MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 19 posts ] 
  Previous topic | Next topic 
Author Message
cinerus
 Post subject: Samsung HM501II
PostPosted: February 15th, 2012, 15:45 
Offline

Joined: February 15th, 2012, 15:39
Posts: 3
Location: Poland
Hi, can anybody explain this log plase ?
Samsung HM501II, BIOS does not recognize HDD

Code:
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
˙˙˙˙*PA VID=0007 PN=0000 Rev=0004
                                 *PA VID=0007 PN=0000 Rev=0004
                                                              ChipRev = 6B0
                                                                            U
S_0Shock Sensor Circuit Enabled
SO_1
Shock Sensor Circuit Enabled
IS=4
CLA #36/72
Handoff RPM=616
SPOK
mS1 00000003
A1O=127 A1G=445
O=511 S=4
SK C: 33968 H:0
Loaded FIT ( 0: 0: 1)
CalibTable Loaded. Rev:0x17
ResoTable Loaded. Rev:0x01
RRO1xTable Loaded. Rev:0x01
Ovly loaded to 0x0001CD00
Ovly loaded to 0x1005B800
FdtTable Loaded. Rev:0x02
Zh:0000005C Curr:0000007C
Zh:0000005C Curr:00000099
Zh:0000005C Curr:000000A6
Zh:0000005C Curr:000000A5
Zh:0000005C Curr:000000A6
Zh:0000005C Curr:00000098
Zh:0000005C Curr:000000A3
|  19 | RLIST    |  2 | 0 |  468 | 1140 |
Zh:0000005C Curr:00000095
Zh:0000005C Curr:0000009D
Zh:0000005C Curr:0000008E
Zh:0000005C Curr:00000082
Zh:0000005C Curr:00000096
Zh:0000005C Curr:00000091
|  19 | RLIST    |  2 | 1 |  468 | 1140 |
Zh:00000060 Curr:00000096
Zh:00000060 Curr:000000A1
Zh:00000060 Curr:0000009B
Zh:00000060 Curr:000000A4
Zh:00000060 Curr:00000098
Zh:00000060 Curr:000000A3
|  19 | RLIST    |  2 | 2 |  468 | 1140 |
Reading Serial Num Pass
Up MC

PwrOn RRO1x @ H0
Table) cos = -224512, sin = -110336
Coeff) cos = -32909, sin = -27027

DiskSlip : 23 [SrvTrk]
DiskSlip : 27 [SrvTrk]

PwrOn RRO1x @ H2
Table) cos = -221696, sin = -108032
Coeff) cos = -21865, sin = -16183

DiskSlip : 23 [SrvTrk]
DiskSlip : 25 [SrvTrk]
TgtCyl:     842
Hd:   0 Zn:   0 Avg.:-    140
TgtCyl:  174597
Hd:   0 Zn:   1 Avg.:     869

SVCAL(0080,0000)-->PASS
RecordValid Fail : 0107647D 0107E41D
EPOK
SoUL!
PK_4   C:  8496 H:0
Software unloading!
PK_4   C:  8496 H:0
LED 1A04
LED 1A04
...


Top
 Profile  
 
dmarques
 Post subject: Re: Samsung HM501II
PostPosted: February 15th, 2012, 16:41 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
That issue is related to a FW problem.
Top
 Profile  
 
pcimage
 Post subject: Re: Samsung HM501II
PostPosted: February 15th, 2012, 16:43 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
It's a firmware issue, can be fixed by pro with PC3000 UDMA latest version.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
dmarques
 Post subject: Re: Samsung HM501II
PostPosted: February 15th, 2012, 16:55 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
Yep. Just did not mention that :)
Top
 Profile  
 
pcimage
 Post subject: Re: Samsung HM501II
PostPosted: February 15th, 2012, 17:31 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
dmarques wrote:
That issue is related to a FW problem.


Beat me to it!! ;-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
BlackST
 Post subject: Re: Samsung HM501II
PostPosted: February 15th, 2012, 17:58 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
pcimage wrote:
It's a firmware issue, can be fixed by pro with PC3000 UDMA latest version.


Even without... :mrgreen:
Top
 Profile  
 
pcimage
 Post subject: Re: Samsung HM501II
PostPosted: February 15th, 2012, 18:01 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
BlackST wrote:
pcimage wrote:
It's a firmware issue, can be fixed by pro with PC3000 UDMA latest version.


Even without... :mrgreen:


Yes, that is true also! :-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
cinerus
 Post subject: Re: Samsung HM501II
PostPosted: February 16th, 2012, 3:57 
Offline

Joined: February 15th, 2012, 15:39
Posts: 3
Location: Poland
does the PCB replacement is a solution ?
HDD is under warranty but I need to recover data :roll:
Top
 Profile  
 
dmarques
 Post subject: Re: Samsung HM501II
PostPosted: February 16th, 2012, 4:21 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
I'm a peaceful guy, won't beat anyone :)

@cinerus: PCB replacement is not an option for this case.

