MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Previous topic | Next topic 
Author Message
shahij
 Post subject: Drive PCB Without ROM submitted
PostPosted: December 21st, 2009, 15:39 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1056
Location: Bangladesh
any idea?
7200.10 drive from client, without the ROM in PCB...

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
harddrivespecialist
 Post subject: Re: Drive PCB Without ROM submitted
PostPosted: December 21st, 2009, 17:00 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
I won't be surprised if there some other issues with a drive besides a ROM chip.

_________________
www.datarecoveryne.com
Top
 Profile  
 
shahij
 Post subject: Re: Drive PCB Without ROM submitted
PostPosted: December 22nd, 2009, 3:55 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1056
Location: Bangladesh
the ROM CHIP was removed already from the PCB while client submitted the drive.

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
hddguy
 Post subject: Re: Drive PCB Without ROM submitted
PostPosted: December 22nd, 2009, 4:12 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
The ROM on 7200.10 does not contain adaptives unique to the drive, so matching compatible ROM will allow for compatibility. If you can not get original ROM, I would start by trying to find donor PCB with matching code eg. 100406541. Alternatively if you have large collection of ROM resources for 7200.10 you can try several to try find a match.

You will need to verify compatibility via Terminal output as I have a feeling there may be other problems also :(
Top
 Profile  
 
pepe
 Post subject: Re: Drive PCB Without ROM submitted
PostPosted: December 22nd, 2009, 18:16 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4788
Location: Hungary
Am I wrong thinking that SA location varies on .10 and it is hardcoded in the ROM?

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
hddguy
 Post subject: Re: Drive PCB Without ROM submitted
PostPosted: December 23rd, 2009, 4:44 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
pepe wrote:
Am I wrong thinking that SA location varies on .10 and it is hardcoded in the ROM?

pepe


Maybe you are right, I am not totally sure. I have had some success in PCB replacement without ROM soldering, but also some cases where ROM transfer is needed. Maybe with .10 it is possible to simply get lucky :)
Top
 Profile  
 
HDD Spaz
 Post subject: Re: Drive PCB Without ROM submitted
PostPosted: December 23rd, 2009, 4:49 
Offline

Joined: October 13th, 2008, 7:29
Posts: 1493
you have to be very lucky if SA location is the same but it is possible, I've had some success with Travelstars without changing ROM. (1 out of 300!)
Top
 Profile  
 
hddguy
 Post subject: Re: Drive PCB Without ROM submitted
PostPosted: December 23rd, 2009, 4:53 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
HDD Spaz wrote:
you have to be very lucky if SA location is the same but it is possible, I've had some success with Travelstars without changing ROM. (1 out of 300!)


Were your hands sore after changing 300 PCBs :lol:
Top
 Profile  
 
HDD Spaz
 Post subject: Re: Drive PCB Without ROM submitted
PostPosted: December 23rd, 2009, 4:54 
Offline

Joined: October 13th, 2008, 7:29
Posts: 1493
hddguy wrote:
HDD Spaz wrote:
you have to be very lucky if SA location is the same but it is possible, I've had some success with Travelstars without changing ROM. (1 out of 300!)


Were your hands sore after changing 300 PCBs :lol:



Ok, I should have mentioned over the course of a few years. lol.
Top
 Profile  
 
viktdev
 Post subject: Re: Drive PCB Without ROM submitted
PostPosted: December 23rd, 2009, 6:54 
Offline

Joined: February 9th, 2009, 6:19
Posts: 40
Location: Earth
I've made interesting experiences with seagate drives in the past. I didn't understand why SA location changed after a selfscan. In fact tracks change but gray code always seems to be the same. Reading the rom after the selfscan showed no differences... In drives with the same firmware revision, gray codes seems to be constant but, tracks are different and pcb swap is possible without swapping rom. But these drives were not .10
Top
 Profile  
 
shahij
 Post subject: Re: Drive PCB Without ROM submitted
PostPosted: December 23rd, 2009, 7:43 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1056
Location: Bangladesh
thx all for cooperation, i will let you know updates

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 78 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group