MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 4
  [ 65 posts ]  Go to page 1, 2, 3, 4  Next
  Previous topic | Next topic 
Author Message
Iszerda
 Post subject: Maxtor Safe mode jumper
PostPosted: March 17th, 2009, 16:53 
Offline

Joined: March 4th, 2009, 20:43
Posts: 87
Location: hungary
Hi all!

I can't jumper my Maxtor Diamondmax +8 into safe mode.
Can someone help me?
I try jumpers like this : [ATA] ['_::] [POWER]. The platter spins.
Is it correct ? Maybe PCB error ?

Waiting for answers and thanks.
Top
 Profile  
 
poehere
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 18th, 2009, 0:49 
Offline
User avatar

Joined: February 27th, 2009, 3:26
Posts: 1721
Location: French Polynesia Tahiti
Safe mode jumper setting for Maxtor - look on the web they are posted everywhere. There are some DR companies that post them. Just search and you will find them all over the place


Attachments:
HARD DRIVE MODEL.doc [45.5 KiB]
Downloaded 1916 times

_________________
Iorana Haraharaini
Top
 Profile  
 
Iszerda
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 18th, 2009, 2:31 
Offline

Joined: March 4th, 2009, 20:43
Posts: 87
Location: hungary
Thank you for your answer!

I know this document. I set jumpers like ['_::] , but platter spins.
I tried ['II::] also, platter spins.
What is the problem: PCB, cable, motherboard ?
Top
 Profile  
 
cryoborgofthevenus
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 18th, 2009, 3:04 
Offline
User avatar

Joined: October 2nd, 2005, 0:30
Posts: 288
Location: Jakarta - Indonesia
Problem is, you don't use PC 3000 card. If you use the card controller, this won't happen.

_________________
My Forum
Top
 Profile  
 
BGman
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 18th, 2009, 3:05 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
Bad PCB (or bad jumper), I think...
Try PCB only (without HDA). If PCB is OK it should report Ready after some time, if not it will stay Busy...
Top
 Profile  
 
BGman
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 18th, 2009, 3:06 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
cryoborgofthevenus wrote:
Problem is, you don't use PC 3000 card. If you use the card controller, this won't happen.


Not a problem at all... :D
Top
 Profile  
 
cryoborgofthevenus
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 18th, 2009, 3:15 
Offline
User avatar

Joined: October 2nd, 2005, 0:30
Posts: 288
Location: Jakarta - Indonesia
BGman wrote:
cryoborgofthevenus wrote:
Problem is, you don't use PC 3000 card. If you use the card controller, this won't happen.


Not a problem at all... :D


If he directly connects the PCB and apply the power, and connect the IDE cable, of course drive will spin (without card controller) ---> if this not PC 3000 ISA (I'm talking about "cracked" version :D:D)

With PC 3000 card controller, if drive spins in safe mode, the possibilities are :

1. LDR file already loaded.
2. bad PCB

:D

_________________
My Forum
Top
 Profile  
 
Iszerda
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 18th, 2009, 4:46 
Offline

Joined: March 4th, 2009, 20:43
Posts: 87
Location: hungary
Yes, platter spins without PC 3000 card.
Thanks replies.
Top
 Profile  
 
chipmunk
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 22nd, 2009, 7:03 
Offline

Joined: April 18th, 2008, 11:15
Posts: 30
Hi,
Can some one explain what 'safe mode' is?
I will probably sound very stupid in asking but I have learned that not asking is worse...

I gather that it 'opens' some sort of 'direct' access to the drive, but to me then it makes no sense calling it 'safe'...

Thanks!
Top
 Profile  
 
BlackST
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 22nd, 2009, 7:51 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
It's like SEX. It is safe until you play unsafe with it...
Top
 Profile  
 
N.C.
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 22nd, 2009, 9:13 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
BlackST wrote:
It's like SEX. It is safe until you play unsafe with it...


Great observation! :mrgreen:
Agree totally! :mrgreen:
Top
 Profile  
 
jono-ats
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 22nd, 2009, 9:18 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
Sometimes jumpers lose their metal inserts, or fail to make a good connection.

Sorry if I'm belaboring the obvious . . . but be sure to try different jumpers.

_________________
http://www.datasaversllc.com
Top
 Profile  
 
Iszerda
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 22nd, 2009, 14:29 
Offline

Joined: March 4th, 2009, 20:43
Posts: 87
Location: hungary
Hi! Thanks for replies.
Safe mode= init hdd without hdd SA . I think so ...
I'll try other jumpers too.
What is the reason when Maxtor DM+8 modul SRV is 20h and not 1Fh. Can I upload pictures here?
Can I make/reach ALT_SA my hdd with hddrepair?
Top
 Profile  
 
Iszerda
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 22nd, 2009, 14:46 
Offline

Joined: March 4th, 2009, 20:43
Posts: 87
Location: hungary
Sorry, mistake: DISK modul PN is 20h not 1Fh.
I try but BMP not allowed.Try jpg...
Top
 Profile  
 
Iszerda
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 22nd, 2009, 18:18 
Offline

Joined: March 4th, 2009, 20:43
Posts: 87
Location: hungary
Attachment:
bad-w40-b.JPG
bad-w40-b.JPG [ 84.78 KiB | Viewed 13327 times ]


Top
 Profile  
 
BGman
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 24th, 2009, 9:21 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
Module numbers in HDD Repair Are not the same as in PC3000! They are shifted with 1...

Therefore module 20 in HDD Repair correspond to 1F in PC3000, 21 to 20, etc....
Top
 Profile  
 
BlackST
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 24th, 2009, 9:30 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
What a good tool :mrgreen:
Top
 Profile  
 
Iszerda
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 24th, 2009, 10:22 
Offline

Joined: March 4th, 2009, 20:43
Posts: 87
Location: hungary
Thank you BGman!
I was warried about it.
Yes BlackST, this tool is not PC3000 but I have this.
One more question: how can I enter into ALT_SA with this tool, (if possible)?
(and how to switch back to normal SA)


Last edited by Iszerda on March 24th, 2009, 10:26, edited 1 time in total.

Top
 Profile  
 
ccc
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 24th, 2009, 10:25 
Offline
User avatar

Joined: January 9th, 2007, 11:12
Posts: 410
Location: Romania
Iszerda wrote:
One more question: how can I enter into ALT_SA with this tool, (if possible)?
(and how to swith back to normal SA)

With a proper loader...one for ALT-SA and one for MAIN-SA...
Rgds

_________________
www.datasave.ro
Top
 Profile  
 
Iszerda
 Post subject: Re: Maxtor Safe mode jumper
PostPosted: March 24th, 2009, 10:38 
Offline

Joined: March 4th, 2009, 20:43
Posts: 87
Location: hungary
Hi ccc!
So this is possible with this tool. Thanks.
I will search for NCR** type loaders. I think so.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 4
  [ 65 posts ]  Go to page 1, 2, 3, 4  Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 32 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group