View topic - Excelstor Calisto 80GB J880

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Excelstor Calisto 80GB J880

Page 1 of 1

[ 8 posts ]

Previous topic | Next topic

Author

Message

marpac

Post subject: Excelstor Calisto 80GB J880

Posted: August 18th, 2009, 18:26

Joined: August 18th, 2009, 18:18
Posts: 2
Location: UK

Hi to all,

I have got an 80GB Excelstor, Calisto hard drive (details below):

Model: J880
Firmware Rev: PF20A21B
Date code: 20060623
0A29180

Drive spins up, but does not calibrate, well it tries to, but for some reason cannot.
Is there anyone who had same problem and dealt with successfully? Is there any chance to fix the drive so it gets detected?

Thank you in advance for your help.

Regards,
Martin.

Top

Post subject: Re: Excelstor Calisto 80GB J880

Posted: August 18th, 2009, 18:35

Joined: March 13th, 2005, 12:33
Posts: 872
Location: Dublin

AFAIK, this is a Hitachi/IBM remanufactured HDD.

Can you post a picture of the drive + PCB to confirm and further diagnose?

_________________
Data Recovery Ireland

Top

BlackST

Post subject: Re: Excelstor Calisto 80GB J880

Posted: August 19th, 2009, 1:24

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

I would better say "refurbished" than "remanufactured"...

Top

marpac

Post subject: Re: Excelstor Calisto 80GB J880

Posted: August 19th, 2009, 4:28

Joined: August 18th, 2009, 18:18
Posts: 2
Location: UK

As requested, below there are two pics attached.

Drive was open to check if there is any scratch, but there is no scratch on platter.
Using PC3k, when power is on, it shows BSY (green), and then both: DRD & DSC (green) as well.. but nothing happens apart from that. Drive ID cannot be read

Please let me know, what you think.

Regards,
Martin.

Attachments:

P1010185.JPG [ 383.11 KiB | Viewed 5967 times ]

P1010186.JPG [ 459.56 KiB | Viewed 5965 times ]

Top

beto

Post subject: Re: Excelstor Calisto 80GB J880

Posted: August 19th, 2009, 9:03

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico

well DRDY DSC, means reach readiness, but maybe its Aborting all commands, tried to read any sector and check what did u get on ATA registers

Top

rafaela

Post subject: Re: Excelstor Calisto 80GB J880

Posted: August 19th, 2009, 9:25

Joined: February 1st, 2008, 17:01
Posts: 208
Location: Europe Greece

if you want any help about the "ExcelStor" drive PM ...

* dont listen the BlackST , leave on another Planet

Xronis

_________________
T3 Professional Data Recovery
http://www.t3-recovery.com

Top

BlackST

Post subject: Re: Excelstor Calisto 80GB J880

Posted: August 19th, 2009, 11:46

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

Xronis.... leave "RAKI" instead ... :mrgreen:

you nasty boy !!

Top

Tomset

Post subject: Re: Excelstor Calisto 80GB J880

Posted: August 21st, 2009, 11:00

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow

0A29180 BA1686_ - HDS728080PLAT20

Top

Page 1 of 1

[ 8 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 76 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum