Yep, I know what your saying though.

Not much to derive from some simple text on a computer monitor.

Well as long as he pays my boss, so I get my commission, then I have no worries. if not, my Sup can take up legalities with the customer.


But thanks anyways. I appreciate all of your hard work and time.

This password is incorrect.

I explained to my customer that he may not be able to get the data from his drive recovered, and he said that would be fine, but not proffered.

He said it's his Laptop and did not steal this system. and he doesn't seem the type to me anyhow, he's in the Marine Corp.

So it's either this, or if anyone knows a way to just wipe the drive all together without saving the data, for a fresh start, I'm open to all suggestions.

There are different ways of entering the password but you have never said which input method you are using. It is worth reading through the thread again or even searching through this and other threads on the same subject and you will see what i mean.

@shredderofdabc:

With respect, I believe that statement to be false. IMHO the password given to you by dick is correct - but as I pointed out previously, the customer will likely only be able to use it, when entered in the same way as he set it originally. How can he not know how he set the password (and not recognise that password!), if it's his laptop and he set the password?

Well I tried entering it in hdat2, and mhdd 4.6, and they pop up with either Fail (mhdd) or action cancelled in hdat2.

I wanted to try zu.exe, but the current system I'm working on does not have an Intel chipset on the Main Board.

The customer claims he has no idea how it happened, he said he turned on his Lenevo, it stalled on booting, so he restarted and it was locked up on him.

Either way though, I don't like the situation he's put me in, I have worked for days on his drive, and I think the whole situtation stinks to high heaven. I think I should inform the customer it's not possible, not to mention the simple fact that a drive like this is probably around 40$ to buy brand new and our services are based off of hourly repair and cost and any items being replaced, and I can definitly tell you he's spent more than the cost of a new drive with us and then some.

So I'm gonna call it a dead drive and tell the customer it's a bricked up and see if he'll just purchase one of hours as a replacement.

But thanks guys I really appreciate your help again. You guys are awesome I couldn't have asked for better help on a post. Thanks.

h2oinsyde worked for me as the master password to unlock a ATA WD16000 on an emachine. Along with the use of MHDD.exe Thanks for the help

Correct - because neither of those was likely the method which was used to lock the drive.


And so he's claiming that his laptop somehow managed to set a short English word as a hard disk password, as part of a malfunction?! This seems unbelievable, IMHO, given the specific ATA commands which are needed in ordeer to set a drive password.

My opinion (and, of course, that's all it is) remains that, on balance of probabilities, the customer is not the laptop owner (or at the very least, he is not telling the truth about what happened, and is not doing all he could to convince us that he is the owner, thereby leaving the appearance that he isn't).

Hi everyone,

could someone plz find the password for my wd1600BEVS?
attached the 22.bin

THX

Look at line 150 and forth.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

line 150 to???

Line 130

_________________
A backup a day keeps DR away.

Sure?

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

FRANKLy, yes.

_________________
A backup a day keeps DR away.

lol

_________________
You don't have to backup all of your files, just the ones you want to keep.

to unlock the MHDD as I do?

I fail

How did you set the password originally?

scusate volevo postare qui....
mi aiutate wd 1600bevt
noin riesco con password qiesto è il mio 22.bin.

sto impazzendo ho provatoi anche con victoria 4.2 ma "get drive error"

mi aiutate vi prego

[img][/img]

questo scusate per prima che non si vedeva....

grazie grzie

ho provato la user wdcwdcwdcwdcwdcwdcw niente da fare
mi aiutate comunque leggendo i post precedenti , vorrei trovare la password e non mi interessano i dati che sono caricati

la passw è stata impostata forse da mio nipote ad un EEpc 1001 PX ASUS

nessuna risposta.......

non mi volete aiutare????????'