samsung sp0411 N all modules OK Where is Problem?

[chipsang]

Hi I am operating samsung hard disk and read SA but unable to identify problem area .Data Extractor is not working for this hdd.
Where could be the problem?

Family selected: PANGO
Model................................... : SP0411N

Technological ID
Data waiting timeout
Techno passport not loaded
Zone allocated table not loaded!
SA SPT.................................. : 928

Modules table used by default


Read ROM via terminal
Into folder............................. : <HDD Profile>\Data\ROM
No HDD response

Reading modules
Into folder............................. : <HDD Profile>\Data\Modules
00 FSI.................................. : OK
02 FIT.................................. : OK
04 MLIST................................ : OK
05 SRVTBL............................... : OK
64 SKTIME3.............................. : OK
61 MODELID.............................. : OK
06 CONFIG............................... : OK
07 SNTBL................................ : OK
08 BISPT................................ : OK
09 BRSLT................................ : OK
0A CRITERIA............................. : OK
0B FINALTST............................. : OK
0C ARCOTBL.............................. : OK
0D GEO_TBL.............................. : OK
0E VLISTHDR............................. : OK
0F VLIST................................ : OK
10 SLISTHDR............................. : OK
11 SLIST................................ : OK
12 TLIST................................ : OK
13 ALIST................................ : OK
15 SETMAX............................... : OK
16 SECURITY............................. : OK
17 SRVTBL2.............................. : OK
18 ARCOTBL2............................. : OK
14 TMPRTR............................... : OK
19 OVERLAY.............................. : OK
5A VL40CODE............................. : OK
5B VL40CHN.............................. : OK
29 DLIST................................ : OK
41 SPESB0............................... : OK
42 SPESB1............................... : OK
43 SPESB2............................... : OK
44 SPESB3............................... : OK
45 SPESB4............................... : OK
1A HDAF_RPT............................. : OK
1B HD_DLIST............................. : OK
1C LATCHFRC............................. : OK
1D RCOSCRPT............................. : OK
1F ERRTRK............................... : OK
20 ERRZN................................ : OK
21 ERRDRV............................... : OK
22 SRTDATA.............................. : OK
23 SRTSRVO.............................. : OK
24 SCN_GRAY............................. : OK
25 PARAM................................ : OK
26 WKHEAD............................... : OK
27 TSTPI................................ : OK
28 MRTUNEMT............................. : OK
1E BTIME................................ : OK
53 MRRTABLE............................. : OK
54 NPV_RSLT............................. : OK
56 ARCOTBL3............................. : OK
62 BPITEST.............................. : OK
63 ARCOTBL4............................. : OK
2A GEO_00............................... : OK
2B TST_ZH............................... : OK
2C GEO_ZH............................... : OK
47 CAPSEL............................... : OK
48 CURBPI............................... : OK
49 AZLCSM............................... : OK
4A AZL_CSM0............................. : OK
4B AZL_CSM1............................. : OK
4C AZL_CSM2............................. : OK
4D AZL_CSM3............................. : OK
4E AZL_CSM4............................. : OK
4F AZL_CSM5............................. : OK
50 AZL_CSM6............................. : OK
2D AZLBPI............................... : OK
2E AZL_BPI0............................. : OK
2F AZL_BPI1............................. : OK
30 AZL_BPI2............................. : OK
31 AZL_BPI3............................. : OK
32 AZL_BPI4............................. : OK
33 AZL_BPI5............................. : OK
34 AZL_BPI6............................. : OK
52 INSTABHD............................. : OK
57 ATE.................................. : OK
58 WII.................................. : OK
59 TPTP................................. : OK
51 SPSTW................................ : OK
36 RCO_LOG.............................. : OK
5C TSTPI2............................... : OK
5D BPITEST2............................. : OK
5E ATE2................................. : OK
5F TPTP2................................ : OK
60 BRSLT2............................... : OK
66 BER2................................. : OK
37 SMART................................ : Read sector error (c:11,h:0,s: 2) (UNC)
38 SMRT_LOG............................. : Read sector error (c:11,h:0,s: 3) (UNC)
39 SMRT_TST............................. : OK
3A SMRT_HLG............................. : OK
3B BIAS_SHK............................. : OK
3D ELOG................................. : OK
46 BIMODAL.............................. : OK
3F SV_TRACE............................. : Read sector error (c:20,h:0,s: 1) (AMN)
40 PES_LOG.............................. : Read sector error (c:20,h:0,s: 11) (AMN)
3E IPC_DBG.............................. : Read sector error (c:20,h:0,s: 302) (AMN)
5C PMP.................................. : OK
Test completed

[darkforce1]

Technological ID
Data waiting timeout
Techno passport not loaded
Zone allocated table not loaded!
SA SPT.................................. : 928

some problem is there
df

[chipsang]

Thank you Darkforce
As i am from india these drives are common and problem must be in f/w . Thanks a lot for your quick reply
Regards
Chipsang

[darkforce1]

I am also from India. You are which city

DF

[thinclient]

I have samsung sv4002h Hard disk drive.
Not coming readiness in the original controller. I have same type of donor controller. Using donor controller it gives readiness, but at the soft reset it give busy with drd and dsc.

and gives Technological ID - Data waiting time out.
Data waiting timeout error comes in the every module read.

I have tried of 3-4 same type card. but same errors come.

Data is important.

Thanks,
amit shah

[BlackST]

@thinclient, check the ROM content. Also, make sure for head working. Have you checked terminal ?

[thinclient]

I have changed the Rom Ic at491024 from original to donor controller.

Now Terminal shows
UCalib done
Eng>

soft reset is ok
Hard reset is ok
but rom read or module read not possible every time hdd response time out. no hdde readiness type messages are coming.

thanks,
amit shah

[pcimage]

I just had the same drive, SP0411N, with exactly the same symptoms as the OP.

Drive came DRDY after maybe 30 seconds, and all modules OK. No user data though.

Swapped the platter into new chassis (with good head, as the head was underneath the platter, so easier to swap the platter).

Now the drive is imaging well, nice and fast.

So, must have been a weak head.

Sean

[chipsang]

Hi Sean Congrats
Its good you reached to the problem.So it was heads .This will help everyone in future.
Thanks
Chipsang

[unknown]

very intelligent pcimage