MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
BGman
 Post subject: Strange ST3160813AS
PostPosted: June 22nd, 2009, 5:38 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
The drive is not recognized by BIOS (BUSY all the time), but the strange thing is that it does not show up in the terminal . Sometimes only a letter p appears and that is all.
I've got a good 320GB drive of the same family, so I checked the terminal setting - everything is fine. I checked the PCB by swapping the FLASH chips. The PCB is OK.

Any suggestions about the cause of this strange behaviour ?
Top
 Profile  
 
BlackST
 Post subject: Re: Strange ST3160813AS
PostPosted: June 22nd, 2009, 6:16 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Bad mcu/ram or pcb ko. Check parts.
Top
 Profile  
 
BGman
 Post subject: Re: Strange ST3160813AS
PostPosted: June 22nd, 2009, 7:33 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
BlackST wrote:
Bad mcu/ram or pcb ko. Check parts.



What stands for "mcu/ram or pcb ko" ? :shock:

The PCB is working fine with the other (320GB) drive.
Top
 Profile  
 
Samo
 Post subject: Re: Strange ST3160813AS
PostPosted: June 25th, 2009, 3:27 
Offline

Joined: September 27th, 2005, 4:26
Posts: 505
Location: Bulgaria, Sofia
Can you access F> ?
Also did you try the other pcb on "bad" drive?

_________________
DataRecovery.bg
Top
 Profile  
 
BGman
 Post subject: Re: Strange ST3160813AS
PostPosted: June 26th, 2009, 9:29 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
Samo wrote:
Can you access F> ?
Also did you try the other pcb on "bad" drive?


F> is not accessable with and without HDA.

The other pcb behave the same way as the native.

FW : CC2F
Top
 Profile  
 
fg2000
 Post subject: Re: Strange ST3160813AS
PostPosted: July 4th, 2009, 7:44 
Offline

Joined: August 4th, 2008, 6:50
Posts: 1
HI,
My 7200.11 has similar problem either, I can not get access to the HDD through the COM port.
Top
 Profile  
 
BGman
 Post subject: Re: Strange ST3160813AS
PostPosted: July 6th, 2009, 3:13 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
fg2000 wrote:
HI,
My 7200.11 has similar problem either, I can not get access to the HDD through the COM port.


What is the firmware revision of your drive?
Top
 Profile  
 
quasimodo
 Post subject: Re: Strange ST3160813AS
PostPosted: July 6th, 2009, 15:42 
Offline

Joined: October 23rd, 2006, 8:56
Posts: 1336
BGman wrote:
Samo wrote:
Can you access F> ?
Also did you try the other pcb on "bad" drive?


F> is not accessable with and without HDA.

The other pcb behave the same way as the native.

FW : CC2F



If I remember this drive can be short curcuited to force F> access. But you better get one of the Guru's to confirm this.
Top
 Profile  
 
quasimodo
 Post subject: Re: Strange ST3160813AS
PostPosted: July 6th, 2009, 15:43 
Offline

Joined: October 23rd, 2006, 8:56
Posts: 1336
fg2000 wrote:
HI,
My 7200.11 has similar problem either, I can not get access to the HDD through the COM port.


Your problem is mostlikley a different one. Do you use any professional tools?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 55 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group