MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]


Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  [ 24 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: RAID Data Recovery - Anyone Beat This?
PostPosted: November 15th, 2008, 6:35 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
Can you get the settings from the unit or controller, like stripe size? Probably uses backwards parity as it is adaptec. Use only the 2 good disks, add a missing disk place, and work through the orders using the stripe size (if available) from the controller. This should leave you with as little as 6 combinations, build with UFS and perform RAW scan, it can be stopped at around 5 or 10%, then check integrity of data from RAW scan above stripe size. You should be able to tell which order is right by the integrity, then create an image of this order.


Akk this assuming the data has not been overwritten or modified.

Good Luck :D


Top
 Profile  
 
 Post subject: Re: RAID Data Recovery - Anyone Beat This?
PostPosted: November 15th, 2008, 8:14 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
Now we have one good, synced disk, one failed with hw problems + off-sync, and one wich is 0-45% equal with the first disk, and 45-100% are the good second disk.

The raid have ext3.

Anyway, i can recover aproximately 70-95%, but now, it depends on the customer.... ;)
(i am waiting for agree the price)

Regards,
Janos


Top
 Profile  
 
 Post subject: Re: RAID Data Recovery - Anyone Beat This?
PostPosted: November 15th, 2008, 12:03 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
Let us know how you get off with this :)


Top
 Profile  
 
 Post subject: Re: RAID Data Recovery - Anyone Beat This?
PostPosted: November 15th, 2008, 20:03 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
First i need to determine the perfect disk wich is in sync and not overwritten by the other.
Next, i need to determine the strip size, and try to figure out the disk order
(For this of course i need to image the hw failed good content but off-sync hdd.)
If i have the stripe size, the good drive, the halfly off-sync drive, and the overwritten drive, i can assemble the raid, and check the order on the 45-100% part.
If the raid looks good, i can drop the off-sync drive, and copy the image out from 45% to the end.
This part is 55% good raw area. ;)

After this, i will add the off-sync hdd again, and drop the overwrtten one, and copy the 0-45% to the previus saved another area.
This 2 part will make one 55 - ? % good image.
Here comes the FS reconstruction from EXT3.
This is good, because the EXT3 have a lot of superblock, and some in the end of the drive. ;)
If i think, i will end about 70-95% success, of course depend on the off-syncness of the 3rd. hdd....
;)

...and of course on the customer first.
This is not too easy and not cheap process.... :mrgreen:

PS:
I always say, any raid is almost all the cases recoverable!
Usually more than 95% the chance for the successfully dr from raids....

Regars,
Janos


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group