Hi.

I have problem with this drive from subject, after updating motherboard bios, my hdd, after reboot dont have 320Gb but 0Gb and 0 LBA's,
Seatools recognize hdd, same as bios, but there is no SMART enable,or disable, but just SMART = Not Found,

Any try to test drive and with LBA error, only work identify,and firmware upgrade,

did some have this firmware to reupload it to drive?
Should i contact SEAGATE for original full firmware,tho he said to me(helpdesk) that there is no available firmware update for this drive.
[img=http://img234.imageshack.us/img234/8629/66323681sj5.th.gif]



By,
Goran

_________________
popust 50% na popravak bussy i 0LBA

Do not waste your time looking for firmware, you will not be able to update it without expensive tools. It is not a mobile phone or DVD player.

If you need the data then send to a pro, otherwise throw it away.

Sorry to be the bearer of this news, but it's the truth!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

gsustek,

Where are you based ?

<itch>

_________________
If you can keep your head when all about you are losing theirs, you probably don't fully understand the situation. ... Mr Kipling

https://www.mjm.co.uk/

Croatia,
so if i understand, there is no official update for this disk od maxtor version, that will be able to rewrite firmware and fix hdd?

_________________
popust 50% na popravak bussy i 0LBA

That problems cannot be solved "updating" firmware , this looks like a problems over firmware on platters, called Engineering Cylinders,System Area Diskware, etc,

ok. so if i have PC-3000 and firmware from

http://files.hddguru.com/index.php

_________________
popust 50% na popravak bussy i 0LBA

No, FW over hdd´s its not like Flash BIOS over MB, read another posts realated to that to understand

regards