MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 33 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
sempre
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 3rd, 2008, 6:50 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
No help? :?:
:idea:
:mrgreen:

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 3rd, 2008, 15:56 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
His bad modules 93 and 7b.

copy modules h2 view this blank!

I rewrites it in another hdd?
or how can I repair and access data?

_________________
Нет ничего невозможного
Top
 Profile  
 
dobrevjetser
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 4th, 2008, 3:58 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
Hi Sempre,

As far as i know module 93 is drive specific.
What you could try (i dont know if this works) is to read the module with each head (ignoring errors option) and then compare with a known good module to see if you can make any corrections by hand.

Hope this works.

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
Top
 Profile  
 
sempre
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 4th, 2008, 7:02 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
dobrevjetser wrote:
Hi Sempre,

As far as i know module 93 is drive specific.
What you could try (i dont know if this works) is to read the module with each head (ignoring errors option) and then compare with a known good module to see if you can make any corrections by hand.

Hope this works.

Dobre


I go to try! :mrgreen:

Thanks!!

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 4th, 2008, 8:08 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
which the function of the modules of h2?

_________________
Нет ничего невозможного
Top
 Profile  
 
rameez
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 4th, 2008, 13:20 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
93 is FMTI module it isnt specific u can copy from any hdd with same number of heads .
Top
 Profile  
 
sempre
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 4th, 2008, 13:34 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
rameez wrote:
93 is FMTI module it isnt specific u can copy from any hdd with same number of heads .


After the rewrite of it modulates 93 has that to make other actions to have access the data? :?:

for example to regenerate the translator…

:mrgreen:

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 4th, 2008, 14:20 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
rameez wrote:
93 is FMTI module it isnt specific u can copy from any hdd with same number of heads .


this module is used in full size drives. it contains zone allocation tables and adaptive settings for each zone; therefore the module is essential for access to data. Tables of drive family specifications in chapter 9 indicate full size and half size families.

THANKS FOR HELP!!

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 4th, 2008, 14:30 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
rameez wrote:
93 is FMTI module it isnt specific u can copy from any hdd with same number of heads .


MODULE 93 FMTI
IMPORTANCE Ad

"A- essential for a specific hdd: As - adaptive settings, Ad- translator tables. Replacement of the module with an identical module from another drive will result in the loss of reading/writting settings and data loss (e.g., adaptive data modules);" in MANUAL...

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 5th, 2008, 8:22 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
rameez wrote:
93 is FMTI module it isnt specific u can copy from any hdd with same number of heads .


My friend,

:arrow: this deceived you! it is enough to verify…. that look that each hd has its modulates exactly 93 different being of the same family…

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 5th, 2008, 8:40 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
sempre wrote:
rameez wrote:
93 is FMTI module it isnt specific u can copy from any hdd with same number of heads .


My friend,

:arrow: this deceived you! it is enough to verify…. that look that each hd has its modulates exactly 93 different being of the same family…


LOOK RAMEEZ!


Attachments:
donor2.JPG
donor2.JPG [ 67.1 KiB | Viewed 8590 times ]
donor1.JPG
donor1.JPG [ 66.01 KiB | Viewed 8583 times ]

_________________
Нет ничего невозможного
Top
 Profile  
 
rameez
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 5th, 2008, 14:15 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
Sorry i forgot about this one .
Then u can repair this module by comparing .
Top
 Profile  
 
sempre
 Post subject: Re: LDR Maxtor 6L080L0 needed
PostPosted: December 8th, 2008, 10:15 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Hi to all!!

Somebody already had some similar case or very similar in relation to this problem (it modulates 93 corrupted)? :?:

Or it has an idea of as to obtain to arrive hdd ties the data of this? :?:
:mrgreen:

Thanks advance!!

_________________
Нет ничего невозможного
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 33 posts ]  Go to page Previous  1, 2

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group