MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 4 of 4
  [ 72 posts ]  Go to page Previous  1, 2, 3, 4
  Previous topic | Next topic 
Author Message
N.C.
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: June 12th, 2009, 12:05 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
ccc wrote:
Also try to look at this post:
7200-stuff-mess-t12153.html#p79225
It may help you....Or try to rewrite the 4 sector of vendor track...
Rgds


Unfortunately not works, this is a 7 series drive....
I have the Salvation Seagate Doctor only, wich is a s**t. :D
I have no backup from the vendor track, only the modules, wich is in the tool.

So, maybe the 4 sector is inside somewhere in the modules, but this takes too much time to invetigate how can i select this and where to write up. :|
Top
 Profile  
 
drc
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: June 12th, 2009, 13:08 
Offline

Joined: August 12th, 2008, 13:11
Posts: 3235
Location: USA
Check your PM. :mrgreen:

_________________
You don't have to backup all of your files, just the ones you want to keep.
Top
 Profile  
 
N.C.
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: June 12th, 2009, 13:20 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
Got it, thanks. :mrgreen:
Top
 Profile  
 
rameez
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: June 18th, 2009, 22:57 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
try F,,1 instead of F
that will set stuff values no matter what .
Top
 Profile  
 
drc
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: June 19th, 2009, 0:38 
Offline

Joined: August 12th, 2008, 13:11
Posts: 3235
Location: USA
Another answer is that salvation tool backs up 4th sector of vendor track as a "module", they just call it something silly and don't mention it anywhere.

_________________
You don't have to backup all of your files, just the ones you want to keep.
Top
 Profile  
 
N.C.
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: June 18th, 2010, 11:40 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
Gurus,

I am searching for loader or modules or any resources for snowmass (barracuda IV) 80GB AMK 3.10.
If you have any for this, please let me know

Thanks.
Janos
Top
 Profile  
 
N.C.
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: June 19th, 2010, 9:37 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
problem solved without resources. :)
Thank you for who taking time to check it for me....
Top
 Profile  
 
pclab
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: August 17th, 2010, 13:38 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal
Hi

I have the same problem:

Interface task reset
4096k x 16 SDRAM
TONKA15 - 1_Disk S.68 03-14-06 11:17

Buzz - Head Mask FFFF - Switch to full int.
Spin Ready
(P)SATA Reset

Stuff Was Unreadable3.AAH 03-14-06 11:19 AAH,35_S_5_S1,4T
(
T>

Does anyone have a FW for this model?
What should I put on the ASCIFE command, to do a "manual" reset? Where do I get that info?

Thanks

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
hddguy
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: August 18th, 2010, 4:47 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
What are you using for repairs? Also what is complete model, you will need to match capacity also if you plan to replace STUFF info.
Top
 Profile  
 
pclab
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: August 18th, 2010, 7:34 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal
Hi HDDGUY

I'm using SD Doctor.
The disk is a Barracuda 7200.9
P/N: 9BD133-304
FW: 3.AAH
Data Code: 06365

Thank You

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
rameez
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: August 18th, 2010, 11:39 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
ASCIFE dont work on this model , rewrite vendor track of any hdd of same model .
Top
 Profile  
 
pclab
 Post subject: Re: General (and not general)Seagate questions - for everyone :)
PostPosted: August 18th, 2010, 13:59 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal
I think it's solved.

Uploaded the module INFO, and I already could do a Surface Scan.

I just need to connect it to a PC (they are all busy now...) to check if it's OK.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 4 of 4
  [ 72 posts ]  Go to page Previous  1, 2, 3, 4

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 58 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group