Hi all !

I did some very stupid.
backed up all modules and groups from drive then written back, but...
only after power cycle i realized that ALL my tools
read module #33,#37,#A7 just a bunch of 00000 (nulls)

6Y080L04225611
Y2BX0VXE
N,M,C,A
YAR41BW0

it has no important data, i am just collecting some drives for playing with raid5
what do you know about this bug ? can i fix my drive somehow myself ?
(thinking about hot swap, just dont know what will the tools write)

What 'tools' do you have? According to that, we can do something.

Currently only have pc 3k v14.00 'russian', hddrepairer v2.0, m r t, and hddl
Planning to build the idegrabb soon

I would put a fresh FW and then selfscan it... (kills data but the drive can be usable again)
Be careful refreshing the FW.

Or you can switch to SA-C and SS from there that will rebuild fresh SA .

It can be done without selfscanning if the drive had no SA defects. (provided that only those 3 mods were zapped, everything else is fine)

pepe

_________________
Adatmentés - Data recovery

Thank you very much

I will try out them in the next few days, and report back