HD501LJ

[zebong]

Hi to all,

have this in terminal

Code:

SPW 1.5G LinkOk! ADC: 0002
SpnOk
spd:  0000 0000 0000
H: +00000
ADC: 0002
DAC: 8F8B
Unlatch Tk: 00018708

Unlatch Done
ENG>SRV>
  SvoTbl Loaded
  BD
-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-Tout-
ToutWriteSctLog -- buffer not valid
LED 5B 0000
LED 5B 0000
LED 5B 0000
LED 5B 0000
LED 5B 0000
LED 5B 0000
LED 5B 0000
LED 5B 0000
LED 5B 0000
LED 5B 0000

Any info will be helpfull.

Thanks
ZeBong

[N.C.]

T166 architecture....

You have head/media problems!

[zebong]

strange error .....


Change PCB and could make the disk.

Thanks Janos for the info

[Starling]

Check modules - ALIST might be corrupted.
Also one of the heads most likely is bad - and this has caused ALIST overflow.

[Arthur]

I've have also seen a few of this model with this problem. And it has been ALIST in combination of a possibly weak, but not dead head. Sometimes it has been possible to get such drive temporary up with some restarts. So the PCB swap maybe just was luck?. I've also found another method to start up and access user lba from a LED 5B 0000 error