View topic - HTS541080G9AT00

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

HTS541080G9AT00

Page 1 of 1

[ 6 posts ]

Previous topic | Next topic

Author

Message

pclab

Post subject: HTS541080G9AT00

Posted: June 20th, 2011, 4:41

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal

Hi

I have this HD that doesn't spin up with is PCB. I have tried a similar one, and it spins OK, so I need to change PCB.
What do I need to check for compatibility? Number of the PCB only? Then, just swap the U6 chip, or anything else?? Send PM :mrgreen:

Thanks

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

pcimage

Post subject: Re: HTS541080G9AT00

Posted: June 20th, 2011, 6:40

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Check fuse F1 first, if not...

Match 1st two lines of PCB and swap NVRAM chip.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

pclab

Post subject: Re: HTS541080G9AT00

Posted: June 20th, 2011, 7:00

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal

Hi Pcimage

Fuse is OK unfortunately :mrgreen:

Gonna find a PCB.

Thanks for your help.

:wink:

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

Nick_CT

Post subject: Re: HTS541080G9AT00

Posted: June 20th, 2011, 7:54

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa

Gives you a good opportunity to use your new heat gun from Eric Lee

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town

Top

positivebit

Post subject: Re: HTS541080G9AT00

Posted: June 20th, 2011, 11:49

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy

Nick_CT wrote:

Gives you a good opportunity to use your new heat gun from Eric Lee

somebody say to use fluxant when de-soldering with hot air, i always made it without ( i do not have to clean the pins afterwards )

Top

einstein9

Post subject: Re: HTS541080G9AT00

Posted: June 20th, 2011, 12:36

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait

positivebit wrote:

Nick_CT wrote:

Gives you a good opportunity to use your new heat gun from Eric Lee

somebody say to use fluxant when de-soldering with hot air, i always made it without ( i do not have to clean the pins afterwards )

FLUX also prevents messing points BTW
IT IS A MUST for any Pro. electronics workshop

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

Top

Page 1 of 1

[ 6 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1088 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum