype=6 OV=0 STStatus0
AutoRd Err 43 at ffffffff.00.0081

Read Ver Retrys
AutoRd Err 43 at ffffffff.00.0081

Read Ver Retrys
AutoRd Err 43 at ffffffff.00.0081

Read Ver Retrys
AutoRd Err 43 at ffffffff.00.0081

Read Ver Retrys
AutoRd Err 43 at ffffffff.00.0081

Read Ver Failure!
Failed sys sect. write
Not handled software path:

This point the drive is knocks one big, and stay BSY forever.

Now, the drive can init again, but very soon drops this issue again, so, in this way, i can't countinue the imaging without hw controll....

Somebody have any suggestion?

Thanks,
Janos

Top

guru

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 8:56

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England

Have you disabled all error correction options?

_________________
All went well until I plugged the drive in.

Top

N.C.

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 9:13

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary

No, i have only run the T4, the head test, and leave the cable on the hdd when the image copy runs....

Top

jono-ats

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 9:31

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA

How do you disable ECC options in Seagate Terminal Mode?

_________________
http://www.datasaversllc.com

Top

Doomer

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 10:25

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago

descrease copy waiting time to 50ms

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Top

N.C.

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 12:38

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary

Doomer wrote:

descrease copy waiting time to 50ms

This is for wich question?

For the "Not handled software path:", or the ECC?

Thanks,
Janos

Top

Amarbir[CDR-Labs]

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 13:07

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

N.C. wrote:

Hello Gurus,

Let me start the questions: :mrgreen:

Janos ,
I Have a Stupid Question what Imaging Software/Hardware You Are trying

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

Doomer

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 13:30

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago

N.C. wrote:

Doomer wrote:

descrease copy waiting time to 50ms

This is for wich question?

For the "Not handled software path:", or the ECC?

Thanks,
Janos

The "Not handled software path:" and hng after is a firmware bug. It occurs when drive finding hardware bad block trying to process it. You need to prevent drive from processing such bad block -> you need to decrease waiting time in copy process and kill that bad-block-processing-stuff with software reset

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Top

Amarbir[CDR-Labs]

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 13:34

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

Doomer wrote:

N.C. wrote:

Doomer wrote:

descrease copy waiting time to 50ms

This is for wich question?

For the "Not handled software path:", or the ECC?

Thanks,
Janos

Doomer ,
Whats Your Best Setting In PC 3000 PCI Data Extractor ,Currently the Jobs At Hand are giving me a tough time doing imaging too

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

Doomer

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 14:35

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago

Amarbir wrote:

Doomer ,
Whats Your Best Setting In PC 3000 PCI Data Extractor ,Currently the Jobs At Hand are giving me a tough time doing imaging too

If you want step-by-step solution I can provide it for you for $500 :lol:

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Top

Amarbir[CDR-Labs]

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 14:45

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

Doomer wrote:

Amarbir wrote:

Doomer ,
Whats Your Best Setting In PC 3000 PCI Data Extractor ,Currently the Jobs At Hand are giving me a tough time doing imaging too

If you want step-by-step solution I can provide it for you for $500 :lol:

Hi ,
If You Are Joking Its OK If you Are Serious I Will Do that Myself and Present You a Solution Here ,I Do DR Mostly As one of the Activities in My Profession of Sales,Repair of It Material

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

Doomer

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 14:47

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago

Amarbir wrote:

I Will Do that Myself and Present You a Solution Here

Why are you asking then?
do it yourself and share it
everybody will be happy
I gave you a solution now it is simple monkey-work

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Top

Amarbir[CDR-Labs]

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 14:53

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

Doomer wrote:

Amarbir wrote:

I Will Do that Myself and Present You a Solution Here

Why are you asking then?
do it yourself and share it
everybody will be happy

Well ,
Thats Not a Issue With Me Mate .Next Time You Ask Any Question i will Reply In the Same Fashion .It Was Very Sweet of You To Reply Like That Great Wish You Luck.Well i am Not Like your Newbie Clients ,There is No Reason For All Of Us To Be in the forum here if this is the way we have to talk and resond to questions .I will make sure next time i am not cross questioning you at all ,I Will Not Like any thing Here Thats Breaks the essence of this great forum.

