Hi
i have a problem with Hp Proliant Ml350 G5 Smart Array Controller E200i Raid 5 was configured in 4 HDD's first Drive gone Bad i replace Damage Drive to New Drive with same Capacity and Model it is not taking showing Drives Disable do i have to Try Hot-plug Appreciate for All Comments Thanks in Advance.

Q: Is the data important ?

_________________
If you can keep your head when all about you are losing theirs, you probably don't fully understand the situation. ... Mr Kipling

https://www.mjm.co.uk/

Thanks for Reply yes data is very Important.

can you show your screen here ?

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

If data is very important .. Look at sending it to a professional service .. It will cost but your data should be safe..

_________________
If you can keep your head when all about you are losing theirs, you probably don't fully understand the situation. ... Mr Kipling

https://www.mjm.co.uk/

Thanks for u r Advice but i want to Do it my self please Help me.

At this time you have the data in the other disks.

If you dont know what you are doing, you are putting the data in risk.

Read this :
diy-what-the-big-deal-t12671.html

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

Check your PM

Mathew

I cloned 3 Drives 1 is Bad i have Backup i can Try now.

Try with R-Studio Raid Rebuild.

get data back raid rebulider give that a try

total free

well there is a better way microsoftengineer
PM for more details..

thnx

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

Thanks for all your comments this case has been done long back.