View topic - ST500DM002 terminal output

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST500DM002 terminal output

Page 1 of 1

[ 7 posts ]

Previous topic | Next topic

Author

Message

crystalrajasthan

Post subject: ST500DM002 terminal output

Posted: November 14th, 2014, 2:55

Joined: October 8th, 2012, 5:29
Posts: 44
Location: India

I have ST500DM002 Sata hdd. Hdd spins smoothly without any noise and spin down. I have try to access the terminal it shows the error....

Spin Up[0x00000000][0x00000000]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMM
FAIL Servo Op=0155 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0055 Resp=0005x[0x00025CB4][0x00025CB4]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWYWYWWMMMMMM
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0155 Resp=0005x[0x0000B319][0x0000B319]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMM
FAIL Servo Op=0155 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0055 Resp=0005x[0x00030FCD][0x00030FCD]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWYWYWWMMMMMM
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0155 Resp=0005x

After shorting pin points hdd showing it size 3.86 GB

So help us to access the data of the hdd......

Top

pcimage

Post subject: Re: ST500DM002 terminal output

Posted: November 14th, 2014, 3:08

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Looks like suspect heads to me.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

oliverpep

Post subject: Re: ST500DM002 terminal output

Posted: November 18th, 2014, 22:03

Joined: November 18th, 2014, 21:54
Posts: 4
Location: China

Author,which type command line do you get the firmware info?

Top

crystalrajasthan

Post subject: Re: ST500DM002 terminal output

Posted: November 19th, 2014, 1:33

Joined: October 8th, 2012, 5:29
Posts: 44
Location: India

Seagate Barracuda ST3500DM002
F/W=KC48
P/N=1BD142-303
Date code=13485
Made in Thailand

Top

oliverpep

Post subject: Re: ST500DM002 terminal output

Posted: November 20th, 2014, 1:10

Joined: November 18th, 2014, 21:54
Posts: 4
Location: China

crystalrajasthan wrote:

Seagate Barracuda ST3500DM002
F/W=KC48
P/N=1BD142-303
Date code=13485
Made in Thailand

Author,I am sorry and give you a wrong meanI want to know your information of TTL adopter.such as chip type.etc.

Top

data-medics

Post subject: Re: ST500DM002 terminal output

Posted: November 20th, 2014, 14:18

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI

pcimage wrote:

Looks like suspect heads to me.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company

Top

mikail13

Post subject: Re: ST500DM002 terminal output

Posted: November 26th, 2015, 18:39

Joined: December 14th, 2013, 17:10
Posts: 210
Location: istanbul

data-medics wrote:

pcimage wrote:

Looks like suspect heads to me.

No. i had same error.

then i short two pins and press ctrl+z
F3 T> came..

but timing is very important..

i try at least 20 times. it was very hard.

but all my data came.

Top

Page 1 of 1

[ 7 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 44 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum