MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Previous topic | Next topic 
Author Message
fireup6
 Post subject: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 15th, 2012, 18:08 
Offline

Joined: February 15th, 2012, 17:57
Posts: 5
Location: united states
I have a SATA WD5000CSRTL which spins fine. My power and data cables are fine (i test them with another HD).

It sounds like a working hard drive, except it's not recognized.

I'm fairly experienced with repairs (i repair mobo's for clients), but i have never bothered with hard drives. I'm interested in how i should go about diagnosing what the problem is.

Any advice (besides "take it to a pro" "understand DIY risks"...etc) would be appreciated. There is no valuable data, i want to learn how this situation would be diagnosed and fixed.

Thanks.
Top
 Profile  
 
einstein9
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 16th, 2012, 4:38 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2850
Location: Kuwait
what is the pcb # of this model?

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
dmarques
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 16th, 2012, 6:17 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
If you want to find info about the problem how to diagnose it, you should start reading some of the forum areas.

Seems your case could be firmware, but would have to be confirmed of course.
Top
 Profile  
 
fireup6
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 16th, 2012, 6:19 
Offline

Joined: February 15th, 2012, 17:57
Posts: 5
Location: united states
Engraved on the board:
PCB 100466725
Rev A DLAJ-4

On a sticker on the board it says:
100468972 H C906AQB6
Top
 Profile  
 
einstein9
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 16th, 2012, 6:22 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2850
Location: Kuwait
pcb # should start with 7xxxx
printed on the back side

send an image of it in addition to the full model # if possible

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
pcimage
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 16th, 2012, 7:41 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7865
Location: UK
fireup6 wrote:
Engraved on the board:
PCB 100466725
Rev A DLAJ-4

On a sticker on the board it says:
100468972 H C906AQB6


Seagate 7200.11 not WD

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
einstein9
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 16th, 2012, 7:52 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2850
Location: Kuwait
i know that, but his topic says WD
thats why i asked about the image + model

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
fireup6
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 16th, 2012, 14:18 
Offline

Joined: February 15th, 2012, 17:57
Posts: 5
Location: united states
This should help i believe:

http://i.imgur.com/CTuWh.jpg
http://i.imgur.com/5f74o.jpg
http://i.imgur.com/RqZFN.jpg
http://i.imgur.com/MVNwM.jpg
http://i.imgur.com/UXLQo.jpg
http://i.imgur.com/Pv7Yw.jpg
http://i.imgur.com/vJll5.jpg
http://i.imgur.com/BU3v8.jpg
http://i.imgur.com/mV2Yn.jpg
http://i.imgur.com/AjR0I.jpg
http://i.imgur.com/yRTau.jpg
http://i.imgur.com/fVI1e.jpg
Top
 Profile  
 
fireup6
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 16th, 2012, 14:20 
Offline

Joined: February 15th, 2012, 17:57
Posts: 5
Location: united states
It was given to me inside a WD Caviar Green box. That's why i thought it was a WD. I guess it's a Segate, sorry about that.
Top
 Profile  
 
fzabkar
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 17th, 2012, 4:02 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17238
Location: Australia
Seagate 7200.11 BSY bug and 0 LBA fix:
http://sites.google.com/site/seagatefix/
http://www.msfn.org/board/index.php?showtopic=128807
http://www.overclock.net/hard-drives-st ... -pics.html
http://forums.seagate.com/t5/Barracuda- ... 009/page/1

_________________
A backup a day keeps DR away.
Top
 Profile  
 
fireup6
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 19th, 2012, 2:39 
Offline

Joined: February 15th, 2012, 17:57
Posts: 5
Location: united states
Thank you very much. I created a R232-TTL adapter and fixed the drive. Everything is working great now.

Very interesting repair :lol:
Top
 Profile  
 
pcimage
 Post subject: Re: WD5000CSRTL spins, BIOS won't recognize it
PostPosted: February 19th, 2012, 7:43 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7865
Location: UK
Good work, well done!!!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 197 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group