MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
zebong
 Post subject: HITACHI IC25N060ATMR04-0
PostPosted: November 28th, 2008, 12:08 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
Hello,

i have an HITACHI IC25N060ATMR04-0, when i connect to the PC3K it gives BSY, and dont SPIN.
Remove the PCB just connect the PCB and also give BSY dont go to the DRD DSC.
If i change the disk with other PCB the disk SPIN and give DRD DSC.

I Would like to know it looks like a NVRAM or ROM Problem that make the disk dont SPIN.

Anyone was this Problem?

What should i do

Thanks
ZeBong

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
pcimage
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: November 28th, 2008, 12:22 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Let me get this right.

If you put a new PCB on the patient drive, it spins and comes DRDY, right?

But with the native PCB it does not spin, right?

What happens if you put the "suspect" PCB on the donor drive?

Sean

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
rameez
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: November 28th, 2008, 13:57 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
Did u change orignal NV-ram to donor pcb ?
Top
 Profile  
 
zebong
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: November 28th, 2008, 14:02 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
rameez wrote:
Did u change orignal NV-ram to donor pcb ?


Hi,
Not yet, if a resolder the NVRAM the disk will SPIN ?

ZeBong

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
rameez
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: November 28th, 2008, 14:13 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
yes solder the NVRAM on the working pcb it will suerly work .
Top
 Profile  
 
zebong
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: November 28th, 2008, 15:14 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
pcimage wrote:
Let me get this right.

If you put a new PCB on the patient drive, it spins and comes DRDY, right?

But with the native PCB it does not spin, right?

What happens if you put the "suspect" PCB on the donor drive?

Sean


Hi Sean,
it happen the same thing it give always BSY.

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
pcimage
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: November 28th, 2008, 15:19 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Sounds like a bad PCB then.

You DO need to move the NVRAM over, as this contains info specific to the SA of the patient drive.

Classic sign of incompatible NVRAM is that the drive spins up, comes DRDY but will not ID.

Sean

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
zebong
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: November 28th, 2008, 15:22 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
Ok i see but i have this PCB

Patient
14R9060
J41063D
N13440
00T0

DONOR:
08K2772
H69401A
N1N446
4281


Will be compatible ?

Thanks

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
rameez
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: November 29th, 2008, 12:24 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
It will become compatible as soon as u swap NVRAM .
Top
 Profile  
 
pcimage
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: November 29th, 2008, 14:46 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
rameez wrote:
It will become compatible as soon as u swap NVRAM .


Sure about that?

I have my doubts!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
networkpc3000
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: November 30th, 2008, 22:01 
Offline
User avatar

Joined: December 16th, 2007, 10:26
Posts: 1151
hello,
me too

pcimage wrote:
rameez wrote:
It will become compatible as soon as u swap NVRAM .


Sure about that?

I have my doubts!

_________________
data recovery service[/b]
Top
 Profile  
 
zebong
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: December 1st, 2008, 19:36 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
I see, know i dont know what to do ...

Anyone knows what this numbers for : 1 Line 2 Line 2 Line 4 Line ??

14R9060
J41063D
N13440
00T0


Thanks
ZeBong

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
zebong
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: December 4th, 2008, 14:39 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
Hello Again,

With the donnor PCB the disk Spin but dont give the ready state.
So i change the NVRAM from Patient to donnor, now i can have ready state but the disk still dont SPIN.

Show the picture off reading the NVRAM . OK

Anyone know what maybe be the problem.

Thanks


Attachments:
HITACHI.jpg
HITACHI.jpg [ 83.09 KiB | Viewed 12606 times ]

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
zebong
 Post subject: Re: HITACHI IC25N060ATMR04-0
PostPosted: December 4th, 2008, 15:19 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
Hi again,
i save the NVRAM from client disk and see that is corrupted i compare with other one.

How can i get this NVRAM ?

the PCB Code is:
14R9060
J41063D
N13440
00T0


Attachments:
NVRAM.jpg
NVRAM.jpg [ 160.33 KiB | Viewed 12580 times ]

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group