If your data is really valuable you should go to a pro. At least you can get a quote.
Top
 Profile  
 
pcimage
 Post subject: Re: Samsung HM501II
PostPosted: February 16th, 2012, 7:43 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
cinerus wrote:
does the PCB replacement is a solution ?
HDD is under warranty but I need to recover data :roll:


PCB will not help

Assuming it is what we think it is, repair should be reasonable price.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
cinerus
 Post subject: Re: Samsung HM501II
PostPosted: February 16th, 2012, 12:49 
Offline

Joined: February 15th, 2012, 15:39
Posts: 3
Location: Poland
Ok, thanks guys.
@dmarques
I can't send any message via PM.
Please mail me at
Code:
email removed
Top
 Profile  
 
azzan
 Post subject: Re: Samsung HM501II
PostPosted: April 3rd, 2013, 13:08 
Offline
User avatar

Joined: April 3rd, 2013, 12:13
Posts: 25
Location: Tanzania
ok i agree its a firmware problem
but how to solve it by terminal commands ?
S_0SSC EN
SO_1
SSC EN
IS=6
CLA #36/75
Handoff RPM=688
SPOK
SR:50 SS:00000280
mS1 00000003
A1O=1 A1G=431
O=511 S=1
SK C: 5987 H:0
Loaded FIT ( 0: 0: 1)
CalibTable Loaded. Rev:0x1B
ResoTable Loaded. Rev:0x01
RRO1xTable Loaded. Rev:0x01
Fw Active 0000
Ovly loaded to 0x00014D00
Ovly loaded to 0x1002E300
FdtTable Loaded. Rev:0x02
| 19 | RLIST | 1 | 0 | 1270 | 1140 |
| 19 | RLIST | 1 | 1 | 1270 | 1140 |
| 15 | VLIST | 1 | 0 | 802 | 1140 |
Reading Serial Num Pass
Up MC

PwrOn RRO1x @ H0
Table) cos = 443904, sin = -530432
Coeff) cos = 28767, sin = -284792

DiskSlip : 74 [SrvTrk]
DiskSlip : 100 [SrvTrk]
TgtCyl: 832
Hd: 0 Zn: 0 Avg.:- 111
TgtCyl: 207552
Hd: 0 Zn: 1 Avg.: 1317

SVCAL(0080,0000)-->PASS
| 167 | DRM | 27 | 0 | 0 | 1140 |
RecordValid Fail : 4107647D 0107E41D
EPOK
SoUL!
PK_4 C: 10148 H:0
Software unloading!
PK_4 C: 10148 H:0
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
Top
 Profile  
 
hhddrec
 Post subject: Re: Samsung HM501II
PostPosted: April 4th, 2013, 10:17 
Offline
User avatar

Joined: August 13th, 2008, 13:10
Posts: 811
Location: World
i can see firmware issue, ercoverable with pro tools
Top
 Profile  
 
azzan
 Post subject: Re: Samsung HM501II
PostPosted: May 28th, 2013, 7:10 
Offline
User avatar

Joined: April 3rd, 2013, 12:13
Posts: 25
Location: Tanzania
i managed to fix it by swamping another PCB with same ROM

_________________
Azzan Shahid
No one is master in this world but only His Almighty
www.datarecoverytanzania.co.tz
Top
 Profile  
 
northwind
 Post subject: Re: Samsung HM501II
PostPosted: May 29th, 2013, 2:52 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
Unlikely.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
shahij
 Post subject: Re: Samsung HM501II
PostPosted: May 29th, 2013, 3:29 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh
It's not always for FW problem according to my experience.

It's sometime for A-LIST corruption, can be fixed without PC3K.

Sometime it's PCB failure.

I still have 1 case without solution (Under experiment if there is still other issue involved)

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
shahij
 Post subject: Re: Samsung HM501II
PostPosted: May 30th, 2013, 15:53 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh
Finally the pending case is also solved.

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
w.simon
 Post subject: Re: Samsung HM501II
PostPosted: May 30th, 2013, 16:23 
Offline
User avatar

Joined: October 29th, 2012, 15:03
Posts: 96
Location: France
hello shahij,

How did you manage to solve this two cases ?

Thanks

_________________
Récupération de Données
Top
 Profile  
 
hhddrec
 Post subject: Re: Samsung HM501II
PostPosted: September 10th, 2014, 5:35 
Offline
User avatar

Joined: August 13th, 2008, 13:10
Posts: 811
Location: World
I have this similar problem on a Samsung HM501II drive.
But Drive can not get Ready status.

When i power up the drive starts spinning and is clicking for about 5 min, then stops clicking sound and spin down

Any way?
I attach log.


Attachments:
Log100913.txt [196.65 KiB]
Downloaded 821 times
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 19 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 191 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group