ST500DM002 terminal output

Data recovery and HDD repair discussions

Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
crystalrajasthan

ST500DM002 terminal output

November 14th, 2014, 2:55

I have ST500DM002 Sata hdd. Hdd spins smoothly without any noise and spin down. I have try to access the terminal it shows the error....

Spin Up[0x00000000][0x00000000]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMM
FAIL Servo Op=0155 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0055 Resp=0005x[0x00025CB4][0x00025CB4]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWYWYWWMMMMMM
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0155 Resp=0005x[0x0000B319][0x0000B319]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMM
FAIL Servo Op=0155 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0055 Resp=0005x[0x00030FCD][0x00030FCD]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWYWYWWMMMMMM
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0155 Resp=0005x

After shorting pin points hdd showing it size 3.86 GB

So help us to access the data of the hdd......
pcimage
  • pcimage
  • Posts: 7864
  • Joined: November 29th, 2006, 10:08
  • Location: UK
  • Website

Re: ST500DM002 terminal output

November 14th, 2014, 3:08

Looks like suspect heads to me.
oliverpep
  • oliverpep
  • Posts: 4
  • Joined: November 18th, 2014, 21:54
  • Location: China

Re: ST500DM002 terminal output

November 18th, 2014, 22:03

Author,which type command line do you get the firmware info?
crystalrajasthan

Re: ST500DM002 terminal output

November 19th, 2014, 1:33

Seagate Barracuda ST3500DM002
F/W=KC48
P/N=1BD142-303
Date code=13485
Made in Thailand
oliverpep
  • oliverpep
  • Posts: 4
  • Joined: November 18th, 2014, 21:54
  • Location: China

Re: ST500DM002 terminal output

November 20th, 2014, 1:10

crystalrajasthan wrote:Seagate Barracuda ST3500DM002
F/W=KC48
P/N=1BD142-303
Date code=13485
Made in Thailand

Author,I am sorry and give you a wrong meanI want to know your information of TTL adopter.such as chip type.etc.
data-medics

Re: ST500DM002 terminal output

November 20th, 2014, 14:18

pcimage wrote:Looks like suspect heads to me.

+1
mikail13
  • mikail13
  • Posts: 210
  • Joined: December 14th, 2013, 17:10
  • Location: istanbul

Re: ST500DM002 terminal output

November 26th, 2015, 18:39

data-medics wrote:
pcimage wrote:Looks like suspect heads to me.

+1


No. i had same error.

then i short two pins and press ctrl+z
F3 T> came..

but timing is very important..

i try at least 20 times. it was very hard.

but all my data came.
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index