Hi,
i'm french so please apologize for my poor english...
I've swap the +5 and +12 volts of my Wetsern digital hard drive (it was in an external "ide to usb" box and i have powered it with the wrong power supply ,+5 and +12 volts were opposite on the plug...).

May i ask you if someone as a similar pcb to sell please .

Hard Drive description

WESTERN DIGITAL WD2000

WD P/N : WD2000JB-98GVA0

PCB # : 2061_001265_200AB

I hope that you will understand my resquest and you will have the right pcb.

Thank you very much for your help

Have a nice day

It will be unlikely that you will simply be able to replace PCB. You may need to solder over ROM chip, and this is assuming the fried PCB has caused no damage to any internal components.

you can get away with not swapping ROM chips if you have a good match. I have often just matched the model completely and get a good working drive again.

_________________
The last I heard of God he was worshiping me

Yes, but I am guessing you hold a rather large stock of parts and have a much larger choice of PCBs.

i think swap the ROM as well.

_________________
data recovery service[/b]

So what do you think i should do now ?

find the right PCB and swap original ROM to new PCB. i have this PCB if you need. contact me. sunnydreamspace@hotmail.com

_________________
data recovery service[/b]