View topic - Maxtor diamond max plus 9 80gb

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Maxtor diamond max plus 9 80gb

Page 1 of 1

[ 6 posts ]

Previous topic | Next topic

Author

Message

crecomp

Post subject: Maxtor diamond max plus 9 80gb

Posted: October 18th, 2009, 20:01

Joined: November 9th, 2006, 22:36
Posts: 344

hi all
i have a drive thatg would not show id and any data.
i started with pc3000 and was able to use the recovery tool to get the drive to show below

HDD Recovery thru LDR uploading
LDR downloading......................... : Ok
1B overlay loading...................... : Ok
1C overlay loading...................... : Ok
ROM Copy loading........................ : Ok
HDD Soft Reset
Overlaies loading....................... : Ok
HDD Soft Reset
LDR Loading............................. : Ok
Model................................... : Maxtor CALYPSO
FW...................................... : YAR41BW0

Roadmap reading......................... : Ok
Zone allocation table reading........... : Ok
DISK module initialization from recovery : Ok
Model................................... : Maxtor 6Y120L3
FW...................................... : YAR41BW0
Heads map............................... : 3

SA Defects checking Copy0............... : Module 37 reading error. UBA 4 (1) reading error. Drive is not ready
SA Defects checking Copy1............... : Module 37 reading error. UBA 44908 (1) reading error. Drive is not ready
SA Defects reading error
DISK reading............................ : DISK (Copy0) reading error: Module 1F reading error. UBA 8 (1) reading error. Drive is not ready
DISK reading............................ : DISK (Copy1) reading error: Module 1F reading error. UBA 15936 (1) reading error. Drive is not ready
DISK module initialization.............. : Module DISK reading error
Recovery process has been interrupted

from there i cant go any further.
during drive startup it will clikc and spin down several times and then show me the above after the firmwre repair.

after it starts up it bewcmoes ready, stops clickng but cant go any firther.

any thoughts will eb appreciated.

thank yuo

Top

harddrivespecialist

Post subject: Re: Maxtor diamond max plus 9 80gb

Posted: October 18th, 2009, 20:25

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA

Fix SA

_________________
www.datarecoveryne.com

Top

crecomp

Post subject: Re: Maxtor diamond max plus 9 80gb

Posted: October 18th, 2009, 20:52

Joined: November 9th, 2006, 22:36
Posts: 344

just noticed there is a big scratch on the drive right where the heads are parking.

any hope ?

Top

networkpc3000

Post subject: Re: Maxtor diamond max plus 9 80gb

Posted: October 18th, 2009, 21:47

Joined: December 16th, 2007, 10:26
Posts: 1151

crecomp wrote:

just noticed there is a big scratch on the drive right where the heads are parking.

any hope ?

hi,
are you sure head is ok?

_________________
data recovery service[/b]

Top

harddrivespecialist

Post subject: Re: Maxtor diamond max plus 9 80gb

Posted: October 18th, 2009, 23:30

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA

There is always hope. In this situation also.

_________________
www.datarecoveryne.com

Top

N.C.

Post subject: Re: Maxtor diamond max plus 9 80gb

Posted: October 19th, 2009, 1:20

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary

crecomp wrote:

just noticed there is a big scratch on the drive right where the heads are parking.

any hope ?

I have a solution in this case.
If you interested....

PM me.

Janos

Top

Page 1 of 1

[ 6 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: ccc and 107 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum