Hi every body , and thanks to every body who shared their knowledge
I have fujitsu HDD 120 gb came in with Hp laptop , there was some issue , so swap that disk with my 2nd hard drive reinstalled window on that 2nd hard drive, but i could not use drive in my 2 nd bay, so I bought HDD enclosure and reformat the HDD and start working as usual, so i decided to use it to clone my drive ( currently working os ) ,with eseaus some thing happen during that ,now i cant reformat , cant use and it shows me that size 2000 GB ( 2 tb) when in realty my HD is only 120 , now again its useless please help if any body can resolve my problem
parm

I think there is a problem with whatever you are connecting to the hard drive (USB enclosure / adapter / etc).

Try a different USB enclosure.

_________________
http://www.datasaversllc.com

thanks for help
but if I put HDD in 2nd bay i cant start my pc at all, and HDD was working fine with same enclosure
but I will buy new enclosure and try
thanks

so how i can upgrade firmware
???
please help

It's not a cell phone. Need PC3000 Udma or similar. And know what to do.