MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Research and development

All times are UTC - 5 hours [ DST ]

Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
9000cse
 Post subject: Hi, I'm new here, and need help.
PostPosted: November 14th, 2008, 12:13 
Offline

Joined: November 14th, 2008, 12:06
Posts: 3
Location: Southampton, UK
But don't we all......
I have a Samsung SP0802N and need a schematic for the main board. Any ides where I can find one?
I put 16v through it by mistake and blow a SMC, the one to the left of the middle screw. looking at the drive with the spindle cable to the top.
So, can about help here?

TIA
Andy
Top
 Profile  
 
pcimage
 Post subject: Re: Hi, I'm new here, and need help.
PostPosted: November 14th, 2008, 12:22 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Post a pic

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
9000cse
 Post subject: Re: Hi, I'm new here, and need help.
PostPosted: November 14th, 2008, 12:35 
Offline

Joined: November 14th, 2008, 12:06
Posts: 3
Location: Southampton, UK
OK, here goes.

In the main pic. you can see where it sits, just to the left of that PK screw, the bottom pic is the SMC. I think it could be a diode, maybe a votreg. Anyway, what do you think? I have just DLL Palo_SVC_Manual_Eng.pdf which is great, but, does not show any components.


Attachments:
SP_A0013.jpg
SP_A0013.jpg [ 745.53 KiB | Viewed 7791 times ]
SP_A0012.jpg
SP_A0012.jpg [ 435.7 KiB | Viewed 7789 times ]
Top
 Profile  
 
hddguy
 Post subject: Re: Hi, I'm new here, and need help.
PostPosted: November 14th, 2008, 12:46 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
Pic is blurry, but seems it is a power diode. You should be able to simply 'replace' this with one from a donor PCB, no need to worry about compatibility.
Top
 Profile  
 
networkpc3000
 Post subject: Re: Hi, I'm new here, and need help.
PostPosted: November 14th, 2008, 13:27 
Offline
User avatar

Joined: December 16th, 2007, 10:26
Posts: 1151
hello,
i am sure that is diode.

_________________
data recovery service[/b]
Top
 Profile  
 
9000cse
 Post subject: Re: Hi, I'm new here, and need help.
PostPosted: November 16th, 2008, 6:54 
Offline

Joined: November 14th, 2008, 12:06
Posts: 3
Location: Southampton, UK
Thanks Guys, that's what I was thinking, Diode, will have a look through the c&^p I have as see if I have one, failing that I will pop over to RS, I doubt if Maplin would have one.
I'll let you all know if I fix the problem.
Andy :)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Research and development

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group