MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Previous topic | Next topic 
Author Message
craigdf
 Post subject: Damage Fujitsu hard drive to repair
PostPosted: September 2nd, 2012, 12:23 
Offline

Joined: September 2nd, 2012, 12:07
Posts: 3
Location: cambridge, uk
Hi
I have got an Fujitsu 120GB 2.5" IDE hard drive. Model Number: MHT2120AT. The hard drive 5 volts got connected to 12 Volts and an IC on the PCB has Blown. Does anyone know what the IC is and can I replace it?

The IC is next to the coil and is an 8 pin IC - I think it is an voltage regulator???

I have attach an image of the PCB

Also there is an short between the 5volts to GNd

thanks


Attachments:
DSC03618.JPG
DSC03618.JPG [ 3.25 MiB | Viewed 4619 times ]
Top
 Profile  
 
unknown
 Post subject: Re: Damage Fujitsu hard drive to repair
PostPosted: September 2nd, 2012, 12:58 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Check TVS or replace the entire PCB with matched one and transfer the original ROM to the donor PCB.

Good luck
Top
 Profile  
 
mr_spokk
 Post subject: Re: Damage Fujitsu hard drive to repair
PostPosted: September 2nd, 2012, 13:46 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden
Try to check the fuse.

Bosse

[img]
Attachment:
DSC03618.jpg
[/img]


Attachments:
DSC03618.jpg
DSC03618.jpg [ 2.26 MiB | Viewed 4600 times ]

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se
Top
 Profile  
 
craigdf
 Post subject: Re: Damage Fujitsu hard drive to repair
PostPosted: September 2nd, 2012, 17:10 
Offline

Joined: September 2nd, 2012, 12:07
Posts: 3
Location: cambridge, uk
Hi
Thanks for the info.
The fuse is ok. I think the isue is the IC near the coil

does anyone know what the IC is and where I can get a replacement
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 50 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group