Period .

PS :If You think i Have sleeping When Not Active on The Forum ,Well Stop Dreaming

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

Doomer

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 14:57

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago

Amarbir wrote:

Next Time You Ask Any Question i will Reply In the Same Fashion

I can live with that
BTW I am not asking technical questions on this forum, only answering, so you will be waiting for very long period of time :lol:

PS: I am not doing monkey-work for free it's making me sick

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Top

Doomer

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 15:03

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago

Amarbir wrote:

Well i am Not Like your Newbie Clients

Of course you are
You just think you are not
Buying PC3K is not making you a master it just making you more dangerous (for HDDs) newbie

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Last edited by Doomer on October 9th, 2008, 15:04, edited 1 time in total.

Top

Amarbir[CDR-Labs]

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 15:03

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

Doomer wrote:

Amarbir wrote:

Next Time You Ask Any Question i will Reply In the Same Fashion

I can live with that
BTW I am not asking technical questions on this forum, only answering, so you will be waiting for very long period of time :lol:

PS: I am not doing monkey-work for free it's making me sick

Sorry ,
But I do Not think everyone is Asking You to Reply .You Are Collecting Data and Experiences From this Forum Like all Of Us So Stop Saying That ,If You Are That Expert In this Field No Need To Be On any Forums [ AS YOU WILL KNOW EVERYTHING ] .You Should Now Concentrate To earn More As You Are The Master In DR Field .

PS :Its Not Nice To Be So Arrogant .And Do You Really thing If you Had answered My Question i Would Have Imaged the Drive Faster HAa HAa HAA What a Joke

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

Doomer

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 15:06

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago

Amarbir wrote:

Sorry ,
But I do Not think everyone is Asking You to Reply .You Are Collecting Data and Experiences From this Forum Like all Of Us

forums are very good source of fun for me
Probably I'm making a very good experience in fun

Amarbir wrote:

PS :Its Not Nice To Be So Arrogant

I am not a nice person. Deal with it
I made an offer for you - you asking me for monkey-work (step-by-step solution) I am asking you for $500 because I really don't like to do monkey-work. It is just compensation

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Top

guru

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 17:36

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England

I'm crying it hurts :lol:

_________________
All went well until I plugged the drive in.

Top

Amarbir[CDR-Labs]

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 18:04

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

guru wrote:

I'm crying it hurts :lol:

Guru ,
I Choose to Keep quite Like a Gentlemen .Whats Makes You Laugh ,Well He Has No answer To this anyways lol

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

Amarbir[CDR-Labs]

Post subject: Re: General (and not general)Seagate questions - for everyone :)

Posted: October 9th, 2008, 18:07

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

Doomer wrote:

Amarbir wrote:

Sorry ,
But I do Not think everyone is Asking You to Reply .You Are Collecting Data and Experiences From this Forum Like all Of Us

forums are very good source of fun for me
Probably I'm making a very good experience in fun

Amarbir wrote:

PS :Its Not Nice To Be So Arrogant

Doomer ,
I Asked You For a suggestion ,Keep It To Yourself Or Lock It Somewhere ,I Do Not Need Your Suggestions At All ,Had No Idea You Are Like This Keep them In a Locker Safely will Help You De Better Things and Leave Me alone In The Forum.

PS :I Have Better things Do Do them Your Monkey Tactics ,Even i am Not that Nice Person To Deal With ,So Lets Finish It Right Here Before it Gets Ugly in here

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

Page 1 of 4

[ 72 posts ]

Go to page 1, 2, 3, 4 Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 42 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum